Concept, not a product. Concept generated by the GONGBANS inventor from the public catalogue, then expanded into a start pack. Not a product, not validated; every number (market, BOM, price, effort, certification cost) is a rough estimate to be checked, not a quote. Check each board's licence before commercial use. Not legal, tax or investment advice.

New here? Start here → explains what a gongban is, the four steps and the first-timer mistakes. Come back to this pack afterwards.

Effort (estimate)14–18 team-weeks
Unit BOM (estimate)€40–60
Price (estimate)€199–299
External market checkLikely
Boards referenced4 catalogue boards

Order of operations: read the summary, then validate demand (section 2) with real customers before you touch the start kit or e-mail anyone in Who to contact (section 5). New to hardware? The zero-experience founder playbook covers validation, samples, the first quote, CE/FCC, customs and fulfilment for all 50 ideas.

1 · Summary · the one-page version

Summary

  • Problem: Millions of perfectly good lithium cells go to the shredder every year because nobody outside a battery plant can grade them cheaply and repeatably. The €25 four-slot "capacity testers" from marketplaces give random internal-resistance numbers; the industrial cyclers start at a few thousand euros and need a lab.
  • Customer: Battery-pack rebuilders, repair cafés and repair shops, e-waste handlers with a reuse line, and DIY solar-storage builders across the EU. The shop owner or the association pays; the volunteer or technician uses it.
  • Product: A €249 four-slot cycler: charge, discharge at a defined current, DC and 1 kHz-class IR, a 7-day self-discharge mode, per-slot temperature cut-off, a grade (A/B/C/scrap) printed on a label, CSV export so matched cells go into one pack.
  • Why now: The EU Battery Regulation (2023/1542) explicitly covers repurposed and remanufactured batteries and pushes reuse; right-to-repair makes pack rebuilding a legal trade; the measurement chips (INA226-class) and open charge-path boards are commodity.
  • The ask: ~€95k (estimate) to the first 1,000 units; route = deposits from rebuilders and repair-café networks + bootstrap, with a circular-economy grant as the upside.

External market check (November 2026): LIKELY. Dedicated 18650/21700 testers already exist commercially (ZB206+, generic capacity and internal-resistance testers), confirming the technology is real and buildable, but no evidence was found of repair cafés or rebuild shops actively seeking grading tools. Main risk: Demand is unverified rather than contradicted; the kill question's fifteen commitments are the test. As researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast. Competitors and sources found: see the market check in the competition table.

2 · Validate demand · before anything else

Validate demand first

Do this before anything else in this pack: before the business plan, before you order a sample board, and long before you e-mail a factory (section 5). The classic first-time mistake is to source and build first and find out later that nobody wanted it. Hardware mistakes are slow and expensive to undo; 15–20 conversations are cheap.

The gate: this idea's kill question

Do 15 repair cafés or rebuilders in one country commit to buy at €249 after a video of a 4-slot grade run?

You pass this section when you can answer that question with evidence you collected yourself, not a guess: written answers from at least ten decision-makers who hold the budget, at least three of whom put something on paper: a signed letter of intent, a paid pilot, or a dated purchase order for the first units. Until then: no factory e-mail, no sample order, no firmware, no logo. If the answer is no, you have lost a few weeks and saved the rest.

Who you are looking for

The audience named in the idea: Repair cafés, e-waste recyclers, battery-pack rebuilders and DIY solar-storage builders across the EU.

The problem as the pack states it: Millions of perfectly good lithium cells go to the shredder every year because nobody outside a battery plant can grade them cheaply and repeatably. The €25 four-slot "capacity testers" from marketplaces give random internal-resistance numbers; the industrial cyclers start at a few thousand euros and need a lab.

Talk to the people who have the problem and the people who pay; in B2B they are often not the same person, and the one who pays decides.

Where to find them

Communities and associations where this audience actually talks, as far as we know them in November 2026. Confirm each is still active and read its rules on self-promotion before posting; most allow a genuine question about a problem and ban a pitch.

Beyond the named ones, the same four methods work for every idea on this site:

  • Search for communities around the problem, not the product: forums, Facebook groups, Discord servers and newsletters in your own country for the terms in the audience line above. Many of the best groups are national and in the local language; a Dutch or German group beats a global English one for an EU launch.
  • Trade associations and their regional meetings for the B2B audiences: one meeting puts twenty buyers in a room, and the association newsletter will often run a short survey for a member.
  • LinkedIn: search people by the job titles in the audience line, message ten a day with one question (not a pitch), and ask for twenty minutes. Expect one in five to say yes.
  • Your deposit list from the kill question and anyone who replied to the fake door: those are the first interviews, not the last.

