Summary
- Problem: Home potters firing a small electric kiln either babysit a manual kiln-sitter or pay $388–699 for a replacement controller sold through dealers; the ones who want a log and a phone notification have to build it.
- Customer: Individual hobbyist potters with a kiln at home. Not schools, colleges or commercial studios: research found that non-listed controllers are implicated in insurance disputes, so institutions must buy a listed controller, and this pack says so.
- Product: A retrofit controller box with an isolated thermocouple input, phone programme editor over local WiFi, cone presets, a pilot output to the kiln's existing contactor fitted by a technician, watchdogs, a buzzer and a firing log; sold with an installer note and a clear scope statement. Target price €249–349 (estimate).
- Why now: Hobby kilns are booming with the ceramics revival, the replacement controllers cost $388–699 and are sold through dealers, the catalogue has an isolated thermocouple input and a DIN controller ready, and the research confirmed the insurance problem that keeps this a hobbyist product.
- The ask: ~€55–70k to certification and a first 500 units (estimate); the certification line is the big one.
External market check (November 2026): UNCERTAIN. The price gap is real (Skutt KMT kit $579–650, Bartlett Genesis 2.0 $388–699 against the €249–349 target), but an independent source (the Digitalfire community) confirms DIY kiln controllers are not CSA/UL listed and are implicated in fire-insurance disputes, a real threat to institutional sales regardless of price. Main risk: Scoped before building to individual hobbyist potters only; schools and studios are excluded in the pack text until a listed version exists. As researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast. Competitors and sources found: see the market check in the competition table.
Built with the research fix applied (November 2026). The research found that non-listed kiln controllers are implicated in fire-insurance disputes, which rules out schools, colleges and commercial studios as buyers regardless of price. This pack is therefore scoped to individual hobbyist potters, sold installer-fitted and certified as a mains temperature controller, with the scope stated on the landing page and in the box. As researched November 2026 by web search; verify before relying on it.
Validate demand first
Do this before anything else in this pack: before the business plan, before you order a sample board, and long before you e-mail a factory (section 5). The classic first-time mistake is to source and build first and find out later that nobody wanted it. Hardware mistakes are slow and expensive to undo; 15–20 conversations are cheap.
The gate: this idea's kill question
Do 10 individual hobbyist potters (not schools or studios) buy at €299 after seeing one logged firing on a kiln like theirs, and does a kiln repair technician agree to fit it? Pass = 10 orders and 1 installer in 8 weeks.
You pass this section when you can answer that question with evidence you collected yourself, not a guess: a fake-door landing page that individual hobbyist potters with a small electric kiln at home, kiln repair technicians as installers actually visited, with a measured conversion to a waitlist or refundable deposit, plus the interview notes behind it. Until then: no factory e-mail, no sample order, no firmware, no logo. If the answer is no, you have lost a few weeks and saved the rest.
Who you are looking for
The audience named in the idea: Individual hobbyist potters with a small electric kiln at home (DE/UK/NL/Nordics), kiln repair technicians as installers; explicitly not schools, colleges or commercial studios, where insurance terms rule out non-listed controllers.
The problem as the pack states it: Home potters firing a small electric kiln either babysit a manual kiln-sitter or pay $388–699 for a replacement controller sold through dealers; the ones who want a log and a phone notification have to build it.
Talk to the people who have the problem and the people who pay; in B2B they are often not the same person, and the one who pays decides.
Where to find them
Communities and associations where this audience actually talks, as far as we know them in November 2026. Confirm each is still active and read its rules on self-promotion before posting; most allow a genuine question about a problem and ban a pitch.
- r/Pottery · reddit.com/r/Pottery/ — hobby potters, many with a home kiln.
- Digitalfire · digitalfire.com/ — ceramics reference and community; the source on controller safety and insurance.
Beyond the named ones, the same four methods work for every idea on this site:
- Search for communities around the problem, not the product: forums, Facebook groups, Discord servers and newsletters in your own country for the terms in the audience line above. Many of the best groups are national and in the local language; a Dutch or German group beats a global English one for an EU launch.
