Concept, not a product. Concept generated by the GONGBANS inventor from the public catalogue, then expanded into a start pack. Not a product, not validated; every number (market, BOM, price, effort, certification cost) is a rough estimate to be checked, not a quote. Check each board's licence before commercial use. Not legal, tax or investment advice.

New here? Start here → explains what a gongban is, the four steps and the first-timer mistakes. Come back to this pack afterwards.

Effort (estimate)12–16 team-weeks
Unit BOM (estimate)€40–60
Price (estimate)€249–349
External market checkLikely
Boards referenced4 catalogue boards

Order of operations: read the summary, then validate demand (section 2) with real customers before you touch the start kit or e-mail anyone in Who to contact (section 5). New to hardware? The zero-experience founder playbook covers validation, samples, the first quote, CE/FCC, customs and fulfilment for all 50 ideas.

1 · Summary · the one-page version

Summary

  • Problem: A child with cerebral palsy or an adult after a stroke can move one thing — a hand an inch, a head, a knee. Making music with that movement today means either a £2,500–3,500 ultrasonic system, a discontinued squishy cube, or a therapist improvising with an iPad and tape.
  • Customer: Music therapists, special-needs schools, inclusive-music charities and community music centres in UK/DE/NL/Nordics. Schools and charities pay from arts/inclusion budgets; therapists recommend and use; the player plays.
  • Product: a rugged tabletop box with 4 big faders, 4 encoders with light rings, a joystick, 2 arcade buttons and 2 assistive-switch jacks; scale/chord quantisation so every gesture sounds right; built-in General-MIDI synth and speaker; USB and 5-pin MIDI out; wheelchair-tray mount. €299 incl. VAT.
  • Why now: MIDI, synth, fader and encoder units are off-the-shelf catalogue parts; inclusive music is funded by arts councils and schools; the price gap between €300 and €3,000 is empty.
  • The ask: ~€60k to the first 1,000 units; school/charity pre-orders fund a third.

External market check (November 2026): LIKELY. Direct competitors are active: Skoog (about £180–230), Cosmo / Filisia (about $199 per dot), AptiPlay (open source, pitched as the cheaper DIY alternative) and the older Device One / One6 from Drake Music Project NI. The OHMI Trust (UK, Arts Council-funded) exists because adapted instruments are not cheap, confirming a funding-constrained institutional buyer class looking for lower-cost options. €299 sits above Skoog and Cosmo but far below Soundbeam (£2,505–4,595 for a full kit). Main risk: Skoog and Cosmo already occupy this niche at lower prices; €299 has to clearly beat a $199 Skoog, not match it. As researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast. Competitors and sources found: see the market check in the competition table.

2 · Validate demand · before anything else

Validate demand first

Do this before anything else in this pack: before the business plan, before you order a sample board, and long before you e-mail a factory (section 5). The classic first-time mistake is to source and build first and find out later that nobody wanted it. Hardware mistakes are slow and expensive to undo; 15–20 conversations are cheap.

The gate: this idea's kill question

Do 5 music therapists use a prototype for a month and would 3 of them buy two units at €299?

You pass this section when you can answer that question with evidence you collected yourself, not a guess: a measured conversion on a fake-door landing page for the consumer side and, for the business side, at least three decision-makers who put something on paper: a letter of intent, a paid pilot or a purchase order. Until then: no factory e-mail, no sample order, no firmware, no logo. If the answer is no, you have lost a few weeks and saved the rest.

Who you are looking for

The audience named in the idea: Music therapists, special-needs schools, inclusive-music charities and community music centres in UK/DE/NL/Nordics.

The problem as the pack states it: A child with cerebral palsy or an adult after a stroke can move one thing — a hand an inch, a head, a knee. Making music with that movement today means either a £2,500–3,500 ultrasonic system, a discontinued squishy cube, or a therapist improvising with an iPad and tape.

Talk to the people who have the problem and the people who pay; in B2B they are often not the same person, and the one who pays decides.

