Concept, not a product. Concept generated by the GONGBANS inventor from the public catalogue, then expanded into a start pack. Not a product, not validated; every number (market, BOM, price, effort, certification cost) is a rough estimate to be checked, not a quote. Check each board's licence before commercial use. Not legal, tax or investment advice.

New here? Start here → explains what a gongban is, the four steps and the first-timer mistakes. Come back to this pack afterwards.

Effort (estimate)12–16 team-weeks
Unit BOM (estimate)€18–28
Price (estimate)€59–89
External market checkLikely
Boards referenced4 catalogue boards

Order of operations: read the summary, then validate demand (section 2) with real customers before you touch the start kit or e-mail anyone in Who to contact (section 5). New to hardware? The zero-experience founder playbook covers validation, samples, the first quote, CE/FCC, customs and fulfilment for all 50 ideas.

1 · Summary · the one-page version

Summary

  • Problem: Schools replace their dying analogue scopes with €30 pocket scopes that students can't operate and teachers can't teach with, or with €400+ bench scopes they can't afford sixteen of. Nobody designs a measurement tool for a 15-year-old and a 45-minute lesson.
  • Customer: Secondary-school physics departments and vocational schools in DE/NL/UK/Nordics; education-supply distributors as the channel. The school (or the department head with a budget) pays; teachers and students use it.
  • Product: A €59–69 handheld with ±30 V protected banana inputs (no mains, ever), scope + voltmeter + signal generator, an "experiment mode" that walks the class through RC charging, AC vs DC, sound waves, diode rectification, with USB export to the class spreadsheet; sold as 16-unit class sets with a charging box.
  • Why now: Four open scope/voltmeter designs with schematics and PCB exist in the catalogue, including a small handheld and an STM32H750-class portable; pocket scopes have proven the price point (FNIRSI DSO152 at ~€27–37, eleshop, aio.lv) but not the classroom; curricula push measurement and data literacy.
  • The ask: ~€90k (estimate) to the first 1,000 units; route = teacher trials → class-set pre-orders + bootstrap; education distributors for scale.

External market check (November 2026): LIKELY. Classroom pocket-oscilloscope kits exist (Velleman / Whadda WSEDU06 at about £19–38, ConsuLab uScope classroom sets), confirming a real buyer and category; the cheap options get mixed-to-poor reviews, while deeper alternatives (PicoScope) are bench instruments, not pocket kits, so a quality gap in the middle is plausible. Main risk: Needs to justify a two-to-three-times price premium over Whadda on quality and curriculum grounds. As researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast. Competitors and sources found: see the market check in the competition table.

2 · Validate demand · before anything else

Validate demand first

Do this before anything else in this pack: before the business plan, before you order a sample board, and long before you e-mail a factory (section 5). The classic first-time mistake is to source and build first and find out later that nobody wanted it. Hardware mistakes are slow and expensive to undo; 15–20 conversations are cheap.

The gate: this idea's kill question

Do 10 physics teachers order a 16-unit class set at €69 each after a one-lesson trial?

You pass this section when you can answer that question with evidence you collected yourself, not a guess: a measured conversion on a fake-door landing page for the consumer side and, for the business side, at least three decision-makers who put something on paper: a letter of intent, a paid pilot or a purchase order. Until then: no factory e-mail, no sample order, no firmware, no logo. If the answer is no, you have lost a few weeks and saved the rest.

Who you are looking for

The audience named in the idea: Secondary-school physics departments and vocational schools in DE/NL/UK/Nordics; educational distributors.

The problem as the pack states it: Schools replace their dying analogue scopes with €30 pocket scopes that students can't operate and teachers can't teach with, or with €400+ bench scopes they can't afford sixteen of. Nobody designs a measurement tool for a 15-year-old and a 45-minute lesson.

Talk to the people who have the problem and the people who pay; in B2B they are often not the same person, and the one who pays decides.

Where to find them

Communities and associations where this audience actually talks, as far as we know them in November 2026. Confirm each is still active and read its rules on self-promotion before posting; most allow a genuine question about a problem and ban a pitch.

