# School Scope — Founder Start Pack

> A €59 pocket oscilloscope + voltmeter kit designed for physics classrooms: safe banana inputs, pre-loaded experiments and a teacher dashboard instead of a 200-page manual.

Concept from the GONGBANS inventor. Not validated. All numbers are estimates — check them. Check every board's licence before commercial use.

## 1. Summary

- **Problem:** Schools replace their dying analogue scopes with €30 pocket scopes that students can't operate and teachers can't teach with, or with €400+ bench scopes they can't afford sixteen of. Nobody designs a measurement tool for a 15-year-old and a 45-minute lesson.
- **Customer:** Secondary-school physics departments and vocational schools in DE/NL/UK/Nordics; education-supply distributors as the channel. The school (or the department head with a budget) pays; teachers and students use it.
- **Product:** A €59–69 handheld with ±30 V protected banana inputs (no mains, ever), scope + voltmeter + signal generator, an "experiment mode" that walks the class through RC charging, AC vs DC, sound waves, diode rectification, with USB export to the class spreadsheet; sold as 16-unit class sets with a charging box.
- **Why now:** Four open scope/voltmeter designs with schematics and PCB exist in the catalogue, including a small handheld and an STM32H750-class portable; pocket scopes have proven the price point (FNIRSI DSO152 at ~€27–37, [eleshop](https://eleshop.eu/fnirsi-dso152-oscilloscope.html), [aio.lv](https://aio.lv/en/product--fnirsi-dso152--11618311.md)) but not the classroom; curricula push measurement and data literacy.
- **The ask:** ~€90k (estimate) to the first 1,000 units; route = teacher trials → class-set pre-orders + bootstrap; education distributors for scale.

<!-- market-check:start -->
> **External market check (November 2026): LIKELY.** Classroom pocket-oscilloscope kits exist (Velleman / Whadda WSEDU06 at about £19–38, ConsuLab uScope classroom sets), confirming a real buyer and category; the cheap options get mixed-to-poor reviews, while deeper alternatives (PicoScope) are bench instruments, not pocket kits, so a quality gap in the middle is plausible. **Main risk:** Needs to justify a two-to-three-times price premium over Whadda on quality and curriculum grounds. *As researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast. Competitors and sources found: see [the market check in the competition table](#external-market-check).*
<!-- market-check:end -->

## 2. Validate demand first

<!-- validate-demand:start -->
**Do this before anything else in this pack: before the business plan, before you order a sample board, and long before you e-mail a factory (section 5).** The classic first-time mistake is to source and build first and find out later that nobody wanted it. Hardware mistakes are slow and expensive to undo; 15–20 conversations are cheap.

### The gate: this idea's kill question

> Do 10 physics teachers order a 16-unit class set at €69 each after a one-lesson trial?

You pass this section when you can answer that question with evidence you collected yourself, not a guess: a measured conversion on a fake-door landing page for the consumer side and, for the business side, at least three decision-makers who put something on paper: a letter of intent, a paid pilot or a purchase order. Until then: no factory e-mail, no sample order, no firmware, no logo. If the answer is no, you have lost a few weeks and saved the rest.

### Who you are looking for

**The audience named in the idea:** Secondary-school physics departments and vocational schools in DE/NL/UK/Nordics; educational distributors.

**The problem as the pack states it:** Schools replace their dying analogue scopes with €30 pocket scopes that students can't operate and teachers can't teach with, or with €400+ bench scopes they can't afford sixteen of. Nobody designs a measurement tool for a 15-year-old and a 45-minute lesson.

Talk to the people who have the problem *and* the people who pay; in B2B they are often not the same person, and the one who pays decides.

### Where to find them

Communities and associations where this audience actually talks, as far as we know them in November 2026. Confirm each is still active and read its rules on self-promotion before posting; most allow a genuine question about a problem and ban a pitch.

- **r/ScienceTeachers** · https://www.reddit.com/r/ScienceTeachers/ — secondary-school science teachers.
- **AAPT** · https://www.aapt.org/ — American Association of Physics Teachers.
- **IOP, Institute of Physics (UK)** · https://www.iop.org/ — UK physics teacher network and conferences.
- **MNU (DE)** · https://www.mnu.de/ — German association of maths and science teachers; regional conferences.
- **Tes Community (UK)** · https://community.tes.com/ — UK teachers' forum.