Where to find them

Communities and associations where this audience actually talks, as far as we know them in November 2026. Confirm each is still active and read its rules on self-promotion before posting; most allow a genuine question about a problem and ban a pitch.

Beyond the named ones, the same four methods work for every idea on this site:

  • Search for communities around the problem, not the product: forums, Facebook groups, Discord servers and newsletters in your own country for the terms in the audience line above. Many of the best groups are national and in the local language; a Dutch or German group beats a global English one for an EU launch.
  • Trade associations and their regional meetings for the B2B audiences: one meeting puts twenty buyers in a room, and the association newsletter will often run a short survey for a member.
  • LinkedIn: search people by the job titles in the audience line, message ten a day with one question (not a pitch), and ask for twenty minutes. Expect one in five to say yes.
  • Your deposit list from the kill question and anyone who replied to the fake door: those are the first interviews, not the last.

The plan: 15–20 conversations, then a fake door

  1. 15–20 real conversations (ten buyers from the business side and ten from the consumer side), fifteen minutes each, using the script below. Before writing a line of code or ordering a board. Write up each one the same day: the problem in their words, what they do today, what it costs them, what they said when you named the price.
  2. A fake door. One page: the pitch as the headline, a rendered image or a photo of a cardboard mock-up, the price (€249–349, the pack's estimate), and one button. Two buttons: a refundable deposit or waitlist for consumers, "request a pilot" for businesses.
  3. Send it to everyone you interviewed and post it, with the problem question first, in the communities above. Run it for two to four weeks.
  4. Count against the kill question. Then decide: go, change the idea, or stop.

Interview script (fifteen minutes, problem first)

Ask, then be quiet. Do not describe the product until question 5; if you pitch first you will only hear politeness.

Pre-order / pilot message (forum post or direct message)

Reading the signal

Real signalFalse positive
A refundable deposit, a signed LOI, a paid pilot, a calendar invite for the prototype"Sounds cool", "I would totally buy that", likes and upvotes
They describe the problem unprompted and in detail, with numbersThey agree with your description of the problem
They have already paid for a workaround (a product, a service, their own time)They have never tried anything and are not bothered
Landing-page conversion to deposit or form above the pack's pass mark, from cold trafficConversion from friends, family and your own network
A named budget and a named decision-maker (B2B)An enthusiastic user who cannot buy

Go / no-go

  • Go to section 3 (business plan) and section 4 (start kit) when the kill question above is met by your own numbers, you have 15–20 written-up conversations, and at least one real signal from the left column per segment you plan to sell to. Only then does section 5 (Who to contact) apply.
  • Change the idea when the problem is real but the price, the buyer or the form factor in the pitch is wrong: the interviews will tell you which. Rewrite the pitch and run the fake door again; this is normal and costs a week.
  • Stop when the kill question fails on honest numbers, or when nobody you talked to has paid for a workaround. Pick another idea on this site; the boards in the start kit are not wasted, only unused.

The full worksheet, with how to define the segment and run the fake door, is in the playbook → validate demand.

3 · Business plan · estimates, not a forecast

Business plan

Problem & customer

Music therapists and inclusive-music teachers need instruments that (a) respond to tiny or gross movements, (b) never sound wrong (quantise to a scale/chord so the player is always "in"), (c) connect to the switches and mounts they already own (3.5 mm assistive switches, wheelchair tray clamps), and (d) make sound by themselves — a laptop is one more thing to fail. The high end (Soundbeam 6: solo £2,505, group £3,525 ex-VAT) is excellent and funded by grants; the low end (Skoog 2.0 at ~US$380, discontinued at some retailers) was loved and is going away; the charity-built accessible instrument is software-first. In between there is nothing a school can buy three of.

Who pays: special-needs schools (equipment budgets, often with charity top-ups), inclusive-music charities and orchestras, music therapy practices (self-employed therapists buy their own tools), community music centres; some national health/education bodies fund assistive music tech. Who uses: therapists in sessions; players at home in the second year.