- Trade associations and their regional meetings for the B2B audiences: one meeting puts twenty buyers in a room, and the association newsletter will often run a short survey for a member.
- LinkedIn: search people by the job titles in the audience line, message ten a day with one question (not a pitch), and ask for twenty minutes. Expect one in five to say yes.
- Your deposit list from the kill question and anyone who replied to the fake door: those are the first interviews, not the last.
The plan: 15–20 conversations, then a fake door
- 15–20 real conversations (twenty people from the audience line), fifteen minutes each, using the script below. Before writing a line of code or ordering a board. Write up each one the same day: the problem in their words, what they do today, what it costs them, what they said when you named the price.
- A fake door. One page: the pitch as the headline, a rendered image or a photo of a cardboard mock-up, the price (€249–349, the pack's estimate), and one button. For a consumer the button takes a refundable deposit or a waitlist e-mail; a deposit is worth ten e-mails.
- Send it to everyone you interviewed and post it, with the problem question first, in the communities above. Run it for two to four weeks.
- Count against the kill question. Then decide: go, change the idea, or stop.
Interview script (fifteen minutes, problem first)
Ask, then be quiet. Do not describe the product until question 5; if you pitch first you will only hear politeness.
Thanks for the time. I am looking into how individual hobbyist potters with a small electric kiln at home, kiln repair technicians as installers deal with [the problem in their words]; I have not built anything yet and I am trying to find out whether it is worth building.
1. Tell me about your kiln: how do you set a firing, how do you know it is done, and what was your last ruined firing?
2. What do you do about it today, and what does that cost you in money or time per month?
3. What have you already tried or bought, and why did you stop using it?
4. If this went away tomorrow, what would change for you? (If the answer is "not much", you have your answer.)
5. [Only now describe it in one sentence:] A retrofit controller and logger for the home potter's small electric kiln: ramp-and-hold programmes, a phone notification when the firing is done, and a log of every firing, for individual hobbyists, not schools or studios. On a scale of one to ten, how likely would you be to buy that at €249–349, and what would make it a ten?
6. Who else should I talk to about this? (Ask for two names.)
Close: "If I build this, can I come back to you with a prototype?" A yes with a calendar date is worth more than any compliment.
Pre-order / pilot message (forum post or direct message)
Subject: Kiln Mind: would you pay €249–349 for this? Looking for 20 people to tell me I am wrong
I am [your name], [your background]. I am considering building a Kiln Mind: A retrofit controller and logger for the home potter's small electric kiln: ramp-and-hold programmes, a phone notification when the firing is done, and a log of every firing, for individual hobbyists, not schools or studios. Before I order a single part I want to know whether this is a real problem for people like you or only in my head.
If you would want one at €249–349, the page at [link] takes a fully refundable €[10–20] deposit (or a waitlist e-mail if you prefer); if twenty people do that, I build it, if not, everyone gets their money back and I have learned something.
Either way, two questions: how do you deal with this today, and what would make you say no? Honest answers are worth more to me than deposits.
Reading the signal
| Real signal | False positive |
|---|---|
| A refundable deposit, a signed LOI, a paid pilot, a calendar invite for the prototype | "Sounds cool", "I would totally buy that", likes and upvotes |
| They describe the problem unprompted and in detail, with numbers | They agree with your description of the problem |
| They have already paid for a workaround (a product, a service, their own time) | They have never tried anything and are not bothered |
| Landing-page conversion to deposit or form above the pack's pass mark, from cold traffic | Conversion from friends, family and your own network |
| A named budget and a named decision-maker (B2B) | An enthusiastic user who cannot buy |
Go / no-go
- Go to section 3 (business plan) and section 4 (start kit) when the kill question above is met by your own numbers, you have 15–20 written-up conversations, and at least one real signal from the left column per segment you plan to sell to. Only then does section 5 (Who to contact) apply.