  • r/ScienceTeachers · reddit.com/r/ScienceTeachers/ — secondary-school science teachers.
  • AAPT · aapt.org/ — American Association of Physics Teachers.
  • IOP, Institute of Physics (UK) · iop.org/ — UK physics teacher network and conferences.
  • MNU (DE) · mnu.de/ — German association of maths and science teachers; regional conferences.
  • Tes Community (UK) · community.tes.com/ — UK teachers' forum.

Beyond the named ones, the same four methods work for every idea on this site:

  • Search for communities around the problem, not the product: forums, Facebook groups, Discord servers and newsletters in your own country for the terms in the audience line above. Many of the best groups are national and in the local language; a Dutch or German group beats a global English one for an EU launch.
  • Trade associations and their regional meetings for the B2B audiences: one meeting puts twenty buyers in a room, and the association newsletter will often run a short survey for a member.
  • LinkedIn: search people by the job titles in the audience line, message ten a day with one question (not a pitch), and ask for twenty minutes. Expect one in five to say yes.
  • Your deposit list from the kill question and anyone who replied to the fake door: those are the first interviews, not the last.

The plan: 15–20 conversations, then a fake door

  1. 15–20 real conversations (ten buyers from the business side and ten from the consumer side), fifteen minutes each, using the script below. Before writing a line of code or ordering a board. Write up each one the same day: the problem in their words, what they do today, what it costs them, what they said when you named the price.
  2. A fake door. One page: the pitch as the headline, a rendered image or a photo of a cardboard mock-up, the price (€59–89, the pack's estimate), and one button. Two buttons: a refundable deposit or waitlist for consumers, "request a pilot" for businesses.
  3. Send it to everyone you interviewed and post it, with the problem question first, in the communities above. Run it for two to four weeks.
  4. Count against the kill question. Then decide: go, change the idea, or stop.

Interview script (fifteen minutes, problem first)

Ask, then be quiet. Do not describe the product until question 5; if you pitch first you will only hear politeness.

Pre-order / pilot message (forum post or direct message)

Reading the signal

Real signalFalse positive
A refundable deposit, a signed LOI, a paid pilot, a calendar invite for the prototype"Sounds cool", "I would totally buy that", likes and upvotes
They describe the problem unprompted and in detail, with numbersThey agree with your description of the problem
They have already paid for a workaround (a product, a service, their own time)They have never tried anything and are not bothered
Landing-page conversion to deposit or form above the pack's pass mark, from cold trafficConversion from friends, family and your own network
A named budget and a named decision-maker (B2B)An enthusiastic user who cannot buy

Go / no-go

  • Go to section 3 (business plan) and section 4 (start kit) when the kill question above is met by your own numbers, you have 15–20 written-up conversations, and at least one real signal from the left column per segment you plan to sell to. Only then does section 5 (Who to contact) apply.
  • Change the idea when the problem is real but the price, the buyer or the form factor in the pitch is wrong: the interviews will tell you which. Rewrite the pitch and run the fake door again; this is normal and costs a week.
  • Stop when the kill question fails on honest numbers, or when nobody you talked to has paid for a workaround. Pick another idea on this site; the boards in the start kit are not wasted, only unused.

The full worksheet, with how to define the segment and run the fake door, is in the playbook → validate demand.

3 · Business plan · estimates, not a forecast

Business plan

Problem & customer

The physics teacher has 16 benches, one lesson, 30 students and a cupboard of scopes from 1990. They need every bench to see a waveform in 3 minutes, students to record a value without breaking anything, and a worksheet that matches the device. The department head signs for €1,000–1,500 a year; a class set has to fit that. The distributor needs a catalogue SKU with CE, a spare-parts line, and a 3-year warranty.

Who pays vs who uses: the school pays via the distributor; teachers prepare, students use. The vocational school (electrical trades) is the second buyer with slightly higher specs.

Market size (estimates)

  • EU + UK: ~60k secondary schools and ~15k vocational schools (estimate); say 70% teach physics/electronics with a lab → ~52k schools; one class set each → 52k class sets × 16 = 830k units. Replacement every ~8 years.
  • TAM: 830k × €64 ≈ €53 M (+ class-set boxes, probes).
  • SAM: schools in DE/NL/UK/Nordics served by the distributors we can reach — ~35% → €18 M.
  • SOM (3 years): 3% of SAM → ~9,000 units (560 class sets) → €580k + accessories.