Market size (estimates — check them)

  • TAM: >5,500 music therapists in Europe (EMTC, 2015 — surely more now), ~1,000-class in the UK alone (HCPC registrations), plus ~15,000 special-needs schools and units in the EU/UK (estimate) and ~2,000 inclusive-music organisations. If each therapist owns one and each school two → ~40,000 units ≈ €12 M one-off, plus a home-player market behind it.
  • SAM: UK/DE/NL/Nordics via therapist associations, SEN school suppliers and charities → ~40% → ~€5 M, replacement every 5–6 years.
  • SOM (3 years): 4,000 units ≈ €1 M revenue.
AlternativePrice (est.)Weakness
Soundbeam 6 (ultrasonic movement-to-sound)£2,505–3,525 ex-VATPrice, needs a trained operator; brilliant but grant-only
Skoog 2.0 (tactile cube, iOS/Mac)~US$380, discontinued at some retailersNeeds an iPad, availability uncertain
Clarion (charity, software, played by touch/mouse/head/eye)low cost (price not found)Software-first; needs a computer and setup
iPad apps (GarageBand, touch synths) + a stand€0–30 + iPadFlat glass, no tactile feedback, hard to switch-adapt
Switch-adapted toys/percussion€50–200One sound, no musical range
Do nothing — tambourine€10—

Wedge: tactile, rugged, self-sounding, switch-ready, quantised, €299. Sell to the therapist who wants three, not the grant committee.

External market check

Competitors, demand signals and price comparables found by web search in November 2026. Sources are named as found and not linked; as researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast.

Who / sourceWhat it isWhat it tells us
SkoogAbout £180–230Direct competitor, cheaper
Cosmo / FilisiaAbout $199 per dotDirect competitor, cheaper
AptiPlayOpen source, pitched as the cheaper DIY alternativeFree substitute for makers
Device One / One6 (Drake Music Project NI)Older accessible instrumentsPrecedent
Soundbeam£2,505–4,595 full kitThe expensive end of the market
OHMI Trust (Arts Council-funded)Exists because adapted instruments are not cheapConfirms the buyer class and its budget constraint

Verdict as researched: LIKELY. Main risk: Skoog and Cosmo already occupy this niche at lower prices; €299 has to clearly beat a $199 Skoog, not match it.

Product & value proposition

  • Hardware: 300 × 200 mm ABS/aluminium box; 4× 60 mm faders with big caps, 4 encoders with RGB rings, 1 joystick (spring return), 2× 60 mm arcade buttons, 2× 3.5 mm assistive-switch jacks (plus 1 expression-pedal jack), built-in GM synth + 3 W speaker, line out, USB-C (USB MIDI class device + power), 5-pin MIDI out, BLE MIDI as a later SKU, tray/stand mounting inserts.
  • Firmware: every control maps to notes in the chosen scale/chord; "one-switch" mode steps through a melody or chord progression per press; "any movement" mode on the joystick; therapist presets (10 slots) and a simple web configurator (USB, no cloud).
  • Pricing: €299 incl. VAT (€249 ex-VAT); school/charity 3-pack €699 ex-VAT; therapist price €229 ex-VAT via associations; mount kit €39; BLE MIDI SKU +€40.

Unit economics (estimates, per unit)

Item1,000 units5,000 units
Electronics BOM (ESP32-S3 €3, GM synth IC €5, codec/amp, 4 faders €8, 4 encoders+RGB €6, joystick €3, buttons €4, jacks, PCB)€42€33
Assembly & test (all controls + audio)€9€6
Enclosure (ABS base, alu top plate, large caps)€12€8
Packaging + preset card€4€3
Freight + duty to EU€3.50€2
Certification amortised (€8k EMC; +€10k if BLE)€8€1.60
Landed cost€78.50€53.60
Sell price ex-VAT direct€249€249
Therapist/3-pack net€229–233€229–233
Gross margin direct68%78%
Gross margin via SEN supplier (net €160)51%66%

Go-to-market

First 100 customers: 5 music therapists trial a prototype for a month (the kill question); the national music-therapy associations' conferences and newsletters; inclusive-music charities' practitioner networks (they run training days — bring 5 units); SEN school music coordinators via the SEN teacher forums; a video of a one-switch player leading a band.

