# One-Switch MIDI Instrument — Founder Start Pack

> A tabletop instrument with big faders, encoders and a joystick that any single movement can play, outputting MIDI and built-in synth sound — for music therapy, special-needs schools and inclusive bands.
>
> *Concept from the GONGBANS inventor. Not validated. All numbers are estimates — check them. Check every board's licence before commercial use.*

## 1. Summary

- **Problem:** A child with cerebral palsy or an adult after a stroke can move one thing — a hand an inch, a head, a knee. Making music with that movement today means either a £2,500–3,500 ultrasonic system, a discontinued squishy cube, or a therapist improvising with an iPad and tape.
- **Customer:** Music therapists, special-needs schools, inclusive-music charities and community music centres in UK/DE/NL/Nordics. Schools and charities pay from arts/inclusion budgets; therapists recommend and use; the player plays.
- **Product:** a rugged tabletop box with 4 big faders, 4 encoders with light rings, a joystick, 2 arcade buttons and 2 assistive-switch jacks; scale/chord quantisation so every gesture sounds right; built-in General-MIDI synth and speaker; USB and 5-pin MIDI out; wheelchair-tray mount. €299 incl. VAT.
- **Why now:** MIDI, synth, fader and encoder units are off-the-shelf catalogue parts; inclusive music is funded by arts councils and schools; the price gap between €300 and €3,000 is empty.
- **The ask:** ~€60k to the first 1,000 units; school/charity pre-orders fund a third.

<!-- market-check:start -->
> **External market check (November 2026): LIKELY.** Direct competitors are active: Skoog (about £180–230), Cosmo / Filisia (about $199 per dot), AptiPlay (open source, pitched as the cheaper DIY alternative) and the older Device One / One6 from Drake Music Project NI. The OHMI Trust (UK, Arts Council-funded) exists because adapted instruments are not cheap, confirming a funding-constrained institutional buyer class looking for lower-cost options. €299 sits above Skoog and Cosmo but far below Soundbeam (£2,505–4,595 for a full kit). **Main risk:** Skoog and Cosmo already occupy this niche at lower prices; €299 has to clearly beat a $199 Skoog, not match it. *As researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast. Competitors and sources found: see [the market check in the competition table](#external-market-check).*
<!-- market-check:end -->

## 2. Validate demand first

<!-- validate-demand:start -->
**Do this before anything else in this pack: before the business plan, before you order a sample board, and long before you e-mail a factory (section 5).** The classic first-time mistake is to source and build first and find out later that nobody wanted it. Hardware mistakes are slow and expensive to undo; 15–20 conversations are cheap.

### The gate: this idea's kill question

> Do 5 music therapists use a prototype for a month and would 3 of them buy two units at €299?

You pass this section when you can answer that question with evidence you collected yourself, not a guess: a measured conversion on a fake-door landing page for the consumer side and, for the business side, at least three decision-makers who put something on paper: a letter of intent, a paid pilot or a purchase order. Until then: no factory e-mail, no sample order, no firmware, no logo. If the answer is no, you have lost a few weeks and saved the rest.

### Who you are looking for

**The audience named in the idea:** Music therapists, special-needs schools, inclusive-music charities and community music centres in UK/DE/NL/Nordics.

**The problem as the pack states it:** A child with cerebral palsy or an adult after a stroke can move one thing — a hand an inch, a head, a knee. Making music with that movement today means either a £2,500–3,500 ultrasonic system, a discontinued squishy cube, or a therapist improvising with an iPad and tape.

Talk to the people who have the problem *and* the people who pay; in B2B they are often not the same person, and the one who pays decides.

### Where to find them

Communities and associations where this audience actually talks, as far as we know them in November 2026. Confirm each is still active and read its rules on self-promotion before posting; most allow a genuine question about a problem and ban a pitch.

- **Drake Music (UK)** · https://www.drakemusic.org/ — accessible music technology charity.
- **OHMI Trust (UK)** · https://www.ohmi.org.uk/ — one-handed musical instruments; runs a competition for exactly this.
- **r/synthesizers** · https://www.reddit.com/r/synthesizers/ — synth and MIDI musicians.
- **r/WeAreTheMusicMakers** · https://www.reddit.com/r/WeAreTheMusicMakers/ — musicians and music teachers.
- **lines (llllllll.co)** · https://llllllll.co/ — experimental-music and instrument-builder community.