Competition

AlternativeNotesWeakness we attack
Pocket scopes (FNIRSI DSO152-class, €27–37; 200 kHz single-channel per atomic14)Cheap, surprisingly OKUnprotected inputs, cryptic UI, no curriculum, no class-set logistics, no export
Entry bench scopes (€300–500)Real instruments16 of them = €6k; mains-powered; 200-page manual
PC/USB scopes for education (PicoScope-class)Good softwareNeeds a PC per bench; price per seat
Phone apps + audio jack / "do nothing" with multimetersFreeCan't show a waveform safely; no AC measurement for most
Datalogger ecosystems from education suppliers (sensor + interface)Curriculum-aligned€200–400 per bench; closed; slow
DIY (DSO138 kits etc.)Teachers build them with studentsUnprotected, fragile, no export

Wedge: curriculum-first UI, protected banana inputs, class-set hardware (charging box, labelled units, spares), USB export to a spreadsheet, at pocket-scope money.

External market check

Competitors, demand signals and price comparables found by web search in November 2026. Sources are named as found and not linked; as researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast.

Who / sourceWhat it isWhat it tells us
Whadda WSEDU06 (Rapid Online)About £19–38 pocket scope kitCheap incumbent, mixed reviews
ConsuLab uScope classroom kitClassroom setIncumbent in the education channel
PicoScope Education KitBench instrument for schoolsUpper tier, different form factor

Verdict as researched: LIKELY. Main risk: Needs to justify a two-to-three-times price premium over Whadda on quality and curriculum grounds.

Product & value proposition

Hardware: 2.8" colour LCD, 2 analogue channels (one is enough for most lessons; two for phase/rectifier lessons), ~1 MSa/s class (audio to a few hundred kHz is all a school needs — say it), 4 mm shrouded banana inputs with ±30 V clamping and a fuse-less protection network, built-in signal generator (sine/square/triangle to 20 kHz) on a third banana pair, voltmeter mode (DC/AC RMS, 3.5 digits — the "5½-digit" open design informs the precision path but the school unit doesn't need it), Li-ion with USB-C, rubber bumper, lanyard. Software: Scope / Meter / Generator / Experiment modes; experiment mode shows a diagram, the expected curve, and a "record" button that writes a CSV; teacher dashboard = a USB "class box" that collects CSVs from 16 units and merges them into one sheet. Class set: 16 units, charging box, 16 lead sets, spares, teacher guide with 12 lessons.

Pricing (estimates): €69 single, class set of 16 at €999 (≈ €62/unit) with charging box, vocational variant €89 (higher bandwidth, 2 ch, probe clips). Distributors at 35–40% off.

Unit economics (estimates per unit, ex-VAT)

Item1k units5k units
Electronics BOM (MCU with ADC €2.5, analogue front-end + protection €3, 2.8" LCD €4.5, Li-ion + charger €3, banana jacks €2, PCB + passives €4)€19.00€15.00
Assembly & test (SMT, gain/offset calibration, protection test)€3.50€2.40
Enclosure (ABS + rubber bumper; tooling amortised)€3.80€2.40
Packaging (box, 2 lead sets, quick card; class-set box separate)€2.20€1.60
Freight + duty to EU (Li-ion)€2.00€1.30
Certification amortised (~€16k: EMC/LVD, EN 61010 input wording, UN 38.3, RoHS)€16.00€3.20
Landed cost€46.50€25.90
Sell price (direct €69 / distributor €42)€69€42
Gross margin€22.50 (33%)€16.10 (38% at distributor)

Honest: at 1k units this is thin. The class-set box (~€40 BOM, sold at €150 inside the set), lead sets, the vocational variant, and 5k+ volumes make it work. Don't launch below €69 single / €999 set.

Go-to-market

First 100 customers: 10 physics teachers who trial a 16-unit set for one lesson and then order (kill question) — found via physics-teacher associations and their conferences, teacher forums and social groups, university teacher-training departments; 2 education-supply distributors' product managers early (they tell you the price and the catalogue deadline); a lesson video shot in a real classroom.