The plan: 15–20 conversations, then a fake door

  1. 15–20 real conversations (ten budget-holders and ten users), fifteen minutes each, using the script below. Before writing a line of code or ordering a board. Write up each one the same day: the problem in their words, what they do today, what it costs them, what they said when you named the price.
  2. A fake door. One page: the pitch as the headline, a rendered image or a photo of a cardboard mock-up, the price (€199–299, the pack's estimate), and one button. For a business buyer the button is "request a pilot" that leads to a short form and a letter of intent.
  3. Send it to everyone you interviewed and post it, with the problem question first, in the communities above. Run it for two to four weeks.
  4. Count against the kill question. Then decide: go, change the idea, or stop.

Interview script (fifteen minutes, problem first)

Ask, then be quiet. Do not describe the product until question 5; if you pitch first you will only hear politeness.

Pre-order / pilot message (forum post or direct message)

Reading the signal

Real signalFalse positive
A refundable deposit, a signed LOI, a paid pilot, a calendar invite for the prototype"Sounds cool", "I would totally buy that", likes and upvotes
They describe the problem unprompted and in detail, with numbersThey agree with your description of the problem
They have already paid for a workaround (a product, a service, their own time)They have never tried anything and are not bothered
Landing-page conversion to deposit or form above the pack's pass mark, from cold trafficConversion from friends, family and your own network
A named budget and a named decision-maker (B2B)An enthusiastic user who cannot buy

Go / no-go

  • Go to section 3 (business plan) and section 4 (start kit) when the kill question above is met by your own numbers, you have 15–20 written-up conversations, and at least one real signal from the left column per segment you plan to sell to. Only then does section 5 (Who to contact) apply.
  • Change the idea when the problem is real but the price, the buyer or the form factor in the pitch is wrong: the interviews will tell you which. Rewrite the pitch and run the fake door again; this is normal and costs a week.
  • Stop when the kill question fails on honest numbers, or when nobody you talked to has paid for a workaround. Pick another idea on this site; the boards in the start kit are not wasted, only unused.

The full worksheet, with how to define the segment and run the fake door, is in the playbook → validate demand.

3 · Business plan · estimates, not a forecast

Business plan

Problem & customer

Three groups, same tool, different pitch:

  1. Pack rebuilders and battery-repair shops (power-tool, garden-tool, household-appliance and solar-storage packs; e-waste reuse lines). They test cells all day on hobby chargers and a spreadsheet. They pay for speed, repeatability and a label they can show the customer. Buys 2–5 units.
  2. Repair cafés and repair associations — ~3,800 Repair Cafés are registered worldwide, 87% of survey responses come from Europe (4th Global Repair Café Survey). They need a safe answer to "is this cell still good?" and a tool that volunteers can't misuse. Buys 1 unit, often grant-funded.
  3. DIY solar-storage builders — the "powerwall from laptop cells" crowd. Price-sensitive, forum-driven, loud. Great for launch noise; bad for margin.

Who pays vs who uses: the shop owner/association pays; the technician/volunteer uses it. The buyer wants fewer returns and no fires; the user wants fewer button presses.

Market size (estimates)

  • EU + UK: ~2,500 repair cafés and repair associations (estimate from the ~3,800 global figure); ~6,000 battery-repair and power-tool/garden-tool shops that rebuild packs (estimate); ~1,500 e-waste handlers with a reuse line (estimate); ~40,000 active DIY storage builders (estimate from forum sizes). Call it 50k potential seats.
  • TAM: 50k × €249 ≈ €12.5 M (one-off hardware; labels and electrode consumables add ~10%).
  • SAM: sites that grade ≥ 50 cells a month and have a budget — 30% of the professional segments plus 10% of DIY → ~6,500 → €1.6 M.
  • SOM (3 years): 20% of SAM → 1,300 units → €325k, plus consumables. Small. The upside is the data: a grading standard that insurers and the Battery Regulation "repurposing" operators can cite. Don't pitch this as a big-market company; pitch it as a profitable niche tool with a standards angle.