Scale: SEN school suppliers' catalogues, music-therapy equipment dealers, inclusive-orchestra programmes, music retailers' education desks, DE/NL/Nordic therapist associations; the home-player SKU via Amazon once the therapist base exists.

12-month plan

  • Q1: Prototypes from Unit MIDI + Unit Synth + 8Encoder + Fader on an ESP32-S3 in a laser-cut box; 5 therapists, 1 month. Gate: 3 of 5 would buy two at €299.
  • Q2: Own PCB, enclosure tooling, quantisation firmware with therapist presets, EMC test, 300 units.
  • Q3: Association listings, charity training days, 3-pack, mount kit, 1,000 units.
  • Q4: BLE MIDI SKU (RED + EN 18031 budget), home-player packaging, FR/DE presets.

Team: embedded/audio engineer (full-time 6 months), mechanical designer (8 weeks), a music therapist as paid co-designer (critical), founder on sales. A web developer for the configurator.

Funding to 1,000 units (estimate): NRE €30k (PCB, tooling €12k, configurator, presets with therapists) + certification €8k + 1,000 × €67 production = €67k → ~€105k; school/charity pre-orders and 3-packs ~€40k → cash need ~€60k. Route: pre-orders + arts/inclusion grants (arts councils and disability-innovation funds like this product) + possibly a charity partnership that pre-buys 100 units.

Top risks

  • Technical — low: controls + MIDI + a synth IC. The risks are mechanical robustness (faders get yanked, buttons get hit with a fist — spec for it) and latency (keep audio in the synth IC; <10 ms).
  • Market — budgets are institutional and slow: Mitigation: €299 is under most "no approval needed" thresholds; therapists buy their own tools; 3-pack for schools.
  • Regulatory: EMC/LVD (USB or external PSU, SELV), RoHS/WEEE; RED only with BLE; not a medical device (music-making; don't claim therapy outcomes); Toy Directive: players include children under 14 — keep it an educational/musical instrument marketed to institutions and adults, not "a toy", and get a written opinion; EN 71 testing on caps as a precaution is cheap.
  • Supply: the GM synth IC in the catalogue unit is a single-source part (check the Unit Synth datasheet for the exact IC); faders with 60 mm travel from two makers. Mitigation: buy 2,000 synth ICs early or design a software-synth fallback on the ESP32-S3.
  • Licence: all four boards are modules without electronics files — you design your own PCB; nothing to infringe, but nothing to copy either.
4 · Start kit · boards, BOM, build plan, certification

Start kit

Boards to start from

BoardContributesFiles (catalogue)Licence note
m5stack-unit-midiMIDI in/out interface for prototypesenclosure/structure onlyModule
m5stack-unit-synthBuilt-in GM synthesizer so it sounds without a laptopenclosure/structure onlyModule
m5stack-unit-8encoderEight encoders with RGB feedback — prototype the encoder bankenclosure/structure onlyModule
m5stack-unit-faderLarge fader referenceenclosure/structure onlyModule

Block diagram and engineering gap

[4 faders][4 encoders+RGB][joystick][2 arcade buttons][2x 3.5mm switch jacks][expression jack]
            |
        ESP32-S3: quantiser (scale/chord), presets, USB MIDI device, 5-pin MIDI out, (BLE MIDI later)
            |-> [GM synth IC] -> [codec/amp] -> [3 W speaker] / line out
USB-C power/data ; optional 9 V PSU ; tray-mount inserts

Gap: the control panel mechanics (robust, big caps), quantisation and preset design with therapists, USB MIDI class device, the configurator, and the enclosure.