Scale channels: education-supply distributors (the catalogues schools order from — their deadlines are 6–9 months before print), teacher-association conferences, vocational-school equipment suppliers, textbook publishers (worksheet bundles), national STEM programmes and grants.

12-month plan

QuarterMilestones
Q1Works-like from the mini handheld open design + protection front-end; experiment mode v0 (4 lessons); 10 teacher trials → class-set orders.
Q2Own PCB, tooled case, class box; EVT 100 (6 class sets); teacher guide v1 (12 lessons); pre-compliance; distributor samples.
Q3DVT, certification, 500-unit pilot (30 sets) for the autumn term; distributor listing for next catalogue.
Q41,000+ units; vocational variant EVT; second country's curriculum mapping.

Team: 1 embedded/analogue engineer (front-end, protection, firmware — full-time), 1 UI/educational-software developer (experiment mode, class box merge — part-time → full-time), a physics teacher-author on contract for the lessons, founder for distributors and teacher community. Three people.

Funding to first 1,000 units (estimates): NRE €42k (PCB €8k, case + class box tooling €16k, firmware/UI €12k, lesson content €6k) + certification €16k + 1,000 units landed ~€47k + 9 months overhead €55k ≈ €160k; minus class-set pre-orders (10 × €999 ≈ €10k), pilot sales (30 sets ≈ €28k) and a distributor's first order prepayment (~€30k) ≈ ~€90k. Bootstrap + pre-orders; STEM-education grants exist in most countries and fit the lesson-content part.

Top risks

RiskMitigation
Safety: a student connects it to mains±30 V clamping + series protection on every input; shrouded 4 mm jacks; no mains probes supplied; big "no mains" label; EN 61010 wording; the teacher guide forbids it
Technical: cheap ADC = noisy traces that confuse studentsOversampling, auto-set, averaging on by default; it's a teaching tool, not a 100 MHz scope — set expectations
Market: thin margin at low volumeClass-set pricing, accessories, vocational variant; don't do single-unit retail below €69
Market: distributor catalogue cycles are slowGet samples to product managers in Q1 for next year's catalogue; sell direct to early-adopter teachers meanwhile
Regulatory: Li-ion in a school device — transport, battery regulation, charging box safetyUN 38.3 cell, removable cell for 2027 rules, class box with a certified multi-port USB supply
Supply: 2.8" LCD panels change oftenTwo panels on one connector; buy a year ahead for the class sets
Licence: four OSHWHub designsRead each licence; they are references — your own schematic, your own firmware
4 · Start kit · boards, BOM, build plan, certification

Start kit

Boards to start from

BoardLinkWhat it contributesFiles (catalogue)Licence note
MINI handheld oscilloscope, ultra-mini version (OSHWHub)gongbans.com/db/oshwhub-mini-shou-chi-shi-bo-qi5-0.htmlOpen ultra-mini handheld scope — the form factor and front-end starting pointschematic, pcbOSHWHub — licence varies; read it
Simple oscilloscope, training-camp project (OSHWHub)gongbans.com/db/oshwhub-simple-oscilloscope.htmlOpen simple scope — the entry/educational variantschematic, pcbOSHWHub — check licence
Portable oscilloscope + STM32H750 core board re-engraving (OSHWHub)gongbans.com/db/oshwhub-training-camp-portable-oscilloscope-re-engraving.htmlOpen portable scope with an STM32H750 core (two boards: core + scope expansion) — the vocational "pro" variantschematic, pcbOSHWHub — check licence
5½-digit voltmeter (OSHWHub)gongbans.com/db/oshwhub-wu-wei-ban-dian-ya-biao.htmlOpen precision voltmeter — informs the meter mode (the school unit uses a simpler path)schematic, pcbOSHWHub — check licence

Block diagram

[Banana CH1] [Banana CH2] -> [protection: series R + clamps to ±30 V, ESD] -> [attenuator + op-amp front-end] -> [MCU ADC ~1 MSa/s]
[Banana GEN out] <- [DAC/PWM generator: sine/square/triangle to 20 kHz]                 |
                                                   [MCU (STM32H7/G4-class or ESP32-S3 without radio)] 
                                                      |            |            |
                                           [2.8" LCD + 5 buttons]  [USB-C: charge + CSV mass storage]  [Li-ion 1S + charger + gauge]
[Class box: 16 USB-C ports from a certified supply + a small hub MCU that merges 16 CSVs into one sheet]

Engineering gap: the protection front-end that survives abuse, the experiment-mode UI and lessons, the CSV/class-box merge, a case that survives being dropped by teenagers, and class-set logistics. The scope core exists.