Competition

AlternativeNotesWeakness we attack
Marketplace 4-slot "capacity testers" (€25–55, sigmanortec, Fruugo listings)Cheap, everywhereIR readings "spurious" per forum testers (BLF); no log, no label, no thermal cut-off, no CE file
Analysing chargers (Lii-500 class, €20–35)Good enough for hobbyistsSame: no repeatable IR, no export, no self-discharge test
Industrial cyclers / battery analysers (€2,000–20,000)AccuratePrice, size, needs a lab tech
Spreadsheet + multimeter + hobby charger ("do nothing")The default todaySlow, no record, volunteer-dependent, fires happen
DIY ESP32 + INA226 testersMakers build themNobody certifies or maintains them; no label

Wedge: repeatable grade + printed label + CSV, with thermal cut-off per slot and a CE file, at a tenth of the industrial price. "Grading you can show the customer."

External market check

Competitors, demand signals and price comparables found by web search in November 2026. Sources are named as found and not linked; as researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast.

Who / sourceWhat it isWhat it tells us
Zbotic cell-grading guideHow-to with existing testersTechnique established
Sigma Nortec 18650 tester module; ZB206+Commercial testersComponent-level substitutes exist

Verdict as researched: LIKELY. Main risk: Demand is unverified rather than contradicted; the kill question's fifteen commitments are the test.

Product & value proposition

Hardware: desktop box, 4 slots (18650 and 21700 with a spring contact), 5 V/4 A USB-C PD or 12 V certified PSU, per-slot: CC/CV charge to 4.20 V, constant-current discharge 0.5–1.5 A into a resistive load with a fan, INA226-class voltage/current monitoring, NTC per slot, electronic fuse. Firmware: DC-IR (pulse method) and optional AC-IR add-on, capacity in mAh/Wh, self-discharge mode (charge, rest 7 days, re-measure OCV), grade thresholds editable, thermal label printer over USB (common 58 mm thermal printers) or QR on screen, CSV to SD/USB and a desktop page. A later 8-slot "Pro" at €449.

Pricing (estimates): €249 direct, €449 8-slot Pro, labels €12 per roll; B2B/distribution at 35–40% off. No subscription.

Unit economics (estimates per unit, ex-VAT, 4-slot)

Item1k units5k units
Electronics BOM (MCU, 4× INA226-class, 4× charge/discharge stage, load resistors, fan, 2.8" LCD, PCB)€46.00€36.00
Assembly & test (SMT, per-slot calibration against a reference cell, fan test)€7.50€5.00
Enclosure (ABS 2-shell, 4 slot inserts, heat path; tooling amortised)€7.00€4.20
Packaging (box, USB cable, quick sheet; PSU separate)€3.00€2.20
Freight + duty to EU€3.50€2.00
Certification amortised (~€22k: EMC, LVD/EN 62368-1 energy-hazard review, RoHS)€22.00€4.40
Landed cost€89.00€53.80
Sell price (direct €249 / distributor €155)€249€155
Gross margin€160 (64%)€101 (65% at distributor)

Margin is fine for a tool. The 8-slot Pro roughly doubles BOM and adds €200 of price.

Go-to-market

First 100 customers: 15 pack rebuilders in one country (kill question) with a video of a 4-slot run; national repair-café networks (Repair Café International's registered list, the Restarters community in the UK, Reparatur-Initiativen in DE); DIY powerwall forums and YouTube channels (send 5 review units); power-tool and garden-tool repair shops via their trade associations; e-waste reuse pilots funded by municipalities.

Scale channels: electronics distributors that sell to repair shops (test-equipment category); repair-tool web shops; battery-recycling consortia (they are being pushed to reuse by the regulation and need a grade); vocational schools teaching battery repair.

12-month plan

QuarterMilestones
Q1Works-like 4-slot from the open meter board + INA226 units; grading algorithm validated against a reference cycler; 15 rebuilder commitments at €249 (kill question).
Q2Custom PCB, tooled case, label printer support; EVT 50; thermal abuse tests; pre-compliance.
Q3DVT, certification, 300-unit pilot to deposit holders; CSV/pack-matching tool; repair-café network listing.
Q41,000 units; 8-slot Pro EVT; one distributor; publish the grading method openly so it becomes "the" method.

Team: 1 power/analogue engineer (charge/discharge stages, thermal, calibration — full-time), 1 firmware/desktop developer (part-time → full-time), founder for sales and the repair community; a battery-safety consultant for a week to review the energy-hazard design.

Funding to first 1,000 units (estimates): NRE €38k (PCB €9k, tooling €12k, firmware/desktop €14k, safety review €3k) + certification €22k + 1,000 units landed ~€67k + 9 months lean overhead €60k ≈ €187k; minus deposits (~€30k) and pilot sales (~€62k) ≈ ~€95k. Route: deposits + bootstrap; circular-economy and repair grants (national and EU-regional) fit this product unusually well; an angel only if you want the 8-slot Pro faster.