Beyond the named ones, the same four methods work for every idea on this site:

- **Search for communities around the problem, not the product:** forums, Facebook groups, Discord servers and newsletters in your own country for the terms in the audience line above. Many of the best groups are national and in the local language; a Dutch or German group beats a global English one for an EU launch.
- **Trade associations and their regional meetings** for the B2B audiences: one meeting puts twenty buyers in a room, and the association newsletter will often run a short survey for a member.
- **LinkedIn:** search people by the job titles in the audience line, message ten a day with one question (not a pitch), and ask for twenty minutes. Expect one in five to say yes.
- **Your deposit list from the kill question** and anyone who replied to the fake door: those are the first interviews, not the last.

### The plan: 15–20 conversations, then a fake door

1. **15–20 real conversations** (ten buyers from the business side and ten from the consumer side), fifteen minutes each, using the script below. Before writing a line of code or ordering a board. Write up each one the same day: the problem in their words, what they do today, what it costs them, what they said when you named the price.
2. **A fake door.** One page: the pitch as the headline, a rendered image or a photo of a cardboard mock-up, the price (€249–349, the pack's estimate), and one button. Two buttons: a refundable deposit or waitlist for consumers, "request a pilot" for businesses.
3. **Send it** to everyone you interviewed and post it, with the problem question first, in the communities above. Run it for two to four weeks.
4. **Count** against the kill question. Then decide: go, change the idea, or stop.

### Interview script (fifteen minutes, problem first)

Ask, then be quiet. Do not describe the product until question 5; if you pitch first you will only hear politeness.

```email
Thanks for the time. I am looking into how music therapists, special-needs schools, inclusive-music charities and community music centres in UK/DE/NL/Nordics deal with [the problem in their words]; I have not built anything yet and I am trying to find out whether it is worth building.

1. Tell me about the last lesson or session where an instrument did not fit the player: what did you use instead?
2. What do you do about it today, and what does that cost you in money or time per month?
3. What have you already tried or bought, and why did you stop using it?
4. If this went away tomorrow, what would change for you? (If the answer is "not much", you have your answer.)
5. [Only now describe it in one sentence:] A tabletop instrument with big faders, encoders and a joystick that any single movement can play, outputting MIDI and built-in synth sound — for music therapy, special-needs schools and inclusive bands. On a scale of one to ten, how likely would you be to buy that at €249–349, and what would make it a ten?
6. Who else should I talk to about this? (Ask for two names.)

Close: "If I build this, can I come back to you with a prototype?" A yes with a calendar date is worth more than any compliment.
```

### Pre-order / pilot message (forum post or direct message)

```email
Subject: One-Switch MIDI Instrument: would you pay €249–349 for this? Looking for 20 people to tell me I am wrong

I am [your name], [your background]. I am considering building a One-Switch MIDI Instrument: A tabletop instrument with big faders, encoders and a joystick that any single movement can play, outputting MIDI and built-in synth sound — for music therapy, special-needs schools and inclusive bands. Before I order a single part I want to know whether this is a real problem for people like you or only in my head.

If you would want one at €249–349, the page at [link] takes a fully refundable €[10–20] deposit (or a waitlist e-mail if you prefer); if twenty people do that, I build it, if not, everyone gets their money back and I have learned something.

Either way, two questions: how do you deal with this today, and what would make you say no? Honest answers are worth more to me than deposits.
```

### Reading the signal

| Real signal | False positive |
|---|---|
| A refundable deposit, a signed LOI, a paid pilot, a calendar invite for the prototype | "Sounds cool", "I would totally buy that", likes and upvotes |
| They describe the problem unprompted and in detail, with numbers | They agree with your description of the problem |
| They have already paid for a workaround (a product, a service, their own time) | They have never tried anything and are not bothered |
| Landing-page conversion to deposit or form above the pack's pass mark, from cold traffic | Conversion from friends, family and your own network |
| A named budget and a named decision-maker (B2B) | An enthusiastic user who cannot buy |