Beyond the named ones, the same four methods work for every idea on this site:

- **Search for communities around the problem, not the product:** forums, Facebook groups, Discord servers and newsletters in your own country for the terms in the audience line above. Many of the best groups are national and in the local language; a Dutch or German group beats a global English one for an EU launch.
- **Trade associations and their regional meetings** for the B2B audiences: one meeting puts twenty buyers in a room, and the association newsletter will often run a short survey for a member.
- **LinkedIn:** search people by the job titles in the audience line, message ten a day with one question (not a pitch), and ask for twenty minutes. Expect one in five to say yes.
- **Your deposit list from the kill question** and anyone who replied to the fake door: those are the first interviews, not the last.

### The plan: 15–20 conversations, then a fake door

1. **15–20 real conversations** (ten buyers from the business side and ten from the consumer side), fifteen minutes each, using the script below. Before writing a line of code or ordering a board. Write up each one the same day: the problem in their words, what they do today, what it costs them, what they said when you named the price.
2. **A fake door.** One page: the pitch as the headline, a rendered image or a photo of a cardboard mock-up, the price (€59–89, the pack's estimate), and one button. Two buttons: a refundable deposit or waitlist for consumers, "request a pilot" for businesses.
3. **Send it** to everyone you interviewed and post it, with the problem question first, in the communities above. Run it for two to four weeks.
4. **Count** against the kill question. Then decide: go, change the idea, or stop.

### Interview script (fifteen minutes, problem first)

Ask, then be quiet. Do not describe the product until question 5; if you pitch first you will only hear politeness.

```email
Thanks for the time. I am looking into how secondary-school physics departments and vocational schools in DE/NL/UK/Nordics deal with [the problem in their words]; I have not built anything yet and I am trying to find out whether it is worth building.

1. What do your students use to look at a signal today, how many of those do you have working, and who repairs them?
2. What do you do about it today, and what does that cost you in money or time per month?
3. What have you already tried or bought, and why did you stop using it?
4. If this went away tomorrow, what would change for you? (If the answer is "not much", you have your answer.)
5. [Only now describe it in one sentence:] A €59 pocket oscilloscope + voltmeter kit designed for physics classrooms: safe banana inputs, pre-loaded experiments and a teacher dashboard instead of a 200-page manual. On a scale of one to ten, how likely would you be to buy that at €59–89, and what would make it a ten?
6. Who else should I talk to about this? (Ask for two names.)

Close: "If I build this, can I come back to you with a prototype?" A yes with a calendar date is worth more than any compliment.
```

### Pre-order / pilot message (forum post or direct message)

```email
Subject: School Scope: would you pay €59–89 for this? Looking for 20 people to tell me I am wrong

I am [your name], [your background]. I am considering building a School Scope: A €59 pocket oscilloscope + voltmeter kit designed for physics classrooms: safe banana inputs, pre-loaded experiments and a teacher dashboard instead of a 200-page manual. Before I order a single part I want to know whether this is a real problem for people like you or only in my head.

If you would want one at €59–89, the page at [link] takes a fully refundable €[10–20] deposit (or a waitlist e-mail if you prefer); if twenty people do that, I build it, if not, everyone gets their money back and I have learned something.

Either way, two questions: how do you deal with this today, and what would make you say no? Honest answers are worth more to me than deposits.
```

### Reading the signal

| Real signal | False positive |
|---|---|
| A refundable deposit, a signed LOI, a paid pilot, a calendar invite for the prototype | "Sounds cool", "I would totally buy that", likes and upvotes |
| They describe the problem unprompted and in detail, with numbers | They agree with your description of the problem |
| They have already paid for a workaround (a product, a service, their own time) | They have never tried anything and are not bothered |
| Landing-page conversion to deposit or form above the pack's pass mark, from cold traffic | Conversion from friends, family and your own network |
| A named budget and a named decision-maker (B2B) | An enthusiastic user who cannot buy |

### Go / no-go

- **Go to section 3 (business plan) and section 4 (start kit)** when the kill question above is met by your own numbers, you have 15–20 written-up conversations, and at least one real signal from the left column per segment you plan to sell to. Only then does section 5 (Who to contact) apply.
- **Change the idea** when the problem is real but the price, the buyer or the form factor in the pitch is wrong: the interviews will tell you which. Rewrite the pitch and run the fake door again; this is normal and costs a week.
- **Stop** when the kill question fails on honest numbers, or when nobody you talked to has paid for a workaround. Pick another idea on this site; the boards in the start kit are not wasted, only unused.