- Change the idea when the problem is real but the price, the buyer or the form factor in the pitch is wrong: the interviews will tell you which. Rewrite the pitch and run the fake door again; this is normal and costs a week.
- Stop when the kill question fails on honest numbers, or when nobody you talked to has paid for a workaround. Pick another idea on this site; the boards in the start kit are not wasted, only unused.
The full worksheet, with how to define the segment and run the fake door, is in the playbook → validate demand.
Business plan
Problem & customer
A kiln firing is a ten-hour ramp-and-hold profile; getting it right decides the result, and knowing it has finished decides whether you sleep. Replacement controllers from Skutt and Bartlett cost $388–699 and are sold and fitted through dealers; the DIY alternatives on forums work but are explicitly not listed for safety, and the Digitalfire community notes that such controllers are implicated in fire-insurance disputes. That settles the market: a safety-certified, installer-fitted controller for the individual hobbyist, scoped away from institutions whose insurers require listed equipment.
Who pays: the hobbyist potter (B2C), typically after the second kiln or the first ruined glaze firing; the kiln repair technician who fits it is the channel. Who does not: schools and studios, by design, until a listed version exists.
Market size (estimates — check)
- TAM: hobby electric kilns in private hands in the EU: estimate 150,000–300,000. Theoretical €50–90M.
- SAM: owners of manual or ageing controllers who follow pottery communities online: estimate 50,000 → €15M.
- SOM (3 yrs): 3,000–5,000 units through communities and technicians; year-1: 400–600.
Competition (3 searches, incl. the November 2026 external market check)
| Alternative | What it is / price found | Why we still win |
|---|---|---|
| Skutt KilnMaster (KMT) kit | $579–650 (research, Nov 2026) | Half the price, with the log and the notification |
| Bartlett Genesis 2.0 | $388–699 replacement controller | Similar to lower price; local WiFi and log included |
| Nabertherm and kiln-maker controllers | Bundled with new kilns, quote-based | Different purchase moment |
| DIY PID / Arduino kiln controllers | Forum builds, not listed | We are certified and installer-fitted; same price class as the parts plus a weekend |
Wedge: a certified, installer-fitted controller with the log and the phone notification, at or below the replacement-controller price, sold honestly to hobbyists only.
External market check
Competitors, demand signals and price comparables found by web search in November 2026. Sources are named as found and not linked; as researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast.
| Who / source | What it is | What it tells us |
|---|---|---|
| Skutt KilnMaster (KMT) kit | $579–650 | Incumbent, about double the target |
| Bartlett Genesis 2.0 | $388–699 | Incumbent, similar to higher price |
| Digitalfire community on DIY controllers | Not CSA/UL listed; implicated in insurance disputes | Rules out institutional buyers; scope fixed |
Verdict as researched: UNCERTAIN. Main risk: Scoped before building to individual hobbyist potters only; schools and studios are excluded in the pack text until a listed version exists.
Product & value proposition
- Isolated K-type (and S-type option) input; 0–1,300 °C; cone tables; ramp/hold editor on a phone over local WiFi; no cloud.
- Pilot output (SSR or relay) to the kiln's existing contactor; the controller never carries the element current.
- Watchdogs: over-temperature, thermocouple break, stuck-relay detection (temperature rising with output off), maximum firing time; mains-independent buzzer.
- Firing log with the full curve, exportable; notification by e-mail or local push when done or faulted.
- Installer note and a scope statement in the box: for private hobby kilns; institutions require a listed controller.
Unit economics (estimates, EUR per unit)
| Item | 1k units | 5k units |
|---|---|---|
| Electronics BOM (estimate, mid of €45–70) | 57.5 | 46.0 |
| PCBA assembly + test | 6.0 | 3.9 |
| Enclosure / mechanics (tooling amortised separately) | 10.0 | 7.0 |
| Packaging, cable, leaflet | 3.0 | 2.2 |
| Freight + duty to EU (air at 1k, sea at 5k; check the HS code) | 4.0 | 2.0 |
| Certification amortised (€18k, estimate) | 18.0 | 3.6 |
| Landed cost | 98.5 | 64.8 |
| Channel cost (direct and technician channel, ~€25) | 25.0 | 25.0 |
| Net price received (€299 incl. 19% VAT → €251.3 ex VAT) | 251.3 | 251.3 |
| Gross margin per unit | €127.8 (51%) | €161.5 (64%) |
Lesson: certification dominates the first run (a mains-connected temperature controller is tested to a demanding standard); at 1k units the product barely breaks even, at 5k it works. Do not launch without the certification quote in hand.