Top risks

RiskMitigation
Technical: IR measurement repeatability (contact resistance dominates)4-wire Kelvin contacts in the slot; gold-plated spring pins; calibrate each slot with a reference; publish ±5% spec
Technical: heat — 4 cells discharging at 1 A is ~15 W into resistorsMetal heat-spreader, fan, per-slot NTC cut-off at 45 °C cell surface; derate on fan failure
Safety/regulatory: a cell vents on your benchElectronic fuse per slot, slot cover, no charging above 4.20 V, "never leave unattended" wording, EN 62368-1 energy-hazard review; liability insurance
Market: DIY crowd wants it at €99Serve them with the open method, not the hardware; sell the tool to shops
Market: niche is smallKeep NRE small; the Pro and the label/consumable line carry the margin
Supply: INA226-class allocation; thermal printer vendors change USB protocolsSecond-source monitor IC footprint; support ESC/POS printers generically
Licence: the two OSHWHub designsRead each project's licence; redraw your own board — they are references, not production files
4 · Start kit · boards, BOM, build plan, certification

Start kit

Boards to start from

BoardLinkWhat it contributesFiles (catalogue)Licence note
CN3300 4-series pack board (OSHWHub)gongbans.com/db/oshwhub-dian-chi-zu-ban-copy-copy.htmlOpen charge-path reference for a multi-cell boardschematic, pcbOSHWHub — licence varies per project; read it
M5Stack Unit INA226-10A (U200)gongbans.com/db/m5stack-unit-ina226-10a.htmlPrecision current/voltage measurement for the works-likeenclosure/structure only; electronics not publishedBuy the unit; use the INA226 datasheet for your own board
STC8H3K dual-channel V/I/capacity meter (OSHWHub)gongbans.com/db/oshwhub-stc8h3k-tssop20-dian-ya-dian-liu-biao-copy-copy-copy.htmlOpen dual-channel voltage/current/capacity meter with 12864 LCD — the closest thing to a cell tester in the catalogueschematic, pcbOSHWHub — check licence
M5Stack VAMeter (K136)gongbans.com/db/m5stack-vameter.htmlDisplay + measurement reference for a handheld single-slot variantenclosure/structure only; electronics not publishedBuy; documentation reference

Board-fact note: no board in the catalogue is a complete charge/discharge cycler. The discharge stage (load + control) is your own design.

Block diagram

[Slot 1..4: Kelvin contacts + NTC] --+--> [INA226-class V/I monitor per slot]
       |                             |
 [Charge stage per slot: CC/CV 4.20 V, 1 A]   [Discharge stage per slot: MOSFET + 1-4 ohm load, 0.5-1.5 A]
       |                             |
       +----------- [MCU (ESP32-S3 or STM32G4)] -----------+
                        |          |          |
                 [2.8" LCD + 3 buttons] [USB-C: PSU 5 V/4 A PD or 12 V jack] [USB host -> thermal label printer]
                        |
              [microSD CSV] [optional BLE for the desktop page]
              [fan + heat spreader under the loads]

Engineering gap: the per-slot bidirectional stage (charge + controlled discharge), the Kelvin slot mechanics, the thermal path, the IR pulse method, the grade algorithm, and the label/CSV pipeline. The measurement ICs and charge references exist; the product is the slot and the method.

Starter BOM (estimates per unit at 1k)

PartEst. costNotes
ESP32-S3 module (or STM32G4 + separate BLE later)€2.60Pre-certified module; BLE optional
4× INA226-class V/I monitor€4.80Second-source footprint (other shunt monitors)
4× Li-ion charger stage (CC/CV IC or MCU-controlled buck)€4.40Keep to 4.20 V max; thermal foldback
4× discharge MOSFET + power resistors + heat spreader€6.00Resistors are the hot part; aluminium plate
4× 18650/21700 slot with Kelvin spring pins€7.00Custom mechanics; sole-source risk — qualify two pin vendors
2.8" LCD + buttons€4.50
Fan 40 mm + NTCs + eFuse parts€2.70
PCB 4-layer, passives, USB-C PD, SD€5.50
Enclosure ABS 2-shell€7.00Tooling €10–14k
Certified PSU (USB-C PD 45 W or 12 V 4 A)€4.00Buy certified; don't design mains

Firmware/software starting point

  • ESP-IDF or Arduino; INA226 driver libraries exist for both (search "INA226 Arduino library").
  • Charge/discharge control, IR pulse method (ΔV/ΔI over a 10 ms–1 s pulse) and self-discharge scheduling: write yourself; the maths is simple, the edge cases (contact bounce, temperature) are the work.
  • Labels: ESC/POS over USB host to common 58 mm thermal printers (search "ESC/POS ESP32 USB host"); QR on screen as the fallback.
  • Desktop: a static web page reading CSV for pack matching (sort by capacity and IR, propose groups). No cloud.
  • Reference: open hobby cell-tester projects exist on GitHub — search "18650 capacity tester open source" and read a few before you decide on the load stage.