The full worksheet, with how to define the segment and run the fake door, is in the [playbook → validate demand](/playbook.html#validate).
<!-- validate-demand:end -->

## 3. Business plan

### Problem & customer
The physics teacher has 16 benches, one lesson, 30 students and a cupboard of scopes from 1990. They need every bench to see a waveform in 3 minutes, students to record a value without breaking anything, and a worksheet that matches the device. The department head signs for €1,000–1,500 a year; a class set has to fit that. The distributor needs a catalogue SKU with CE, a spare-parts line, and a 3-year warranty.

Who pays vs who uses: the school pays via the distributor; teachers prepare, students use. The vocational school (electrical trades) is the second buyer with slightly higher specs.

### Market size (estimates)
- EU + UK: ~60k secondary schools and ~15k vocational schools (estimate); say 70% teach physics/electronics with a lab → ~52k schools; one class set each → **52k class sets × 16 = 830k units**. Replacement every ~8 years.
- **TAM:** 830k × €64 ≈ **€53 M** (+ class-set boxes, probes).
- **SAM:** schools in DE/NL/UK/Nordics served by the distributors we can reach — ~35% → **€18 M**.
- **SOM (3 years):** 3% of SAM → ~9,000 units (560 class sets) → **€580k** + accessories.

### Competition
| Alternative | Notes | Weakness we attack |
|---|---|---|
| Pocket scopes (FNIRSI DSO152-class, €27–37; 200 kHz single-channel per [atomic14](https://www.atomic14.com/bench/scopes/fnirsi-dso152/)) | Cheap, surprisingly OK | Unprotected inputs, cryptic UI, no curriculum, no class-set logistics, no export |
| Entry bench scopes (€300–500) | Real instruments | 16 of them = €6k; mains-powered; 200-page manual |
| PC/USB scopes for education (PicoScope-class) | Good software | Needs a PC per bench; price per seat |
| Phone apps + audio jack / "do nothing" with multimeters | Free | Can't show a waveform safely; no AC measurement for most |
| Datalogger ecosystems from education suppliers (sensor + interface) | Curriculum-aligned | €200–400 per bench; closed; slow |
| DIY (DSO138 kits etc.) | Teachers build them with students | Unprotected, fragile, no export |

**Wedge:** curriculum-first UI, protected banana inputs, class-set hardware (charging box, labelled units, spares), USB export to a spreadsheet, at pocket-scope money.

<!-- market-competitors:start -->
#### External market check

Competitors, demand signals and price comparables found by web search in November 2026. Sources are named as found and not linked; as researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast.

| Who / source | What it is | What it tells us |
|---|---|---|
| Whadda WSEDU06 (Rapid Online) | About £19–38 pocket scope kit | Cheap incumbent, mixed reviews |
| ConsuLab uScope classroom kit | Classroom set | Incumbent in the education channel |
| PicoScope Education Kit | Bench instrument for schools | Upper tier, different form factor |

**Verdict as researched: LIKELY.** Main risk: Needs to justify a two-to-three-times price premium over Whadda on quality and curriculum grounds.
<!-- market-competitors:end -->

### Product & value proposition
Hardware: 2.8" colour LCD, 2 analogue channels (one is enough for most lessons; two for phase/rectifier lessons), ~1 MSa/s class (audio to a few hundred kHz is all a school needs — say it), 4 mm shrouded banana inputs with ±30 V clamping and a fuse-less protection network, built-in signal generator (sine/square/triangle to 20 kHz) on a third banana pair, voltmeter mode (DC/AC RMS, 3.5 digits — the "5½-digit" open design informs the precision path but the school unit doesn't need it), Li-ion with USB-C, rubber bumper, lanyard. Software: Scope / Meter / Generator / Experiment modes; experiment mode shows a diagram, the expected curve, and a "record" button that writes a CSV; teacher dashboard = a USB "class box" that collects CSVs from 16 units and merges them into one sheet. Class set: 16 units, charging box, 16 lead sets, spares, teacher guide with 12 lessons.

Pricing (estimates): **€69 single**, **class set of 16 at €999** (≈ €62/unit) with charging box, vocational variant €89 (higher bandwidth, 2 ch, probe clips). Distributors at 35–40% off.