Go-to-market
First 100 customers:
- Ten hobbyists from pottery communities who send a video of their kiln and their last firing problem.
- Two kiln repair technicians who fit it and recommend it.
- Pottery supply shops' hobby customers.
Scale channels: kiln technicians, pottery supply shops, ceramics communities and courses.
12-month plan
| Quarter | Milestones |
|---|---|
| Q1 | Kill-question conversations; works-like controller on KMeter-ISO + StamPLC driving a contactor on a technician's bench kiln; certification quotes from two labs. |
| Q2 | Custom board; enclosure; EVT 10 with hobbyists and a technician; watchdog tests. |
| Q3 | DVT; certification (the long pole); 200 units. |
| Q4 | Technician network; 500 units; S-type input option. |
Team: one embedded engineer with functional-safety instincts, one founder from the ceramics world; a technician partner.
Funding to first production (estimates): NRE €20k + certification €15–20k + first 500 units landed ~€30k ≈ €70k; minus pre-orders ~€10k ≈ €60k.
Top risks
| Risk | Mitigation |
|---|---|
| Insurance and liability if a kiln is damaged | Scope to hobbyists; installer-fitted; watchdogs; written scope statement; product liability insurance priced in |
| Certification cost and time for a mains temperature controller | Quote before building; design to the standard from day one |
| Hobbyists happy with a kiln-sitter | Sell the log and the notification; target owners who ruined a firing |
| Technicians prefer dealer controllers | Margin for the installer; simple fitting |
Start kit
Boards to start from
- M5Stack Unit KMeter-ISO (U133-V11) — isolated K-type thermocouple input for the kiln probe (design files published for the module; electronics not open)
- M5Stack StamPLC (K141) — DIN-rail PLC-style controller core (design files published for the module; electronics not open)
- M5Stack StamPLC AC (A160) — mains-powered StamPLC variant (design files published for the module; electronics not open)
- Seeed Grove-Solid State Relay V2 — pilot-signal SSR reference; the kiln load goes through an external contactor (open files: schematic)
- M5Stack Unit Buzzer (U132) — end-of-firing and fault alarm (design files published for the module; electronics not open)
The KMeter-ISO is the isolated thermocouple front end; the StamPLC family provides the DIN-rail controller; the Seeed SSR board (open schematic) is the pilot-output reference. The kiln contactor is bought and fitted by the technician.
Block diagram
[K-type thermocouple] -> [KMeter-ISO, isolated] -> [StamPLC controller] -> pilot -> [kiln's own contactor] -> elements
| watchdogs: over-temp, TC break, stuck relay, max time
[phone, local WiFi: programmes, log] [buzzer, mains-independent]
Starter BOM (estimates)
| Part | Est. € (1k) | Note |
|---|---|---|
| Isolated thermocouple input (MAX31855-class + isolation) | 6.0 | |
| ESP32-S3 controller board (StamPLC-class) | 12.0 | |
| SSR / relay pilot output | 4.0 | contactor external |
| Power supply (mains to 5 V, certified module) | 6.0 | |
| Enclosure, DIN clips, terminals | 12.0 | |
| Buzzer, display, PCB, passives | 8.0 |
Firmware/software starting point
- ESP-IDF; PID with ramp/hold scheduler; cone tables; watchdogs in a separate task with hardware output disable.
- Local web app for programmes and logs; MQTT optional; e-mail / local push when done.
- Logging of every firing to flash with export.