### Go / no-go

- **Go to section 3 (business plan) and section 4 (start kit)** when the kill question above is met by your own numbers, you have 15–20 written-up conversations, and at least one real signal from the left column per segment you plan to sell to. Only then does section 5 (Who to contact) apply.
- **Change the idea** when the problem is real but the price, the buyer or the form factor in the pitch is wrong: the interviews will tell you which. Rewrite the pitch and run the fake door again; this is normal and costs a week.
- **Stop** when the kill question fails on honest numbers, or when nobody you talked to has paid for a workaround. Pick another idea on this site; the boards in the start kit are not wasted, only unused.

The full worksheet, with how to define the segment and run the fake door, is in the [playbook → validate demand](/playbook.html#validate).
<!-- validate-demand:end -->

## 3. Business plan

### Problem & customer
Music therapists and inclusive-music teachers need instruments that (a) respond to tiny or gross movements, (b) never sound wrong (quantise to a scale/chord so the player is always "in"), (c) connect to the switches and mounts they already own (3.5 mm assistive switches, wheelchair tray clamps), and (d) make sound by themselves — a laptop is one more thing to fail. The high end (Soundbeam 6: solo £2,505, group £3,525 ex-VAT) is excellent and funded by grants; the low end (Skoog 2.0 at ~US$380, discontinued at some retailers) was loved and is going away; the charity-built accessible instrument is software-first. In between there is nothing a school can buy three of.

Who pays: special-needs schools (equipment budgets, often with charity top-ups), inclusive-music charities and orchestras, music therapy practices (self-employed therapists buy their own tools), community music centres; some national health/education bodies fund assistive music tech. Who uses: therapists in sessions; players at home in the second year.

### Market size (estimates — check them)
- **TAM:** >5,500 music therapists in Europe (EMTC, 2015 — surely more now), ~1,000-class in the UK alone (HCPC registrations), plus ~15,000 special-needs schools and units in the EU/UK (estimate) and ~2,000 inclusive-music organisations. If each therapist owns one and each school two → ~40,000 units ≈ **€12 M** one-off, plus a home-player market behind it.
- **SAM:** UK/DE/NL/Nordics via therapist associations, SEN school suppliers and charities → ~40% → **~€5 M**, replacement every 5–6 years.
- **SOM (3 years):** 4,000 units ≈ **€1 M revenue**.

### Competition (1 search)
| Alternative | Price (est.) | Weakness |
|---|---|---|
| Soundbeam 6 (ultrasonic movement-to-sound) | £2,505–3,525 ex-VAT | Price, needs a trained operator; brilliant but grant-only |
| Skoog 2.0 (tactile cube, iOS/Mac) | ~US$380, discontinued at some retailers | Needs an iPad, availability uncertain |
| Clarion (charity, software, played by touch/mouse/head/eye) | low cost (price not found) | Software-first; needs a computer and setup |
| iPad apps (GarageBand, touch synths) + a stand | €0–30 + iPad | Flat glass, no tactile feedback, hard to switch-adapt |
| Switch-adapted toys/percussion | €50–200 | One sound, no musical range |
| Do nothing — tambourine | €10 | — |

**Wedge:** tactile, rugged, self-sounding, switch-ready, quantised, €299. Sell to the therapist who wants three, not the grant committee.

<!-- market-competitors:start -->
#### External market check

Competitors, demand signals and price comparables found by web search in November 2026. Sources are named as found and not linked; as researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast.

| Who / source | What it is | What it tells us |
|---|---|---|
| Skoog | About £180–230 | Direct competitor, cheaper |
| Cosmo / Filisia | About $199 per dot | Direct competitor, cheaper |
| AptiPlay | Open source, pitched as the cheaper DIY alternative | Free substitute for makers |
| Device One / One6 (Drake Music Project NI) | Older accessible instruments | Precedent |
| Soundbeam | £2,505–4,595 full kit | The expensive end of the market |
| OHMI Trust (Arts Council-funded) | Exists because adapted instruments are not cheap | Confirms the buyer class and its budget constraint |