### Unit economics (estimates per unit, ex-VAT)
| Item | 1k units | 5k units |
|---|---|---|
| Electronics BOM (MCU with ADC €2.5, analogue front-end + protection €3, 2.8" LCD €4.5, Li-ion + charger €3, banana jacks €2, PCB + passives €4) | €19.00 | €15.00 |
| Assembly & test (SMT, gain/offset calibration, protection test) | €3.50 | €2.40 |
| Enclosure (ABS + rubber bumper; tooling amortised) | €3.80 | €2.40 |
| Packaging (box, 2 lead sets, quick card; class-set box separate) | €2.20 | €1.60 |
| Freight + duty to EU (Li-ion) | €2.00 | €1.30 |
| Certification amortised (~€16k: EMC/LVD, EN 61010 input wording, UN 38.3, RoHS) | €16.00 | €3.20 |
| **Landed cost** | **€46.50** | **€25.90** |
| Sell price (direct €69 / distributor €42) | €69 | €42 |
| **Gross margin** | **€22.50 (33%)** | **€16.10 (38% at distributor)** |

Honest: at 1k units this is thin. The class-set box (~€40 BOM, sold at €150 inside the set), lead sets, the vocational variant, and 5k+ volumes make it work. Don't launch below €69 single / €999 set.

### Go-to-market
**First 100 customers:** 10 physics teachers who trial a 16-unit set for one lesson and then order (kill question) — found via physics-teacher associations and their conferences, teacher forums and social groups, university teacher-training departments; 2 education-supply distributors' product managers early (they tell you the price and the catalogue deadline); a lesson video shot in a real classroom.

**Scale channels:** education-supply distributors (the catalogues schools order from — their deadlines are 6–9 months before print), teacher-association conferences, vocational-school equipment suppliers, textbook publishers (worksheet bundles), national STEM programmes and grants.

### 12-month plan
| Quarter | Milestones |
|---|---|
| Q1 | Works-like from the mini handheld open design + protection front-end; experiment mode v0 (4 lessons); 10 teacher trials → class-set orders. |
| Q2 | Own PCB, tooled case, class box; EVT 100 (6 class sets); teacher guide v1 (12 lessons); pre-compliance; distributor samples. |
| Q3 | DVT, certification, 500-unit pilot (30 sets) for the autumn term; distributor listing for next catalogue. |
| Q4 | 1,000+ units; vocational variant EVT; second country's curriculum mapping. |

**Team:** 1 embedded/analogue engineer (front-end, protection, firmware — full-time), 1 UI/educational-software developer (experiment mode, class box merge — part-time → full-time), a physics teacher-author on contract for the lessons, founder for distributors and teacher community. Three people.

**Funding to first 1,000 units (estimates):** NRE €42k (PCB €8k, case + class box tooling €16k, firmware/UI €12k, lesson content €6k) + certification €16k + 1,000 units landed ~€47k + 9 months overhead €55k ≈ **€160k**; minus class-set pre-orders (10 × €999 ≈ €10k), pilot sales (30 sets ≈ €28k) and a distributor's first order prepayment (~€30k) ≈ **~€90k**. Bootstrap + pre-orders; STEM-education grants exist in most countries and fit the lesson-content part.

### Top risks
| Risk | Mitigation |
|---|---|
| **Safety:** a student connects it to mains | ±30 V clamping + series protection on every input; shrouded 4 mm jacks; no mains probes supplied; big "no mains" label; EN 61010 wording; the teacher guide forbids it |
| **Technical:** cheap ADC = noisy traces that confuse students | Oversampling, auto-set, averaging on by default; it's a teaching tool, not a 100 MHz scope — set expectations |
| **Market:** thin margin at low volume | Class-set pricing, accessories, vocational variant; don't do single-unit retail below €69 |
| **Market:** distributor catalogue cycles are slow | Get samples to product managers in Q1 for next year's catalogue; sell direct to early-adopter teachers meanwhile |
| **Regulatory:** Li-ion in a school device — transport, battery regulation, charging box safety | UN 38.3 cell, removable cell for 2027 rules, class box with a certified multi-port USB supply |
| **Supply:** 2.8" LCD panels change often | Two panels on one connector; buy a year ahead for the class sets |
| **Licence:** four OSHWHub designs | Read each licence; they are references — your own schematic, your own firmware |