12-week build plan
- Interviews with hobbyists and a technician; fake door
- Prototype on bench kiln
- Watchdog design and tests
- Certification quotes and standard study
- Custom board v1
- Enclosure
- EVT 10 with hobbyists
- Firing logs reviewed
- Design freeze for the lab
- DVT
- Pre-compliance and safety tests
- Certification submission
Certification checklist (EU)
- Everything in the standard list (RED if radio, EMC, RoHS/REACH, WEEE, CRA) plus LVD / EN 62368-1 or EN 60730-1 for a mains-connected control device; the switched load goes through an installer-fitted contactor or SSR rated for it, never through the box's own relay above its rating.
- Installer-fitted product: write the installation manual for an electrician, not a consumer; label the box accordingly.
- Budget the lab at the high end (estimate; get two quotes) and allow one re-spin.
Validation toolkit
- Kill question: Do 10 individual hobbyist potters (not schools or studios) buy at €299 after seeing one logged firing on a kiln like theirs, and does a kiln repair technician agree to fit it? Pass = 10 orders and 1 installer in 8 weeks.
- Cheapest experiment: Fit the prototype to one technician's bench kiln, log three firings, and show the log to ten hobbyists with a €299 price; ask who orders.
- 5-question interview: 1) Tell me about your kiln and your last ruined firing. 2) How do you know when it is done today? 3) Have you priced a replacement controller; what stopped you? 4) Who services your kiln? 5) At €299 fitted by your technician, would you order?
- Landing page: headline "Your kiln, programmed from the sofa, logged forever. For home potters." Bullets: fitted by your kiln technician; watchdogs; €299; not for schools or studios (listed controllers required). Button: refundable €30 deposit.
- Pass threshold: 10 hobbyist orders and one technician agreement within 8 weeks.
First production checklist
- 10 golden samples measured and photographed; one per enclosure colour.
- DFM review with the PCBA house: test pads, programming jig, serial/MAC provisioning, who holds the signing keys (you).
- MOQ talk: module, enclosure, packaging; get the next price break in writing.
- QC: AQL II 2.5/4.0; 100% functional test incl. radio; burn-in sample.
- Packaging and label: CE, WEEE bin, responsible-person address, model/serial; manual with safety and disposal text.
- Incoterm and shipping: DDP by courier for the first run; forwarder quote for the second.
- Safety: 100% hi-pot and functional watchdog test on the line; installer note in every box.
Who to contact
On file: 2 board publishers (M5Stack and Seeed Studio). Only useful once section 2 (validate demand) has passed. Everything below comes from gongban.db, the directory behind this site. It names the companies that publish the boards this idea is built from, the manufacturers on file, and directory entries in the same product category. None of it is a verified supplier relationship for this specific idea: nobody has quoted it yet. Company websites only; no personal contacts are published.
Board publishers (direct)
- M5Stack — community / maker brand; 274 boards in the catalogue; files via M5Stack M5_Hardware repo · github.com/m5stack/M5_Hardware. Boards used here: M5Stack Unit KMeter-ISO (U133-V11) (isolated K-type thermocouple input for the kiln probe); M5Stack StamPLC (K141) (DIN-rail PLC-style controller core); M5Stack StamPLC AC (A160) (mains-powered StamPLC variant); M5Stack Unit Buzzer (U132) (end-of-firing and fault alarm). What to ask for: sample units of the SKUs above, unit pricing at 100 / 500 / 1,000, whether a customised variant is possible (and its NRE and MOQ), and the module's radio test reports if any.
- Seeed Studio (矽递科技(深圳)有限公司, seeedstudio.com) — community / maker brand; 183 boards in the catalogue; files via Seeed Studio wiki catalog · github.com/Seeed-Studio/wiki-documents. Directory entry: IoT module + open hardware OEM: XIAO ESP32S3; Grove modules; LoRa gateway; Jetson carrier; OEM PCBA. Boards used here: Seeed Grove-Solid State Relay V2 (pilot-signal SSR reference; the kiln load goes through an external contactor). What to ask for: sample units of the SKUs above, unit pricing at 100 / 500 / 1,000, whether a customised variant is possible (and its NRE and MOQ), and the module's radio test reports if any.
