Concept, not a product. Concept generated by the GONGBANS inventor from the public catalogue, then expanded into a start pack. Not a product, not validated; every number (market, BOM, price, effort, certification cost) is a rough estimate to be checked, not a quote. Check each board's licence before commercial use. Not legal, tax or investment advice.

New here? Start here → explains what a gongban is, the four steps and the first-timer mistakes. Come back to this pack afterwards.

CategoryMaker tools
Effort (estimate)10 team-weeks
Unit BOM (estimate)€30–45
Price (estimate)€149–199
External market checkLikely
Boards referenced8 catalogue boards

Order of operations: read the summary, then validate demand (section 2) with real customers before you touch the start kit or e-mail anyone in Who to contact (section 5). New to hardware? The zero-experience founder playbook covers validation, samples, the first quote, CE/FCC, customs and fulfilment for all 50 ideas.

1 · Summary · the one-page version

Summary

  • Problem: Open workshops need to know that the person starting the laser cutter has been trained on it, and to log who used what; today that is a sticker, a key cabinet or a per-machine software subscription.
  • Customer: Makerspaces and open workshops, school and university workshops, repair cafés and tool libraries. The space's board, the workshop manager or the university's lab budget pays; the volunteer instructor sets training levels.
  • Product: A box per machine with a card or fingerprint reader, a relay that enables the machine's control circuit, an LED ring and buzzer, a local members-and-training server (FabAccess-compatible) with usage logs and maintenance counters; no per-machine fee. Target price €149–199 (estimate).
  • Why now: FabAccess is being rolled out across ten workshops with public funding, which proves the sector wants machine access control; the commercial option bills per machine, and the catalogue has readers, relays and cores ready.
  • The ask: ~€40–55k to certification and a first 1,000 boxes (estimate); network pre-orders cover a third.

External market check (November 2026): LIKELY. FabAccess is confirmed real and actively funded (a ten-workshop roll-out in 2023–24), a strong sector-wide demand signal. Fabman is a real incumbent but its pricing is unverified. Main risk: Get a Fabman quote before claiming a cost advantage. As researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast. Competitors and sources found: see the market check in the competition table.

2 · Validate demand · before anything else

Validate demand first

Do this before anything else in this pack: before the business plan, before you order a sample board, and long before you e-mail a factory (section 5). The classic first-time mistake is to source and build first and find out later that nobody wanted it. Hardware mistakes are slow and expensive to undo; 15–20 conversations are cheap.

The gate: this idea's kill question

Do 10 makerspaces from one network pre-order 3 boxes each at €169? Pass = 10 orders of 3 in 8 weeks.

You pass this section when you can answer that question with evidence you collected yourself, not a guess: written answers from at least ten decision-makers who hold the budget, at least three of whom put something on paper: a signed letter of intent, a paid pilot, or a dated purchase order for the first units. Until then: no factory e-mail, no sample order, no firmware, no logo. If the answer is no, you have lost a few weeks and saved the rest.

Who you are looking for

The audience named in the idea: Makerspaces and open workshops (Verbund Offener Werkstätten, FabLabs), school and university workshops, repair cafés; the space's board or the workshop manager pays.

The problem as the pack states it: Open workshops need to know that the person starting the laser cutter has been trained on it, and to log who used what; today that is a sticker, a key cabinet or a per-machine software subscription.

Talk to the people who have the problem and the people who pay; in B2B they are often not the same person, and the one who pays decides.

Where to find them

Communities and associations where this audience actually talks, as far as we know them in November 2026. Confirm each is still active and read its rules on self-promotion before posting; most allow a genuine question about a problem and ban a pitch.

  • Verbund Offener Werkstätten (DE) · offene-werkstaetten.org/ — German network of open workshops and makerspaces.
  • hackerspaces.org wiki · wiki.hackerspaces.org/ — directory of makerspaces worldwide; e-mail the ones near you.
  • Hackaday / hackaday.io · hackaday.io/ — maker audience; visibility more than buyers.

Beyond the named ones, the same four methods work for every idea on this site:

  • Search for communities around the problem, not the product: forums, Facebook groups, Discord servers and newsletters in your own country for the terms in the audience line above. Many of the best groups are national and in the local language; a Dutch or German group beats a global English one for an EU launch.
  • Trade associations and their regional meetings for the B2B audiences: one meeting puts twenty buyers in a room, and the association newsletter will often run a short survey for a member.
  • LinkedIn: search people by the job titles in the audience line, message ten a day with one question (not a pitch), and ask for twenty minutes. Expect one in five to say yes.
  • Your deposit list from the kill question and anyone who replied to the fake door: those are the first interviews, not the last.