12-week build plan

WeeksPhaseExit criteria
1–2ValidateBench rig (open meter board + 4× INA226 units + resistors) grades 20 cells; video of a 4-slot run; 15 rebuilders/repair cafés in one country commit at €249 (deposits accepted; runs to W6)
3–5Works-like4-slot rig with Kelvin pins; capacity within ±3% of a reference cycler; IR repeatable within ±5% across 10 re-insertions; thermal cut-off demonstrated
6–8Looks-like + EVTCustom PCB v1, tooled case T1, label printer working; 50 units; abuse tests (shorted slot, reversed cell, cell at 60 °C) pass without smoke
9–10DVT + pre-complianceEMC pre-scan; EN 62368-1 energy-hazard review by a lab; 7-day self-discharge mode validated; CSV/pack-matching page done
11–12Pilot batch50 units to deposit holders; ≥ 500 cells graded in the field; grade agreement with re-tests ≥ 95%

Certification checklist (EU)

  • CE under EMC + LVD (no radio in the base SKU): EN IEC 61000-6-1/-3, EN IEC 62368-1 with an energy-source review of the slots (ES/PS classes) and the discharge loads; if the certified PSU stays external, mains stays out of your box. Est. €5–8k EMC, €4–7k safety review. If you add BLE: RED (EN 300 328, EN 301 489) +€4–6k and EN 18031 if it connects to the internet (it shouldn't — keep it local).
  • RoHS, REACH, WEEE registration per country; packaging registration.
  • Battery regulation: the device contains no battery; the cells your customers test are theirs. Still: wording that the tool is not a certification of a cell for resale, and a safety sheet on handling Li-ion. If you later sell a battery-backed handheld: UN 38.3 + labelling.
  • CRA: applies to products with digital elements; reporting obligations from 11 Sept 2026, full application 11 Dec 2027 — signed firmware, update path over USB, vulnerability contact.
  • GDPR: none (no personal data). Toy directive: no.
  • Total certification budget estimate: €12–18k (no radio), €22k with BLE.

Validation toolkit

  • Kill question: Do 15 repair cafés or rebuilders in one country commit to buy at €249 after a video of a 4-slot grade run?
  • Cheapest experiment (~€400 + a weekend): bench rig from the open meter board and 4 INA226 units, 20 salvaged cells, a 3-minute video, a one-page spec sheet with the grade definition; email it to 60 shops/cafés with a €49 refundable deposit link.
  • 5-question interview (rebuilder / repair-café lead): 1) How many cells do you test a month, and with what? 2) What do you do with a cell whose IR you don't trust? 3) Has a reused cell ever come back or failed — what happened? 4) Would a printed grade label change what you can sell or promise? 5) €249 for 4 slots, label and CSV — what would make you say no?
  • Landing page: headline "Grade salvaged cells like a factory does — on a repair bench." Bullets: "Capacity, internal resistance and 7-day self-discharge, four cells at a time." / "Prints a grade label and exports CSV so matched cells go into one pack." / "Per-slot temperature cut-off and an electronic fuse. €249, no subscription."
  • Pass threshold: 15 commitments with deposit in one country, or 80 deposits in total within 4 weeks.

First production checklist

  • Samples: 5 golden samples with per-slot calibration records against a reference cell and cycler.
  • DFM: slot pin life (≥ 10,000 insertions), heat spreader contact, fan intake, PSU strain relief; test jig with four dummy loads and a reference source.
  • MOQ talk: slot pins 2k; power resistors reel; LCD 1k; case 1k; certified PSU 1k.
  • QC: AQL II 2.5/4.0; 100% functional test (each slot charges and discharges a dummy, NTC plausibility); 2% full-cycle burn-in.
  • Packaging: no lithium in the box; PSU separate; quick sheet with the safety wording.
  • Incoterms: FOB Shenzhen; air for the first 100; sea afterwards.
5 · Who to contact · from gongban.db

Who to contact

On file: 1 board publisher (M5Stack). Only useful once section 2 (validate demand) has passed. Everything below comes from gongban.db, the directory behind this site. It names the companies that publish the boards this idea is built from, the manufacturers on file, and directory entries in the same product category. None of it is a verified supplier relationship for this specific idea: nobody has quoted it yet. Company websites only; no personal contacts are published.