**Verdict as researched: LIKELY.** Main risk: Skoog and Cosmo already occupy this niche at lower prices; €299 has to clearly beat a $199 Skoog, not match it.
<!-- market-competitors:end -->

### Product & value proposition
- **Hardware:** 300 × 200 mm ABS/aluminium box; 4× 60 mm faders with big caps, 4 encoders with RGB rings, 1 joystick (spring return), 2× 60 mm arcade buttons, 2× 3.5 mm assistive-switch jacks (plus 1 expression-pedal jack), built-in GM synth + 3 W speaker, line out, USB-C (USB MIDI class device + power), 5-pin MIDI out, BLE MIDI as a later SKU, tray/stand mounting inserts.
- **Firmware:** every control maps to notes in the chosen scale/chord; "one-switch" mode steps through a melody or chord progression per press; "any movement" mode on the joystick; therapist presets (10 slots) and a simple web configurator (USB, no cloud).
- **Pricing:** **€299 incl. VAT** (€249 ex-VAT); school/charity 3-pack €699 ex-VAT; therapist price €229 ex-VAT via associations; mount kit €39; BLE MIDI SKU +€40.

### Unit economics (estimates, per unit)
| Item | 1,000 units | 5,000 units |
|---|---|---|
| Electronics BOM (ESP32-S3 €3, GM synth IC €5, codec/amp, 4 faders €8, 4 encoders+RGB €6, joystick €3, buttons €4, jacks, PCB) | €42 | €33 |
| Assembly & test (all controls + audio) | €9 | €6 |
| Enclosure (ABS base, alu top plate, large caps) | €12 | €8 |
| Packaging + preset card | €4 | €3 |
| Freight + duty to EU | €3.50 | €2 |
| Certification amortised (€8k EMC; +€10k if BLE) | €8 | €1.60 |
| **Landed cost** | **€78.50** | **€53.60** |
| Sell price ex-VAT direct | €249 | €249 |
| Therapist/3-pack net | €229–233 | €229–233 |
| **Gross margin direct** | **68%** | **78%** |
| **Gross margin via SEN supplier (net €160)** | 51% | 66% |

### Go-to-market
**First 100 customers:** 5 music therapists trial a prototype for a month (the kill question); the national music-therapy associations' conferences and newsletters; inclusive-music charities' practitioner networks (they run training days — bring 5 units); SEN school music coordinators via the SEN teacher forums; a video of a one-switch player leading a band.

**Scale:** SEN school suppliers' catalogues, music-therapy equipment dealers, inclusive-orchestra programmes, music retailers' education desks, DE/NL/Nordic therapist associations; the home-player SKU via Amazon once the therapist base exists.

### 12-month plan
- **Q1:** Prototypes from Unit MIDI + Unit Synth + 8Encoder + Fader on an ESP32-S3 in a laser-cut box; 5 therapists, 1 month. Gate: 3 of 5 would buy two at €299.
- **Q2:** Own PCB, enclosure tooling, quantisation firmware with therapist presets, EMC test, 300 units.
- **Q3:** Association listings, charity training days, 3-pack, mount kit, 1,000 units.
- **Q4:** BLE MIDI SKU (RED + EN 18031 budget), home-player packaging, FR/DE presets.

**Team:** embedded/audio engineer (full-time 6 months), mechanical designer (8 weeks), a music therapist as paid co-designer (critical), founder on sales. A web developer for the configurator.

**Funding to 1,000 units (estimate):** NRE €30k (PCB, tooling €12k, configurator, presets with therapists) + certification €8k + 1,000 × €67 production = €67k → **~€105k**; school/charity pre-orders and 3-packs ~€40k → cash need **~€60k**. Route: pre-orders + arts/inclusion grants (arts councils and disability-innovation funds like this product) + possibly a charity partnership that pre-buys 100 units.