The plan: 15–20 conversations, then a fake door

  1. 15–20 real conversations (ten budget-holders and ten users), fifteen minutes each, using the script below. Before writing a line of code or ordering a board. Write up each one the same day: the problem in their words, what they do today, what it costs them, what they said when you named the price.
  2. A fake door. One page: the pitch as the headline, a rendered image or a photo of a cardboard mock-up, the price (€149–199, the pack's estimate), and one button. For a business buyer the button is "request a pilot" that leads to a short form and a letter of intent.
  3. Send it to everyone you interviewed and post it, with the problem question first, in the communities above. Run it for two to four weeks.
  4. Count against the kill question. Then decide: go, change the idea, or stop.

Interview script (fifteen minutes, problem first)

Ask, then be quiet. Do not describe the product until question 5; if you pitch first you will only hear politeness.

Pre-order / pilot message (forum post or direct message)

Reading the signal

Real signalFalse positive
A refundable deposit, a signed LOI, a paid pilot, a calendar invite for the prototype"Sounds cool", "I would totally buy that", likes and upvotes
They describe the problem unprompted and in detail, with numbersThey agree with your description of the problem
They have already paid for a workaround (a product, a service, their own time)They have never tried anything and are not bothered
Landing-page conversion to deposit or form above the pack's pass mark, from cold trafficConversion from friends, family and your own network
A named budget and a named decision-maker (B2B)An enthusiastic user who cannot buy

Go / no-go

  • Go to section 3 (business plan) and section 4 (start kit) when the kill question above is met by your own numbers, you have 15–20 written-up conversations, and at least one real signal from the left column per segment you plan to sell to. Only then does section 5 (Who to contact) apply.
  • Change the idea when the problem is real but the price, the buyer or the form factor in the pitch is wrong: the interviews will tell you which. Rewrite the pitch and run the fake door again; this is normal and costs a week.
  • Stop when the kill question fails on honest numbers, or when nobody you talked to has paid for a workaround. Pick another idea on this site; the boards in the start kit are not wasted, only unused.

The full worksheet, with how to define the segment and run the fake door, is in the playbook → validate demand.

3 · Business plan · estimates, not a forecast

Business plan

Problem & customer

Machine access control is the recurring project of every makerspace: FabAccess (offene-werkstaetten.org, a FOSDEM talk, a publicly funded ten-workshop roll-out in 2023–24) shows the sector organising around it; commercial Fabman bills per bridge (pricing unverified; get a quote before claiming a cost advantage). What spaces lack is the box: a finished, certified, pretty unit per machine that a volunteer can install in an hour and that talks to the open server.

Who pays, B2B: the space (membership fees, grants) or the institution; a space buys 5–30 boxes at once. Who uses: every member, so the reader must work with the cards they already have (Mifare, DESFire, student cards).

Market size (estimates — check)

  • TAM: ~2,000 makerspaces and FabLabs in Europe plus school and university workshops; 10–30 machines each. Theoretical €10–20M.
  • SAM: spaces with paid membership or institutional backing: estimate 1,200 × 12 machines → €2.4M.
  • SOM (3 yrs): 6,000–10,000 boxes; year-1: 1,000–1,500 through two networks and a university.

Competition (3 searches, incl. the November 2026 external market check)

AlternativeWhat it is / price foundWhy we still win
FabmanPer-machine bridge with a subscription (pricing unverified)No per-machine fee; open server; get the quote before claiming
FabAccess (open source, funded roll-out)Open access-control software with DIY hardwareWe are the finished box that runs it; compatibility, not competition
MakeACS, MakerCard and similarSmaller access-control projects and productsFinished hardware and support
Key cabinets and stickersFreeNo log, no training check, no maintenance counter

Wedge: the finished box for the open server the sector is already adopting: certified, installer-simple, no per-machine fee.

External market check

Competitors, demand signals and price comparables found by web search in November 2026. Sources are named as found and not linked; as researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast.

Who / sourceWhat it isWhat it tells us
FabAccess (offene-werkstaetten.org, FOSDEM talk)Open access-control project, funded ten-workshop roll-outSector demand; compatibility target
FabmanPer-machine bridge + subscription, pricing unverifiedIncumbent; quote needed
MakeACSAccess-control projectPrecedent

Verdict as researched: LIKELY. Main risk: Get a Fabman quote before claiming a cost advantage.

Product & value proposition

  • Reader: 13.56 MHz (Mifare/DESFire/student cards) or fingerprint; LED ring (red/green/amber), buzzer; relay output for the machine's control circuit (24 V / low-voltage enable), never the motor current.
  • Modes: enable while card present, enable for a session, two-person rule for dangerous machines, instructor override.
  • Server: local (Raspberry Pi class or the space's server), FabAccess-compatible API, members and training levels, usage log, maintenance counters, CSV; no cloud of ours.
  • Install: DIN or wall box, 12–24 V in, two terminals out, one-hour fit by a volunteer with the machine's manual.