Starter BOM (estimates per unit at 1k)

PartEst. costNotes
MCU with fast ADC (STM32G4/H7-class)€3.00Second-source: ESP32-S3 variant without radio enabled would drag RED in — avoid
Analogue front-end (op-amps, attenuator, clamps, series R)€3.00Protection parts must be rated; test to ±60 V surge
2.8" LCD 320×240€4.50Two panels on one connector
Li-ion 1,000 mAh + charger + gauge€3.00UN 38.3; removable for 2027
4 mm shrouded banana jacks ×6€2.00Multi-source
PCB + passives + USB-C€3.50
ABS case + rubber bumper + lanyard€3.80Tooling €9–12k
Lead sets (2× 4 mm to crocodile)€1.50Consumable; sell spares
Class box (per 16): case, certified 16-port USB supply, hub MCU€40.00Sold inside the set

Firmware/software starting point

  • The OSHWHub projects publish firmware on their pages — read for ADC/DMA and display handling; the JYE Tech DSO138 open design (exists) is another documented reference for a minimal scope.
  • Your own: experiment mode (state machine + diagrams), auto-set, RMS meter, generator, USB mass-storage CSV (TinyUSB exists), and the class-box merge.
  • Lessons: write with the teacher-author; map to the national curriculum per country (DE Bundesländer differ — pick 2 to start).

12-week build plan

WeeksPhaseExit criteria
1–2Validate16 units from the open mini-scope design + a protection board, 4 experiment worksheets; 10 physics teachers run one lesson; pass if ≥ 10 order a class set at €69/unit (runs to W8)
3–5Works-likeOwn front-end: survives ±60 V for 1 minute and a 230 V touch for 1 s without damage (then a lab confirms); experiment mode v0; CSV export; auto-set
6–8Looks-like + EVTCase T1 + bumper, class box v1; 100 units (6 sets); 3 classrooms run 2 lessons each; EMC pre-scan
9–10DVT + pre-complianceEMC/LVD pre-compliance; EN 61010 input-safety review of wording and protection; UN 38.3 report; drop test 1 m × 6 faces; teacher guide v1
11–12Pilot batch30 sets (480 units) to trial schools + distributor samples; ≥ 80% of students complete the RC-charging lesson; ≤ 2% field failures

Certification checklist (EU)

  • CE under EMC + LVD (no radio): EN IEC 61000-6-1/-3; EN IEC 61010-1 is the measuring-equipment safety standard — a battery device with ≤ 30 V inputs falls below most hazardous-voltage clauses, but use its wording for input ratings (CAT none, "not for mains") and get a lab to review the protection; EN IEC 62368-1 for the charging box. Est. €5–8k EMC, €3–5k safety review, €2–3k charging box.
  • No radio → no RED, no EN 18031. Keep it so; export is USB.
  • Battery: UN 38.3 for the cell, EU Battery Regulation labelling, removability by 18 Feb 2027 — removable cell behind a screw door.
  • RoHS, REACH, WEEE, packaging registration.
  • CRA: non-connected product with digital elements — low exposure; USB firmware update, vulnerability contact, reporting from 11 Sept 2026, full 11 Dec 2027.
  • GDPR: CSVs may contain student names if teachers type them — default to bench numbers. Toy directive: not a toy — "educational equipment, 12+ under supervision"; stay out of toy channels.
  • Total certification budget estimate: €10–16k.