### Top risks
- **Technical — low:** controls + MIDI + a synth IC. The risks are mechanical robustness (faders get yanked, buttons get hit with a fist — spec for it) and latency (keep audio in the synth IC; <10 ms).
- **Market — budgets are institutional and slow:** Mitigation: €299 is under most "no approval needed" thresholds; therapists buy their own tools; 3-pack for schools.
- **Regulatory:** EMC/LVD (USB or external PSU, SELV), RoHS/WEEE; RED only with BLE; **not a medical device** (music-making; don't claim therapy outcomes); **Toy Directive:** players include children under 14 — keep it an educational/musical instrument marketed to institutions and adults, not "a toy", and get a written opinion; EN 71 testing on caps as a precaution is cheap.
- **Supply:** the GM synth IC in the catalogue unit is a single-source part (check the Unit Synth datasheet for the exact IC); faders with 60 mm travel from two makers. Mitigation: buy 2,000 synth ICs early or design a software-synth fallback on the ESP32-S3.
- **Licence:** all four boards are modules without electronics files — you design your own PCB; nothing to infringe, but nothing to copy either.

## 4. Start kit

### Boards to start from
| Board | Contributes | Files (catalogue) | Licence note |
|---|---|---|---|
| [m5stack-unit-midi](https://www.gongbans.com/db/m5stack-unit-midi.html) | MIDI in/out interface for prototypes | enclosure/structure only | Module |
| [m5stack-unit-synth](https://www.gongbans.com/db/m5stack-unit-synth.html) | Built-in GM synthesizer so it sounds without a laptop | enclosure/structure only | Module |
| [m5stack-unit-8encoder](https://www.gongbans.com/db/m5stack-unit-8encoder.html) | Eight encoders with RGB feedback — prototype the encoder bank | enclosure/structure only | Module |
| [m5stack-unit-fader](https://www.gongbans.com/db/m5stack-unit-fader.html) | Large fader reference | enclosure/structure only | Module |

### Block diagram and engineering gap
```
[4 faders][4 encoders+RGB][joystick][2 arcade buttons][2x 3.5mm switch jacks][expression jack]
            |
        ESP32-S3: quantiser (scale/chord), presets, USB MIDI device, 5-pin MIDI out, (BLE MIDI later)
            |-> [GM synth IC] -> [codec/amp] -> [3 W speaker] / line out
USB-C power/data ; optional 9 V PSU ; tray-mount inserts
```
Gap: the control panel mechanics (robust, big caps), quantisation and preset design with therapists, USB MIDI class device, the configurator, and the enclosure.

### Starter BOM (per unit, estimates)
| Part | Est. cost | Note |
|---|---|---|
| ESP32-S3 module (certified, USB OTG) | €3.00 | — |
| GM synth IC (per Unit Synth datasheet) | €5.00 | Single source; stock early |
| 4× 60 mm faders + big caps | €8.00 | Two makers |
| 4× encoders + RGB rings | €6.00 | — |
| Joystick (spring-return, gated) | €3.00 | Arcade-grade |
| 2× 60 mm arcade buttons | €4.00 | — |
| 3× 3.5 mm jacks + 5-pin DIN + USB-C | €2.00 | — |
| Codec + 3 W amp + speaker | €3.50 | — |
| PCB + assembly | €8.00 | — |
| ABS base + alu plate + caps | €12 | Tool €12k |

### Firmware/software starting point
- **TinyUSB** (exists; USB MIDI class) and the **Arduino MIDI Library** (exists) or **Control Surface** (exists; MIDI controllers on Arduino/ESP32). M5Stack publishes libraries for its Units (useful for the prototype). For scale quantisation, write it yourself — it's 50 lines.
- Configurator: Web MIDI in the browser (exists in Chromium browsers) — no app store, no cloud.

### 12-week build plan
- **Week 1–2 — validate.** ESP32-S3 devkit + Unit Synth + Unit MIDI + 8Encoder + Fader + a joystick in a laser-cut box; quantiser v0; 5 therapists for a month (start recruiting day 1). *Exit:* 3 of 5 would buy two at €299; players respond within the first session.
- **Week 3–5 — works-like.** Own PCB, all controls, switch jacks, USB MIDI device, presets. *Exit:* a one-switch player leads a 4-chord song.
- **Week 6–8 — looks-like + EVT.** Enclosure in final form, big caps, tray mount, configurator alpha. *Exit:* survives a fist-and-drop test; therapists set presets without you.
- **Week 9–10 — DVT + pre-compliance.** Tooling, EMC pre-scan, mechanical life test (faders 50k cycles). *Exit:* pass.
- **Week 11–12 — pilot batch.** 50 units: 20 therapists, 10 schools (3-packs), charity training day. *Exit:* 40 paid, <5% faults, 2 school 3-packs.