## 4. Start kit

### Boards to start from
| Board | Link | What it contributes | Files (catalogue) | Licence note |
|---|---|---|---|---|
| MINI handheld oscilloscope, ultra-mini version (OSHWHub) | https://www.gongbans.com/db/oshwhub-mini-shou-chi-shi-bo-qi5-0.html | Open ultra-mini handheld scope — the form factor and front-end starting point | schematic, pcb | **OSHWHub — licence varies; read it** |
| Simple oscilloscope, training-camp project (OSHWHub) | https://www.gongbans.com/db/oshwhub-simple-oscilloscope.html | Open simple scope — the entry/educational variant | schematic, pcb | OSHWHub — check licence |
| Portable oscilloscope + STM32H750 core board re-engraving (OSHWHub) | https://www.gongbans.com/db/oshwhub-training-camp-portable-oscilloscope-re-engraving.html | Open portable scope with an STM32H750 core (two boards: core + scope expansion) — the vocational "pro" variant | schematic, pcb | OSHWHub — check licence |
| 5½-digit voltmeter (OSHWHub) | https://www.gongbans.com/db/oshwhub-wu-wei-ban-dian-ya-biao.html | Open precision voltmeter — informs the meter mode (the school unit uses a simpler path) | schematic, pcb | OSHWHub — check licence |

### Block diagram
```
[Banana CH1] [Banana CH2] -> [protection: series R + clamps to ±30 V, ESD] -> [attenuator + op-amp front-end] -> [MCU ADC ~1 MSa/s]
[Banana GEN out] <- [DAC/PWM generator: sine/square/triangle to 20 kHz]                 |
                                                   [MCU (STM32H7/G4-class or ESP32-S3 without radio)] 
                                                      |            |            |
                                           [2.8" LCD + 5 buttons]  [USB-C: charge + CSV mass storage]  [Li-ion 1S + charger + gauge]
[Class box: 16 USB-C ports from a certified supply + a small hub MCU that merges 16 CSVs into one sheet]
```
**Engineering gap:** the protection front-end that survives abuse, the experiment-mode UI and lessons, the CSV/class-box merge, a case that survives being dropped by teenagers, and class-set logistics. The scope core exists.

### Starter BOM (estimates per unit at 1k)
| Part | Est. cost | Notes |
|---|---|---|
| MCU with fast ADC (STM32G4/H7-class) | €3.00 | Second-source: ESP32-S3 variant without radio enabled would drag RED in — avoid |
| Analogue front-end (op-amps, attenuator, clamps, series R) | €3.00 | Protection parts must be rated; test to ±60 V surge |
| 2.8" LCD 320×240 | €4.50 | **Two panels on one connector** |
| Li-ion 1,000 mAh + charger + gauge | €3.00 | UN 38.3; removable for 2027 |
| 4 mm shrouded banana jacks ×6 | €2.00 | Multi-source |
| PCB + passives + USB-C | €3.50 | |
| ABS case + rubber bumper + lanyard | €3.80 | **Tooling €9–12k** |
| Lead sets (2× 4 mm to crocodile) | €1.50 | Consumable; sell spares |
| Class box (per 16): case, certified 16-port USB supply, hub MCU | €40.00 | Sold inside the set |

### Firmware/software starting point
- The OSHWHub projects publish firmware on their pages — read for ADC/DMA and display handling; the JYE Tech DSO138 open design (exists) is another documented reference for a minimal scope.
- Your own: experiment mode (state machine + diagrams), auto-set, RMS meter, generator, USB mass-storage CSV (TinyUSB exists), and the class-box merge.
- Lessons: write with the teacher-author; map to the national curriculum per country (DE Bundesländer differ — pick 2 to start).

### 12-week build plan
| Weeks | Phase | Exit criteria |
|---|---|---|
| 1–2 | Validate | 16 units from the open mini-scope design + a protection board, 4 experiment worksheets; **10 physics teachers run one lesson; pass if ≥ 10 order a class set at €69/unit** (runs to W8) |
| 3–5 | Works-like | Own front-end: survives ±60 V for 1 minute and a 230 V touch for 1 s without damage (then a lab confirms); experiment mode v0; CSV export; auto-set |
| 6–8 | Looks-like + EVT | Case T1 + bumper, class box v1; 100 units (6 sets); 3 classrooms run 2 lessons each; EMC pre-scan |
| 9–10 | DVT + pre-compliance | EMC/LVD pre-compliance; EN 61010 input-safety review of wording and protection; UN 38.3 report; drop test 1 m × 6 faces; teacher guide v1 |
| 11–12 | Pilot batch | 30 sets (480 units) to trial schools + distributor samples; ≥ 80% of students complete the RC-charging lesson; ≤ 2% field failures |