Unit economics (estimates, EUR per unit)

Item1k units5k units
Electronics BOM (estimate, mid of €30–45)37.530.0
PCBA assembly + test4.02.6
Enclosure / mechanics (tooling amortised separately)7.04.9
Packaging, cable, leaflet2.51.9
Freight + duty to EU (air at 1k, sea at 5k; check the HS code)3.01.5
Certification amortised (€9k, estimate)9.01.8
Landed cost63.042.7
Channel cost (direct to spaces and networks, ~€15)15.015.0
Net price received (€174 incl. 19% VAT → €146.2 ex VAT)146.2146.2
Gross margin per unit€68.2 (47%)€88.5 (61%)

Lesson: a space buys a dozen at a time; discount the dozen, not the single box. Fingerprint readers raise the BOM; keep them optional.

Go-to-market

First 100 customers:

  1. Ten spaces from one network (Verbund Offener Werkstätten, a FabLab network) pre-ordering three boxes each.
  2. One university workshop as the institutional reference.
  3. Repair cafés and tool libraries for the cheapest variant.

Scale channels: the networks' meetings and mailing lists, FabAccess's community, university procurement frameworks.

12-month plan

QuarterMilestones
Q1Kill-question pre-orders; works-like box on Core2 + RFID2 + Relay with FabAccess; three spaces test.
Q2Custom PCB; enclosure; EVT 30 in three spaces; fingerprint variant.
Q3DVT; certification; 500 boxes; network pre-orders shipped.
Q4University framework; 1,500 boxes; maintenance-counter features.

Team: one embedded engineer, one backend developer close to the FabAccess community, one founder from a makerspace.

Funding to first production (estimates): NRE €14k + certification €8k + first 1,000 boxes landed ~€35k ≈ €57k; minus pre-orders ~€15k ≈ €42k.

Top risks

RiskMitigation
Spaces expect a safety interlockState clearly: control-circuit enable, not a safety function; e-stop stays; installation guide
Fabman turns out cheaper than assumedGet the quote; compete on openness and no fee
Card diversityReader supports the common standards; UID-based enrolment; fingerprint option
Volunteer installations go wrongTwo terminals, clear manual, photos per machine type
4 · Start kit · boards, BOM, build plan, certification

Start kit

Boards to start from

All M5Stack units with published module files; the first boxes can ship on AtomS3 + units in a custom enclosure before a single PCB exists.

Block diagram

  [member card / fingerprint] -> [reader] -> [ESP32 core: check training level] -> [relay] -> machine control circuit (enable)
                                                   |                                  [LED ring, buzzer]
                                            WiFi -> [local server: members, levels, logs, maintenance counters]  (FabAccess-compatible)

Starter BOM (estimates)

PartEst. € (1k)Note
13.56 MHz reader module4.0
ESP32-S3 module2.5
Relay (control circuit rating)2.0
LED ring + buzzer2.5
Enclosure (DIN/wall) + terminals8.0
PCB, 12–24 V input, passives4.0
Fingerprint module (option)+12.0optional

Firmware/software starting point

  • ESP-IDF; reader driver; offline cache of allowed UIDs per machine; session logic; relay watchdog; LED/buzzer feedback.
  • Server: FabAccess-compatible API or FabAccess itself; admin UI for training levels; logs; CSV.

12-week build plan

  1. Pre-orders live; interviews with three space managers
  2. Prototype box
  3. FabAccess integration
  4. Enclosure
  5. Custom PCB v1
  6. Fingerprint option
  7. EVT 30 in three spaces
  8. Installer manual with photos
  9. Tooling decision
  10. DVT
  11. Pre-compliance
  12. Certification; shipping

Certification checklist (EU)

  • RED via the module's own radio reports (EN 300 328 / EN 300 220 as applicable, EN 301 489 EMC), EN 18031 cybersecurity for the connected variant, EN 62368-1 safety (USB-powered, no mains inside), RoHS/REACH, WEEE registration per country, CRA vulnerability-handling process.
  • Test with the DVT build in the real enclosure; budget a re-spin for EMC.
  • Lab cost: a few thousand euros for a USB-powered device with a pre-certified module, more with battery or multiple radios (estimate; get two quotes).