Manufacturing (PCBA / EMS) on file
- Kingbrother / King Brother Technology · global.kingbrother.com/ — PCB fab + EMS; see the Kingbrother SOM page on this site.
- Foxlink (SZ) (正崴精密工业(深圳)有限公司) · foxconn.com — PCBA + cable assembly EMS: Cable assembly; PCBA; connector; OEM for major electronics brands.
Also in the directory (category match, not idea-specific)
Companies in the gongban.db solution-house directory whose product category overlaps this idea. They were matched on the idea's tags, not on this design; none has seen it.
- AI-Thinker (安信可科技(深圳)有限公司) · ai-thinker.com — ESP8266 / ESP32 module OEM: ESP-01; ESP32-CAM; A9 GSM modules; massive community. (ESP32 / ESP8266 modules)
MOQ and landed cost
gongban.db holds no MOQ, unit-price or tariff data for these companies, so none is shown. Get the numbers from the quote (the e-mail below asks for them) and run them through the landed-cost worksheet in the playbook. The starter BOM in the start kit section is an estimate, not a quote.
Outreach e-mail, ready to send
Fill in the [brackets], keep it short, and send it to the sales or "contact us" address on the company's own website. The Chinese version is the same letter; sending both in one mail is normal. How to read the reply: playbook → the first quote.
A. To a board publisher — samples and volume price (send to the sales / "contact us" address on the M5Stack and Seeed Studio websites)
Subject: Sample order and volume pricing — M5Stack Unit KMeter-ISO (U133-V11), M5Stack StamPLC (K141), M5Stack StamPLC AC (A160), M5Stack Unit Buzzer (U132), Seeed Grove-Solid State Relay V2 — for a Kiln Mind
Hello [company] sales team,
I am [your name], founder of [your company] in [country]. We are developing a Kiln Mind: A retrofit controller and logger for the home potter's small electric kiln: ramp-and-hold programmes, a phone notification when the firing is done, and a log of every firing, for individual hobbyists, not schools or studios. The design is built around your M5Stack Unit KMeter-ISO (U133-V11), M5Stack StamPLC (K141), M5Stack StamPLC AC (A160), M5Stack Unit Buzzer (U132), Seeed Grove-Solid State Relay V2.
Could you please send:
1. Price and lead time for [10] sample units of each: M5Stack Unit KMeter-ISO (U133-V11), M5Stack StamPLC (K141), M5Stack StamPLC AC (A160), M5Stack Unit Buzzer (U132), Seeed Grove-Solid State Relay V2.
2. Unit pricing at 100 / 500 / 1,000 pieces, EXW Shenzhen and DDP [your city], including packaging.
3. Whether a customised variant is possible (our enclosure, connector, or firmware pre-loaded), with the NRE and MOQ for it.
4. Radio test reports or module certification documents, if available, so we can plan EU (CE/RED) certification.
5. Payment terms and accepted methods for a first order.
We can share our block diagram and target quantities under NDA if that helps.