### Certification checklist (EU)
- **EMC/LVD route** (no radio): EN 55032/55035, EN 62368-1 (USB/SELV); self-declaration. Est. **€4–8k**.
- **RED** for the BLE MIDI SKU: EN 300 328, EN 301 489; **EN 18031** only if it connects to the internet via the phone — assume the lab will say yes; budget €10k.
- **RoHS, WEEE, REACH**.
- **CRA:** updatable firmware → SBOM, update path (USB), vulnerability contact.
- **Toy Directive:** get a written opinion; market as a musical instrument for institutions and adults; EN 71-3 on the caps as a cheap precaution.
- **Not a medical device** — no therapy-outcome claims. No battery in v1 (USB/PSU). No GDPR (no accounts).

### Validation toolkit
- **Kill question:** do 5 music therapists use a prototype for a month and would 3 of them buy two units at €299? **Cheapest experiment:** €700 — 5 laser-cut prototypes from catalogue units and 5 therapist loans.
- **5-question interview:** (1) Which players can't use your current instruments, and what do you do for them? (2) What would an instrument need so the player is always "in tune"? (3) Switch jacks, joystick, faders — which first? (4) €299 — your own purchase, the school's, or a grant? (5) What broke on the last accessible instrument you had?
- **Landing-page headline:** "Any movement makes music. Always in key." Bullets: Big faders, encoders, joystick and assistive-switch jacks · Built-in sounds — no laptop, no app · €299, built for sessions, mounts on a wheelchair tray.
- **Pre-order pass:** 30 therapist pre-orders or 10 school 3-packs in 6 weeks.

### First production checklist
Fader/encoder/button samples with life-test results, synth IC from the authorised distributor, golden sample with preset bank v1, DFM on plate cut-outs and cap fits, MOQ 300 with a 2,000 forecast, QC/AQL Level II + 100% control sweep and audio test on a fixture, drop test in packaging (it will be dropped), FOB Shenzhen air for 300, EU importer + WEEE label, quick-start in large print with pictograms.

## 5. Who to contact

<!-- who-to-contact:start -->
**On file: 1 board publisher (M5Stack).** Only useful once section 2 (validate demand) has passed. Everything below comes from gongban.db, the directory behind this site. It names the companies that publish the boards this idea is built from, the manufacturers on file, and directory entries in the same product category. None of it is a verified supplier relationship for this specific idea: nobody has quoted it yet. Company websites only; no personal contacts are published.

### Board publishers (direct)

- **M5Stack** — community / maker brand; 274 boards in the catalogue; files via M5Stack M5_Hardware repo · https://github.com/m5stack/M5_Hardware. Boards used here: [M5Stack Unit MIDI (U187)](/db/m5stack-unit-midi.html) (MIDI in/out interface); [M5Stack Unit Synth (U178)](/db/m5stack-unit-synth.html) (built-in synthesizer so it sounds without a laptop); [M5Stack Unit 8Encoder (U153)](/db/m5stack-unit-8encoder.html) (eight encoders with RGB feedback); [M5Stack Unit Fader (U123)](/db/m5stack-unit-fader.html) (large motor-free fader reference). What to ask for: sample units of the SKUs above, unit pricing at 100 / 500 / 1,000, whether a customised variant is possible (and its NRE and MOQ), and the module's radio test reports if any.

### Manufacturing (PCBA / EMS) on file

- **Kingbrother / King Brother Technology** · https://global.kingbrother.com/ — PCB fab + EMS; see the [Kingbrother SOM page](/boards-kingbrother.html) on this site.
- **Foxlink (SZ)** (正崴精密工业(深圳)有限公司) · foxconn.com — PCBA + cable assembly EMS: Cable assembly; PCBA; connector; OEM for major electronics brands.

### Also in the directory (category match, not idea-specific)

Companies in the gongban.db solution-house directory whose product category overlaps this idea. They were matched on the idea's tags, not on this design; none has seen it.