### Certification checklist (EU)
- **CE under EMC + LVD** (no radio): EN IEC 61000-6-1/-3; **EN IEC 61010-1** is the measuring-equipment safety standard — a battery device with ≤ 30 V inputs falls below most hazardous-voltage clauses, but use its wording for input ratings (CAT none, "not for mains") and get a lab to review the protection; **EN IEC 62368-1** for the charging box. Est. €5–8k EMC, €3–5k safety review, €2–3k charging box.
- **No radio** → no RED, no EN 18031. Keep it so; export is USB.
- **Battery:** UN 38.3 for the cell, **EU Battery Regulation** labelling, removability by 18 Feb 2027 — removable cell behind a screw door.
- **RoHS, REACH, WEEE**, packaging registration.
- **CRA:** non-connected product with digital elements — low exposure; USB firmware update, vulnerability contact, reporting from 11 Sept 2026, full 11 Dec 2027.
- **GDPR:** CSVs may contain student names if teachers type them — default to bench numbers. **Toy directive:** not a toy — "educational equipment, 12+ under supervision"; stay out of toy channels.
- **Total certification budget estimate: €10–16k.**

### Validation toolkit
- **Kill question:** Do 10 physics teachers order a 16-unit class set at €69 each after a one-lesson trial?
- **Cheapest experiment (~€1,500):** 16 open-design mini scopes + protection boards in printed cases, 4 worksheets, a loan box; lend to 10 teachers for one lesson each; order form at €999 per set, delivery next term.
- **5-question interview (physics teacher):** 1) What do you use today to show a waveform, and how many benches get to use it? 2) What's the one experiment you skip because the equipment is a hassle? 3) How much can you spend without asking anyone, and how much with the head's signature? 4) What breaks in your lab, and who fixes it? 5) €999 for 16 units with lessons and a charging box — would you order for next term?
- **Landing page:** headline "A scope every bench can use in 3 minutes." Bullets: "Protected ±30 V banana inputs, scope + meter + generator, experiment mode with the curve students should see." / "USB export; the class box merges 16 units into one spreadsheet." / "€999 per class set of 16 with charging box and 12 lessons."
- **Pass threshold:** 10 class-set orders from 10 trials, or 25 sets reserved by teachers in 8 weeks.

### First production checklist
- Samples: 5 golden samples with gain/offset calibration records and a protection-test certificate.
- DFM: banana-jack retention, bumper fit, battery door screws, LCD bonding, drop-test survival, lead-set strain relief.
- MOQ talk: LCDs 1k–2k (two panels), MCUs reel, jacks 10k, cells 1k with UN 38.3, cases 1k, class boxes 100.
- QC: AQL II 2.5/4.0; 100% calibration + input-protection pulse test; 100% charge test; 1% drop test.
- Packaging: UN 3481 marking; class-set box with labelled unit slots (1–16) and spares.
- Incoterms: FOB Shenzhen; air for samples; sea for the term batch — order 6 months before September.

## 5. Who to contact

<!-- who-to-contact:start -->
**No verified company contact on file yet for this idea.** Every board it is built from is a community design on OSHWHub, where the author is an individual, not a supplier. Nothing has been invented to fill the gap: once section 2 (validate demand) has passed, use the manufacturing houses and the directory entries below, follow the [zero-experience founder playbook](/playbook.html), and treat the first quote you get as the real data. Company websites only; no personal contacts are published.

### Open-hardware boards without a company behind them

- **OSHWHub community designs** — community projects on OSHWHub 立创开源硬件平台 (JLC open hardware platform) · https://oshwhub.com . The author is an individual, not a supplier, and author handles are not published here. Fabricate from the files through a PCBA house (below) and check each project's licence first. Boards used here: [MINI手持示波器 超MINI版](/db/oshwhub-mini-shou-chi-shi-bo-qi5-0.html) (open ultra-mini handheld oscilloscope); [#训练营#简易示波器](/db/oshwhub-simple-oscilloscope.html) (open simple oscilloscope design for the entry variant); [仪器训练营便携示波器及H750核心板复刻](/db/oshwhub-training-camp-portable-oscilloscope-re-engraving.html) (open portable scope with STM32H750 core for the pro variant); [五位半电压表](/db/oshwhub-wu-wei-ban-dian-ya-biao.html) (open 5½-digit voltmeter for the precision mode).