Best regards,
[your name] · [your company] · [website] · [phone / WhatsApp]
A. 中文版
主题:样品订购及批量报价 — M5Stack Unit KMeter-ISO (U133-V11), M5Stack StamPLC (K141), M5Stack StamPLC AC (A160), M5Stack Unit Buzzer (U132), Seeed Grove-Solid State Relay V2 — 用于Kiln Mind
[公司]销售团队,您好:
我是[姓名],[国家][公司]的创始人。我们正在开发一款Kiln Mind:A retrofit controller and logger for the home potter's small electric kiln: ramp-and-hold programmes, a phone notification when the firing is done, and a log of every firing, for individual hobbyists, not schools or studios。产品设计基于贵司的M5Stack Unit KMeter-ISO (U133-V11), M5Stack StamPLC (K141), M5Stack StamPLC AC (A160), M5Stack Unit Buzzer (U132), Seeed Grove-Solid State Relay V2。
请提供以下信息:
1. 各[10]片样品的单价和交期:M5Stack Unit KMeter-ISO (U133-V11), M5Stack StamPLC (K141), M5Stack StamPLC AC (A160), M5Stack Unit Buzzer (U132), Seeed Grove-Solid State Relay V2。
2. 100 / 500 / 1,000 片的批量单价(深圳EXW及DDP到[城市]),含包装。
3. 是否可以定制(外壳、接口或预烧录固件),以及定制的NRE费用和最小起订量(MOQ)。
4. 如有,请提供射频测试报告或模组认证文件,以便我们规划欧盟CE/RED认证。
5. 首单的付款方式和条件。
如有需要,我们可在签署NDA后提供框图和目标数量。
祝好,
[姓名] · [公司] · [网站] · [电话 / WhatsApp]
B. To a PCBA / EMS house — quote from the open design files (send to Kingbrother, Foxlink or any assembler you vet; see the playbook)
Subject: PCBA quote from open design files — Kiln Mind, [50] prototypes + [500] production units
Hello [company] sales team,
I am [your name], founder of [your company] in [country]. We are building a Kiln Mind: A retrofit controller and logger for the home potter's small electric kiln: ramp-and-hold programmes, a phone notification when the firing is done, and a log of every firing, for individual hobbyists, not schools or studios. The design starts from published open-hardware files (M5Stack Unit KMeter-ISO (U133-V11), M5Stack StamPLC (K141), M5Stack StamPLC AC (A160), M5Stack Unit Buzzer (U132), Seeed Grove-Solid State Relay V2; schematic, PCB and BOM available) with our own modifications.
Could you quote:
1. PCB fabrication + SMT assembly for [50] prototype units and [500 / 1,000] production units, including component sourcing (we provide the BOM with manufacturer part numbers).
2. NRE, stencil and test-fixture costs, and your DFM review fee if any.
3. Lead time from file approval to shipment, and your QC / functional-test process.
4. Box build (enclosure, cable, packaging) if you offer it.
5. Terms: EXW / FOB Shenzhen or DDP [your city]; payment terms for a first order.
Design files: [link to Gerber, BOM and pick-and-place files].
Best regards,
[your name] · [your company] · [website] · [phone / WhatsApp]
B. 中文版
主题:基于开源设计文件的PCBA报价 — Kiln Mind,[50]台样机 + [500]台量产
[公司]销售团队,您好:
我是[姓名],[国家][公司]的创始人。我们正在开发一款Kiln Mind:A retrofit controller and logger for the home potter's small electric kiln: ramp-and-hold programmes, a phone notification when the firing is done, and a log of every firing, for individual hobbyists, not schools or studios。设计基于已公开的开源硬件文件(M5Stack Unit KMeter-ISO (U133-V11), M5Stack StamPLC (K141), M5Stack StamPLC AC (A160), M5Stack Unit Buzzer (U132), Seeed Grove-Solid State Relay V2;含原理图、PCB和BOM),并做了我们自己的修改。
请报价:
1. [50]台样机和[500 / 1,000]台量产的PCB制板+SMT贴片,含元器件采购(我们提供带厂商料号的BOM)。
2. NRE、钢网和测试治具费用,以及DFM评审费用(如有)。
3. 从文件确认到出货的交期,以及贵司的QC/功能测试流程。
4. 如可提供,整机组装(外壳、线材、包装)报价。
5. 贸易条款:深圳EXW/FOB或DDP到[城市];首单付款条件。
设计文件:[Gerber、BOM和坐标文件链接]。
祝好,
[姓名] · [公司] · [网站] · [电话 / WhatsApp]
Next steps (this week)
- Run section 2 (validate demand): book the first ten conversations and put the fake door up before touching a board.
- Order the sample boards in the start kit (three of each) and build the works-like prototype on the desk.
- Send e-mail A to the board publisher and e-mail B to one PCBA house (section on who to contact) to learn the real numbers behind the estimates above.