- **Jieli Technology** (珠海市杰理科技股份有限公司) · zh-jieli.com — TWS SoC chip solution house: AC69xx/AC70xx TWS SoC; 27B+ chips shipped; clients: Xiaomi / QCY / HP / Lenovo. *(Audio: speaker / earphone ODMs and the Jieli chip house)*
- **Fenda Technology** (深圳市奋达科技股份有限公司) · fenda.com — TWS earbuds / smart speaker ODM: TWS earbuds; smart speaker; smart home; clients: Amazon / Creative / Philips. *(Audio: speaker / earphone ODMs and the Jieli chip house)*
- **Haoern Acoustics** (深圳市豪恩声学股份有限公司) · haoen.cn — TWS / headphone ODM: TWS; ANC headphone; smart speaker; clients: vivo / RAZER / BEATS / HP. *(Audio: speaker / earphone ODMs and the Jieli chip house)*
- **Antixun** (深圳市安特信技术有限公司) · no website on file — TWS / smart audio ODM: TWS; ANC earphone; smart speaker; pivoted from solution house to ODM 2018. *(Audio: speaker / earphone ODMs and the Jieli chip house)*

### MOQ and landed cost

gongban.db holds no MOQ, unit-price or tariff data for these companies, so none is shown. Get the numbers from the quote (the e-mail below asks for them) and run them through the [landed-cost worksheet in the playbook](/playbook.html#landed-cost). The starter BOM in the start kit section is an estimate, not a quote.

### Outreach e-mail, ready to send

Fill in the [brackets], keep it short, and send it to the sales or "contact us" address on the company's own website. The Chinese version is the same letter; sending both in one mail is normal. How to read the reply: [playbook → the first quote](/playbook.html#quote).

**A. To a board publisher — samples and volume price** (send to the sales / "contact us" address on the M5Stack website)

```email
Subject: Sample order and volume pricing — M5Stack Unit MIDI (U187), M5Stack Unit Synth (U178), M5Stack Unit 8Encoder (U153), M5Stack Unit Fader (U123) — for a One-Switch MIDI Instrument

Hello [company] sales team,

I am [your name], founder of [your company] in [country]. We are developing a One-Switch MIDI Instrument: A tabletop instrument with big faders, encoders and a joystick that any single movement can play, outputting MIDI and built-in synth sound — for music therapy, special-needs schools and inclusive bands. The design is built around your M5Stack Unit MIDI (U187), M5Stack Unit Synth (U178), M5Stack Unit 8Encoder (U153), M5Stack Unit Fader (U123).

Could you please send:
1. Price and lead time for [10] sample units of each: M5Stack Unit MIDI (U187), M5Stack Unit Synth (U178), M5Stack Unit 8Encoder (U153), M5Stack Unit Fader (U123).
2. Unit pricing at 100 / 500 / 1,000 pieces, EXW Shenzhen and DDP [your city], including packaging.
3. Whether a customised variant is possible (our enclosure, connector, or firmware pre-loaded), with the NRE and MOQ for it.
4. Radio test reports or module certification documents, if available, so we can plan EU (CE/RED) certification.
5. Payment terms and accepted methods for a first order.

We can share our block diagram and target quantities under NDA if that helps.

Best regards,
[your name] · [your company] · [website] · [phone / WhatsApp]
```

**A. 中文版**

```email
主题：样品订购及批量报价 — M5Stack Unit MIDI (U187), M5Stack Unit Synth (U178), M5Stack Unit 8Encoder (U153), M5Stack Unit Fader (U123) — 用于One-Switch MIDI Instrument

[公司]销售团队，您好：

我是[姓名]，[国家][公司]的创始人。我们正在开发一款One-Switch MIDI Instrument：A tabletop instrument with big faders, encoders and a joystick that any single movement can play, outputting MIDI and built-in synth sound — for music therapy, special-needs schools and inclusive bands。产品设计基于贵司的M5Stack Unit MIDI (U187), M5Stack Unit Synth (U178), M5Stack Unit 8Encoder (U153), M5Stack Unit Fader (U123)。

请提供以下信息：
1. 各[10]片样品的单价和交期：M5Stack Unit MIDI (U187), M5Stack Unit Synth (U178), M5Stack Unit 8Encoder (U153), M5Stack Unit Fader (U123)。
2. 100 / 500 / 1,000 片的批量单价（深圳EXW及DDP到[城市]），含包装。
3. 是否可以定制（外壳、接口或预烧录固件），以及定制的NRE费用和最小起订量（MOQ）。
4. 如有，请提供射频测试报告或模组认证文件，以便我们规划欧盟CE/RED认证。
5. 首单的付款方式和条件。

如有需要，我们可在签署NDA后提供框图和目标数量。

祝好，
[姓名] · [公司] · [网站] · [电话 / WhatsApp]
```