### Manufacturing (PCBA / EMS) on file

- **Kingbrother / King Brother Technology** · https://global.kingbrother.com/ — PCB fab + EMS; see the [Kingbrother SOM page](/boards-kingbrother.html) on this site.
- **Foxlink (SZ)** (正崴精密工业(深圳)有限公司) · foxconn.com — PCBA + cable assembly EMS: Cable assembly; PCBA; connector; OEM for major electronics brands.

### MOQ and landed cost

gongban.db holds no MOQ, unit-price or tariff data for these companies, so none is shown. Get the numbers from the quote (the e-mail below asks for them) and run them through the [landed-cost worksheet in the playbook](/playbook.html#landed-cost). The starter BOM in the start kit section is an estimate, not a quote.

### Outreach e-mail, ready to send

Fill in the [brackets], keep it short, and send it to the sales or "contact us" address on the company's own website. The Chinese version is the same letter; sending both in one mail is normal. How to read the reply: [playbook → the first quote](/playbook.html#quote).

**B. To a PCBA / EMS house — quote from the open design files** (send to Kingbrother, Foxlink or any assembler you vet; see the [playbook](/playbook.html#manufacturer))

```email
Subject: PCBA quote from open design files — School Scope, [50] prototypes + [500] production units

Hello [company] sales team,

I am [your name], founder of [your company] in [country]. We are building a School Scope: A €59 pocket oscilloscope + voltmeter kit designed for physics classrooms: safe banana inputs, pre-loaded experiments and a teacher dashboard instead of a 200-page manual. The design starts from published open-hardware files (MINI手持示波器 超MINI版, #训练营#简易示波器, 仪器训练营便携示波器及H750核心板复刻, 五位半电压表; schematic, PCB and BOM available) with our own modifications.

Could you quote:
1. PCB fabrication + SMT assembly for [50] prototype units and [500 / 1,000] production units, including component sourcing (we provide the BOM with manufacturer part numbers).
2. NRE, stencil and test-fixture costs, and your DFM review fee if any.
3. Lead time from file approval to shipment, and your QC / functional-test process.
4. Box build (enclosure, cable, packaging) if you offer it.
5. Terms: EXW / FOB Shenzhen or DDP [your city]; payment terms for a first order.

Design files: [link to Gerber, BOM and pick-and-place files].

Best regards,
[your name] · [your company] · [website] · [phone / WhatsApp]
```

**B. 中文版**

```email
主题：基于开源设计文件的PCBA报价 — School Scope，[50]台样机 + [500]台量产

[公司]销售团队，您好：

我是[姓名]，[国家][公司]的创始人。我们正在开发一款School Scope：A €59 pocket oscilloscope + voltmeter kit designed for physics classrooms: safe banana inputs, pre-loaded experiments and a teacher dashboard instead of a 200-page manual。设计基于已公开的开源硬件文件（MINI手持示波器 超MINI版, #训练营#简易示波器, 仪器训练营便携示波器及H750核心板复刻, 五位半电压表；含原理图、PCB和BOM），并做了我们自己的修改。

请报价：
1. [50]台样机和[500 / 1,000]台量产的PCB制板+SMT贴片，含元器件采购（我们提供带厂商料号的BOM）。
2. NRE、钢网和测试治具费用，以及DFM评审费用（如有）。
3. 从文件确认到出货的交期，以及贵司的QC/功能测试流程。
4. 如可提供，整机组装（外壳、线材、包装）报价。
5. 贸易条款：深圳EXW/FOB或DDP到[城市]；首单付款条件。

设计文件：[Gerber、BOM和坐标文件链接]。

祝好，
[姓名] · [公司] · [网站] · [电话 / WhatsApp]
```
<!-- who-to-contact:end -->

## 6. Next steps (this week)
1. Fab the mini handheld open design and the simple scope, add a protection breadboard; show an RC-charging curve on one by day 10.
2. Write 4 one-page worksheets (RC charging, AC vs DC, sound, rectifier) with a physics teacher; print them.
3. Contact your national physics-teacher association for the next conference date and email 20 teachers a one-lesson trial offer.

Want help sourcing or building this? Talk to us via www.gongbans.com.