Board publishers (direct)

  • M5Stack — community / maker brand; 274 boards in the catalogue; files via M5Stack M5_Hardware repo · github.com/m5stack/M5_Hardware. Boards used here: M5Stack Unit INA226-10A (U200) (precision current/voltage measurement); M5Stack VAMeter (K136) (display + measurement reference for the handheld variant). What to ask for: sample units of the SKUs above, unit pricing at 100 / 500 / 1,000, whether a customised variant is possible (and its NRE and MOQ), and the module's radio test reports if any.

Open-hardware boards without a company behind them

  • OSHWHub community designs — community projects on OSHWHub 立创开源硬件平台 (JLC open hardware platform) · oshwhub.com . The author is an individual, not a supplier, and author handles are not published here. Fabricate from the files through a PCBA house (below) and check each project's licence first. Boards used here: CN3300 4串电池组板 (open CN3300 4-cell pack board as charge-path reference); STC8H3K64S2制作12864LCD双路电压电流容量表 (open dual-channel voltage/current/capacity meter).

Manufacturing (PCBA / EMS) on file

  • Kingbrother / King Brother Technology · global.kingbrother.com/ — PCB fab + EMS; see the Kingbrother SOM page on this site.
  • Foxlink (SZ) (正崴精密工业(深圳)有限公司) · foxconn.com — PCBA + cable assembly EMS: Cable assembly; PCBA; connector; OEM for major electronics brands.

Also in the directory (category match, not idea-specific)

Companies in the gongban.db solution-house directory whose product category overlaps this idea. They were matched on the idea's tags, not on this design; none has seen it.

  • Linkage Technology (深圳市联控智能科技有限公司) · linkage-tech.com — Smart meter / energy IoT solution house: Smart energy meter; sub-metering IoT; NB-IoT / LoRa; OEM/ODM. (Smart-metering / energy IoT)
  • GREPOW (深圳格瑞普电池有限公司) · grepow.com — High-rate Li-Po / NiMH battery OEM: High-drain Li-Po; shaped/custom battery; NiMH; UAV battery. (Custom Li-Po / NiMH batteries)

MOQ and landed cost

gongban.db holds no MOQ, unit-price or tariff data for these companies, so none is shown. Get the numbers from the quote (the e-mail below asks for them) and run them through the landed-cost worksheet in the playbook. The starter BOM in the start kit section is an estimate, not a quote.

Outreach e-mail, ready to send

Fill in the [brackets], keep it short, and send it to the sales or "contact us" address on the company's own website. The Chinese version is the same letter; sending both in one mail is normal. How to read the reply: playbook → the first quote.

A. To a board publisher — samples and volume price (send to the sales / "contact us" address on the M5Stack website)

A. 中文版

B. To a PCBA / EMS house — quote from the open design files (send to Kingbrother, Foxlink or any assembler you vet; see the playbook)

B. 中文版

6 · Next steps · this week

Next steps (this week)

  1. Fab or buy the open meter board, order 4× Unit INA226-10A, 8 power resistors and a fan; have 4 cells cycling on a bench by day 7 and film it.
  2. Pull a list of 60 battery-repair shops, power-tool/garden-tool repairers and repair cafés in your country; write the deposit email with the grade definition on one page.
  3. Read Regulation (EU) 2023/1542's articles on repurposed and remanufactured batteries (EUR-Lex consolidated text) and note exactly which claims a grader may and may not make.
Get this built

Want this built?

Get sourcing and manufacturing help from a team in Shenzhen and Europe.

Never built hardware? Start with the zero-experience founder playbook: samples, the first quote, CE/FCC, customs, logistics and the kill question, in order. Board facts come from the catalogue; everything else in this pack is an estimate.

Get this built →

Start pack cell-grader · written by the GONGBANS inventor from the public catalogue and public sources. Concept generated by the GONGBANS inventor from the public catalogue, then expanded into a start pack. Not a product, not validated; every number (market, BOM, price, effort, certification cost) is a rough estimate to be checked, not a quote. Check each board's licence before commercial use. Not legal, tax or investment advice. Idea page · Download as Markdown · All 50 start packs →