**B. To a PCBA / EMS house — quote from the open design files** (send to Kingbrother, Foxlink or any assembler you vet; see the [playbook](/playbook.html#manufacturer))

```email
Subject: PCBA quote from open design files — One-Switch MIDI Instrument, [50] prototypes + [500] production units

Hello [company] sales team,

I am [your name], founder of [your company] in [country]. We are building a One-Switch MIDI Instrument: A tabletop instrument with big faders, encoders and a joystick that any single movement can play, outputting MIDI and built-in synth sound — for music therapy, special-needs schools and inclusive bands. The design starts from published open-hardware files (M5Stack Unit MIDI (U187), M5Stack Unit Synth (U178), M5Stack Unit 8Encoder (U153), M5Stack Unit Fader (U123); schematic, PCB and BOM available) with our own modifications.

Could you quote:
1. PCB fabrication + SMT assembly for [50] prototype units and [500 / 1,000] production units, including component sourcing (we provide the BOM with manufacturer part numbers).
2. NRE, stencil and test-fixture costs, and your DFM review fee if any.
3. Lead time from file approval to shipment, and your QC / functional-test process.
4. Box build (enclosure, cable, packaging) if you offer it.
5. Terms: EXW / FOB Shenzhen or DDP [your city]; payment terms for a first order.

Design files: [link to Gerber, BOM and pick-and-place files].

Best regards,
[your name] · [your company] · [website] · [phone / WhatsApp]
```

**B. 中文版**

```email
主题：基于开源设计文件的PCBA报价 — One-Switch MIDI Instrument，[50]台样机 + [500]台量产

[公司]销售团队，您好：

我是[姓名]，[国家][公司]的创始人。我们正在开发一款One-Switch MIDI Instrument：A tabletop instrument with big faders, encoders and a joystick that any single movement can play, outputting MIDI and built-in synth sound — for music therapy, special-needs schools and inclusive bands。设计基于已公开的开源硬件文件（M5Stack Unit MIDI (U187), M5Stack Unit Synth (U178), M5Stack Unit 8Encoder (U153), M5Stack Unit Fader (U123)；含原理图、PCB和BOM），并做了我们自己的修改。

请报价：
1. [50]台样机和[500 / 1,000]台量产的PCB制板+SMT贴片，含元器件采购（我们提供带厂商料号的BOM）。
2. NRE、钢网和测试治具费用，以及DFM评审费用（如有）。
3. 从文件确认到出货的交期，以及贵司的QC/功能测试流程。
4. 如可提供，整机组装（外壳、线材、包装）报价。
5. 贸易条款：深圳EXW/FOB或DDP到[城市]；首单付款条件。

设计文件：[Gerber、BOM和坐标文件链接]。

祝好，
[姓名] · [公司] · [网站] · [电话 / WhatsApp]
```
<!-- who-to-contact:end -->

## 6. Next steps (this week)
1. Order an ESP32-S3 devkit, Unit Synth, Unit MIDI, Unit 8Encoder, Unit Fader and an arcade joystick; get a quantised scale playing from one fader.
2. Email the national music-therapy association and one inclusive-music charity; recruit 5 therapists for a one-month trial in Q1.
3. Read the Unit Synth datasheet to identify the synth IC and ask a distributor for 2,000-piece lead time; ask a lab for an EMC quote and a written opinion on the Toy Directive.

Want help sourcing or building this? Talk to us via www.gongbans.com.