Starter BOM (per unit, estimates)

PartEst. costNote
ESP32-S3 module (certified, USB OTG)€3.00—
GM synth IC (per Unit Synth datasheet)€5.00Single source; stock early
4× 60 mm faders + big caps€8.00Two makers
4× encoders + RGB rings€6.00—
Joystick (spring-return, gated)€3.00Arcade-grade
2× 60 mm arcade buttons€4.00—
3× 3.5 mm jacks + 5-pin DIN + USB-C€2.00—
Codec + 3 W amp + speaker€3.50—
PCB + assembly€8.00—
ABS base + alu plate + caps€12Tool €12k

Firmware/software starting point

  • TinyUSB (exists; USB MIDI class) and the Arduino MIDI Library (exists) or Control Surface (exists; MIDI controllers on Arduino/ESP32). M5Stack publishes libraries for its Units (useful for the prototype). For scale quantisation, write it yourself — it's 50 lines.
  • Configurator: Web MIDI in the browser (exists in Chromium browsers) — no app store, no cloud.

12-week build plan

  • Week 1–2 — validate. ESP32-S3 devkit + Unit Synth + Unit MIDI + 8Encoder + Fader + a joystick in a laser-cut box; quantiser v0; 5 therapists for a month (start recruiting day 1). Exit: 3 of 5 would buy two at €299; players respond within the first session.
  • Week 3–5 — works-like. Own PCB, all controls, switch jacks, USB MIDI device, presets. Exit: a one-switch player leads a 4-chord song.
  • Week 6–8 — looks-like + EVT. Enclosure in final form, big caps, tray mount, configurator alpha. Exit: survives a fist-and-drop test; therapists set presets without you.
  • Week 9–10 — DVT + pre-compliance. Tooling, EMC pre-scan, mechanical life test (faders 50k cycles). Exit: pass.
  • Week 11–12 — pilot batch. 50 units: 20 therapists, 10 schools (3-packs), charity training day. Exit: 40 paid, <5% faults, 2 school 3-packs.

Certification checklist (EU)

  • EMC/LVD route (no radio): EN 55032/55035, EN 62368-1 (USB/SELV); self-declaration. Est. €4–8k.
  • RED for the BLE MIDI SKU: EN 300 328, EN 301 489; EN 18031 only if it connects to the internet via the phone — assume the lab will say yes; budget €10k.
  • RoHS, WEEE, REACH.
  • CRA: updatable firmware → SBOM, update path (USB), vulnerability contact.
  • Toy Directive: get a written opinion; market as a musical instrument for institutions and adults; EN 71-3 on the caps as a cheap precaution.
  • Not a medical device — no therapy-outcome claims. No battery in v1 (USB/PSU). No GDPR (no accounts).

Validation toolkit

  • Kill question: do 5 music therapists use a prototype for a month and would 3 of them buy two units at €299? Cheapest experiment: €700 — 5 laser-cut prototypes from catalogue units and 5 therapist loans.
  • 5-question interview: (1) Which players can't use your current instruments, and what do you do for them? (2) What would an instrument need so the player is always "in tune"? (3) Switch jacks, joystick, faders — which first? (4) €299 — your own purchase, the school's, or a grant? (5) What broke on the last accessible instrument you had?
  • Landing-page headline: "Any movement makes music. Always in key." Bullets: Big faders, encoders, joystick and assistive-switch jacks · Built-in sounds — no laptop, no app · €299, built for sessions, mounts on a wheelchair tray.
  • Pre-order pass: 30 therapist pre-orders or 10 school 3-packs in 6 weeks.

First production checklist

Fader/encoder/button samples with life-test results, synth IC from the authorised distributor, golden sample with preset bank v1, DFM on plate cut-outs and cap fits, MOQ 300 with a 2,000 forecast, QC/AQL Level II + 100% control sweep and audio test on a fixture, drop test in packaging (it will be dropped), FOB Shenzhen air for 300, EU importer + WEEE label, quick-start in large print with pictograms.