Validation toolkit

  • Kill question: Do 10 makerspaces from one network pre-order 3 boxes each at €169? Pass = 10 orders of 3 in 8 weeks.
  • Cheapest experiment: Three prototype boxes on three machines of one makerspace for a month; ask the board whether they would buy twelve at €169.
  • 5-question interview: 1) How do you control who uses the laser cutter today? 2) Have you looked at Fabman or built your own; what happened? 3) Who pays for equipment and how much per year? 4) What cards do your members carry? 5) At €169 per machine with no fee, how many machines?
  • Landing page: headline "Only trained hands start the machine." Bullets: your cards, your server, usage log, €169 per machine, no fee. Button: pre-order 3 (refundable deposit).
  • Pass threshold: 10 orders of 3 within 8 weeks.

First production checklist

  • 10 golden samples measured and photographed; one per enclosure colour.
  • DFM review with the PCBA house: test pads, programming jig, serial/MAC provisioning, who holds the signing keys (you).
  • MOQ talk: module, enclosure, packaging; get the next price break in writing.
  • QC: AQL II 2.5/4.0; 100% functional test incl. radio; burn-in sample.
  • Packaging and label: CE, WEEE bin, responsible-person address, model/serial; manual with safety and disposal text.
  • Incoterm and shipping: DDP by courier for the first run; forwarder quote for the second.
5 · Who to contact · from gongban.db

Who to contact

On file: 1 board publisher (M5Stack). Only useful once section 2 (validate demand) has passed. Everything below comes from gongban.db, the directory behind this site. It names the companies that publish the boards this idea is built from, the manufacturers on file, and directory entries in the same product category. None of it is a verified supplier relationship for this specific idea: nobody has quoted it yet. Company websites only; no personal contacts are published.

Board publishers (direct)

Manufacturing (PCBA / EMS) on file

  • Kingbrother / King Brother Technology · global.kingbrother.com/ — PCB fab + EMS; see the Kingbrother SOM page on this site.
  • Foxlink (SZ) (正崴精密工业(深圳)有限公司) · foxconn.com — PCBA + cable assembly EMS: Cable assembly; PCBA; connector; OEM for major electronics brands.

Also in the directory (category match, not idea-specific)

Companies in the gongban.db solution-house directory whose product category overlaps this idea. They were matched on the idea's tags, not on this design; none has seen it.

  • AI-Thinker (安信可科技(深圳)有限公司) · ai-thinker.com — ESP8266 / ESP32 module OEM: ESP-01; ESP32-CAM; A9 GSM modules; massive community. (ESP32 / ESP8266 modules)
  • Newland (SZ) (新大陆(深圳)科技有限公司) · newlandaidc.com — Barcode / RFID / POS terminal: Barcode scanner; NFC reader; POS terminal; RFID reader. (NFC / RFID readers)
  • Szrfid Technology (深圳市新中讯网络技术有限公司) · szrfid.com — RFID reader / UHF solution house: UHF RFID reader; RFID module; OEM/ODM for logistics + retail + access. (NFC / RFID readers)

MOQ and landed cost

gongban.db holds no MOQ, unit-price or tariff data for these companies, so none is shown. Get the numbers from the quote (the e-mail below asks for them) and run them through the landed-cost worksheet in the playbook. The starter BOM in the start kit section is an estimate, not a quote.

Outreach e-mail, ready to send

Fill in the [brackets], keep it short, and send it to the sales or "contact us" address on the company's own website. The Chinese version is the same letter; sending both in one mail is normal. How to read the reply: playbook → the first quote.

A. To a board publisher — samples and volume price (send to the sales / "contact us" address on the M5Stack website)

A. 中文版

B. To a PCBA / EMS house — quote from the open design files (send to Kingbrother, Foxlink or any assembler you vet; see the playbook)

B. 中文版

6 · Next steps · this week

Next steps (this week)

  1. Run section 2 (validate demand): book the first ten conversations and put the fake door up before touching a board.
  2. Order the sample boards in the start kit (three of each) and build the works-like prototype on the desk.
  3. Send e-mail A to the board publisher and e-mail B to one PCBA house (section on who to contact) to learn the real numbers behind the estimates above.
Get this built

Want this built?

Get sourcing and manufacturing help from a team in Shenzhen and Europe.

Never built hardware? Start with the zero-experience founder playbook: samples, the first quote, CE/FCC, customs, logistics and the kill question, in order. Board facts come from the catalogue; everything else in this pack is an estimate.

Get this built →

Start pack machine-access-box · written by the GONGBANS inventor from the public catalogue and public sources. Concept generated by the GONGBANS inventor from the public catalogue, then expanded into a start pack. Not a product, not validated; every number (market, BOM, price, effort, certification cost) is a rough estimate to be checked, not a quote. Check each board's licence before commercial use. Not legal, tax or investment advice. Idea page · Download as Markdown · All 50 start packs →