Validation toolkit

  • Kill question: Do 10 physics teachers order a 16-unit class set at €69 each after a one-lesson trial?
  • Cheapest experiment (~€1,500): 16 open-design mini scopes + protection boards in printed cases, 4 worksheets, a loan box; lend to 10 teachers for one lesson each; order form at €999 per set, delivery next term.
  • 5-question interview (physics teacher): 1) What do you use today to show a waveform, and how many benches get to use it? 2) What's the one experiment you skip because the equipment is a hassle? 3) How much can you spend without asking anyone, and how much with the head's signature? 4) What breaks in your lab, and who fixes it? 5) €999 for 16 units with lessons and a charging box — would you order for next term?
  • Landing page: headline "A scope every bench can use in 3 minutes." Bullets: "Protected ±30 V banana inputs, scope + meter + generator, experiment mode with the curve students should see." / "USB export; the class box merges 16 units into one spreadsheet." / "€999 per class set of 16 with charging box and 12 lessons."
  • Pass threshold: 10 class-set orders from 10 trials, or 25 sets reserved by teachers in 8 weeks.

First production checklist

  • Samples: 5 golden samples with gain/offset calibration records and a protection-test certificate.
  • DFM: banana-jack retention, bumper fit, battery door screws, LCD bonding, drop-test survival, lead-set strain relief.
  • MOQ talk: LCDs 1k–2k (two panels), MCUs reel, jacks 10k, cells 1k with UN 38.3, cases 1k, class boxes 100.
  • QC: AQL II 2.5/4.0; 100% calibration + input-protection pulse test; 100% charge test; 1% drop test.
  • Packaging: UN 3481 marking; class-set box with labelled unit slots (1–16) and spares.
  • Incoterms: FOB Shenzhen; air for samples; sea for the term batch — order 6 months before September.
5 · Who to contact · from gongban.db

Who to contact

No verified company contact on file yet for this idea. Every board it is built from is a community design on OSHWHub, where the author is an individual, not a supplier. Nothing has been invented to fill the gap: once section 2 (validate demand) has passed, use the manufacturing houses and the directory entries below, follow the zero-experience founder playbook, and treat the first quote you get as the real data. Company websites only; no personal contacts are published.

Open-hardware boards without a company behind them

Manufacturing (PCBA / EMS) on file

  • Kingbrother / King Brother Technology · global.kingbrother.com/ — PCB fab + EMS; see the Kingbrother SOM page on this site.
  • Foxlink (SZ) (正崴精密工业(深圳)有限公司) · foxconn.com — PCBA + cable assembly EMS: Cable assembly; PCBA; connector; OEM for major electronics brands.

MOQ and landed cost

gongban.db holds no MOQ, unit-price or tariff data for these companies, so none is shown. Get the numbers from the quote (the e-mail below asks for them) and run them through the landed-cost worksheet in the playbook. The starter BOM in the start kit section is an estimate, not a quote.

Outreach e-mail, ready to send

Fill in the [brackets], keep it short, and send it to the sales or "contact us" address on the company's own website. The Chinese version is the same letter; sending both in one mail is normal. How to read the reply: playbook → the first quote.

B. To a PCBA / EMS house — quote from the open design files (send to Kingbrother, Foxlink or any assembler you vet; see the playbook)

B. 中文版

6 · Next steps · this week

Next steps (this week)

  1. Fab the mini handheld open design and the simple scope, add a protection breadboard; show an RC-charging curve on one by day 10.
  2. Write 4 one-page worksheets (RC charging, AC vs DC, sound, rectifier) with a physics teacher; print them.
  3. Contact your national physics-teacher association for the next conference date and email 20 teachers a one-lesson trial offer.
Get this built

Want this built?

Get sourcing and manufacturing help from a team in Shenzhen and Europe.

Never built hardware? Start with the zero-experience founder playbook: samples, the first quote, CE/FCC, customs, logistics and the kill question, in order. Board facts come from the catalogue; everything else in this pack is an estimate.

Get this built →

Start pack school-scope · written by the GONGBANS inventor from the public catalogue and public sources. Concept generated by the GONGBANS inventor from the public catalogue, then expanded into a start pack. Not a product, not validated; every number (market, BOM, price, effort, certification cost) is a rough estimate to be checked, not a quote. Check each board's licence before commercial use. Not legal, tax or investment advice. Idea page · Download as Markdown · All 50 start packs →