5 · Who to contact · from gongban.db

Who to contact

On file: 1 board publisher (M5Stack). Only useful once section 2 (validate demand) has passed. Everything below comes from gongban.db, the directory behind this site. It names the companies that publish the boards this idea is built from, the manufacturers on file, and directory entries in the same product category. None of it is a verified supplier relationship for this specific idea: nobody has quoted it yet. Company websites only; no personal contacts are published.

Board publishers (direct)

Manufacturing (PCBA / EMS) on file

  • Kingbrother / King Brother Technology · global.kingbrother.com/ — PCB fab + EMS; see the Kingbrother SOM page on this site.
  • Foxlink (SZ) (正崴精密工业(深圳)有限公司) · foxconn.com — PCBA + cable assembly EMS: Cable assembly; PCBA; connector; OEM for major electronics brands.

Also in the directory (category match, not idea-specific)

Companies in the gongban.db solution-house directory whose product category overlaps this idea. They were matched on the idea's tags, not on this design; none has seen it.

  • Jieli Technology (珠海市杰理科技股份有限公司) · zh-jieli.com — TWS SoC chip solution house: AC69xx/AC70xx TWS SoC; 27B+ chips shipped; clients: Xiaomi / QCY / HP / Lenovo. (Audio: speaker / earphone ODMs and the Jieli chip house)
  • Fenda Technology (深圳市奋达科技股份有限公司) · fenda.com — TWS earbuds / smart speaker ODM: TWS earbuds; smart speaker; smart home; clients: Amazon / Creative / Philips. (Audio: speaker / earphone ODMs and the Jieli chip house)
  • Haoern Acoustics (深圳市豪恩声学股份有限公司) · haoen.cn — TWS / headphone ODM: TWS; ANC headphone; smart speaker; clients: vivo / RAZER / BEATS / HP. (Audio: speaker / earphone ODMs and the Jieli chip house)
  • Antixun (深圳市安特信技术有限公司) · no website on file — TWS / smart audio ODM: TWS; ANC earphone; smart speaker; pivoted from solution house to ODM 2018. (Audio: speaker / earphone ODMs and the Jieli chip house)

MOQ and landed cost

gongban.db holds no MOQ, unit-price or tariff data for these companies, so none is shown. Get the numbers from the quote (the e-mail below asks for them) and run them through the landed-cost worksheet in the playbook. The starter BOM in the start kit section is an estimate, not a quote.

Outreach e-mail, ready to send

Fill in the [brackets], keep it short, and send it to the sales or "contact us" address on the company's own website. The Chinese version is the same letter; sending both in one mail is normal. How to read the reply: playbook → the first quote.

A. To a board publisher — samples and volume price (send to the sales / "contact us" address on the M5Stack website)

A. 中文版

B. To a PCBA / EMS house — quote from the open design files (send to Kingbrother, Foxlink or any assembler you vet; see the playbook)

B. 中文版

6 · Next steps · this week

Next steps (this week)

  1. Order an ESP32-S3 devkit, Unit Synth, Unit MIDI, Unit 8Encoder, Unit Fader and an arcade joystick; get a quantised scale playing from one fader.
  2. Email the national music-therapy association and one inclusive-music charity; recruit 5 therapists for a one-month trial in Q1.
  3. Read the Unit Synth datasheet to identify the synth IC and ask a distributor for 2,000-piece lead time; ask a lab for an EMC quote and a written opinion on the Toy Directive.
Get this built

Want this built?

Get sourcing and manufacturing help from a team in Shenzhen and Europe.

Never built hardware? Start with the zero-experience founder playbook: samples, the first quote, CE/FCC, customs, logistics and the kill question, in order. Board facts come from the catalogue; everything else in this pack is an estimate.

Get this built →

Start pack accessible-midi-instrument · written by the GONGBANS inventor from the public catalogue and public sources. Concept generated by the GONGBANS inventor from the public catalogue, then expanded into a start pack. Not a product, not validated; every number (market, BOM, price, effort, certification cost) is a rough estimate to be checked, not a quote. Check each board's licence before commercial use. Not legal, tax or investment advice. Idea page · Download as Markdown · All 50 start packs →