# Build-a-Radio Workshop Kit — Founder Start Pack

> A no-code, solder-it-yourself MW/SW/FM radio in a laser-cut wooden case for schools, makerspaces and team workshops — it plays music at the end of the afternoon.
>
> *Concept from the GONGBANS inventor. Not validated. All numbers are estimates — check them. Check every board's licence before commercial use.*

## 1. Summary

- **Problem:** Physics teachers must teach waves and modulation; the only kits around are either 1990s-looking plastic (and out of stock) or "smart" kits that hide everything in an MCU. A real analogue radio that the pupil builds and keeps is the classic payoff, and it's missing in a modern, classroom-ready form.
- **Customer:** Secondary-school physics departments (DE/NL/UK first), makerspaces and museum workshops, corporate team-event organisers. The school or the event organiser pays; the 14-year-old uses it.
- **Product:** Through-hole PCB laid out for beginners, numbered 4-language build sheet, laser-cut wooden case, teacher's guide mapped to curriculum topics. €45 ex-VAT per kit in class sets of 15; €49 incl. VAT to consumers.
- **Why now:** Open four-band radio design exists with schematic and PCB; STEM budgets exist; no firmware, no app, no cloud — the fastest idea in the catalogue to a saleable product (6–10 weeks).
- **The ask:** ~€30k to the first 1,000 kits; bootstrap with pre-paid class sets.

<!-- market-check:start -->
> **External market check (November 2026): LIKELY (CONTESTED).** Elenco's WEmake FM soldering kit sells at about £31–47, with volume pricing around $43 at 25+ units: a real category with real demand, already owned by an established, cheaper incumbent. **Main risk:** Needs a clear differentiator (laser-cut case, no-code angle) to win a teacher's budget over Elenco. *As researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast. Competitors and sources found: see [the market check in the competition table](#external-market-check).*
<!-- market-check:end -->

## 2. Validate demand first

<!-- validate-demand:start -->
**Do this before anything else in this pack: before the business plan, before you order a sample board, and long before you e-mail a factory (section 5).** The classic first-time mistake is to source and build first and find out later that nobody wanted it. Hardware mistakes are slow and expensive to undo; 15–20 conversations are cheap.

### The gate: this idea's kill question

> Do 10 teachers or makerspaces order a class set (15 kits) at €45 each from a one-page offer?

You pass this section when you can answer that question with evidence you collected yourself, not a guess: a measured conversion on a fake-door landing page for the consumer side and, for the business side, at least three decision-makers who put something on paper: a letter of intent, a paid pilot or a purchase order. Until then: no factory e-mail, no sample order, no firmware, no logo. If the answer is no, you have lost a few weeks and saved the rest.

### Who you are looking for

**The audience named in the idea:** Secondary-school physics teachers, makerspaces, museum workshops and team-event organisers in DE/NL/UK.

**The problem as the pack states it:** Physics teachers must teach waves and modulation; the only kits around are either 1990s-looking plastic (and out of stock) or "smart" kits that hide everything in an MCU. A real analogue radio that the pupil builds and keeps is the classic payoff, and it's missing in a modern, classroom-ready form.

Talk to the people who have the problem *and* the people who pay; in B2B they are often not the same person, and the one who pays decides.

### Where to find them

Communities and associations where this audience actually talks, as far as we know them in November 2026. Confirm each is still active and read its rules on self-promotion before posting; most allow a genuine question about a problem and ban a pitch.

- **r/ScienceTeachers** · https://www.reddit.com/r/ScienceTeachers/ — secondary-school science teachers.
- **r/amateurradio** · https://www.reddit.com/r/amateurradio/ — radio hobbyists who also teach and mentor.
- **MNU (DE)** · https://www.mnu.de/ — German association of maths and science teachers; regional conferences.
- **Tes Community (UK)** · https://community.tes.com/ — UK teachers' forum.

Beyond the named ones, the same four methods work for every idea on this site:

- **Search for communities around the problem, not the product:** forums, Facebook groups, Discord servers and newsletters in your own country for the terms in the audience line above. Many of the best groups are national and in the local language; a Dutch or German group beats a global English one for an EU launch.
- **Trade associations and their regional meetings** for the B2B audiences: one meeting puts twenty buyers in a room, and the association newsletter will often run a short survey for a member.
- **LinkedIn:** search people by the job titles in the audience line, message ten a day with one question (not a pitch), and ask for twenty minutes. Expect one in five to say yes.
- **Your deposit list from the kill question** and anyone who replied to the fake door: those are the first interviews, not the last.

### The plan: 15–20 conversations, then a fake door

1. **15–20 real conversations** (ten buyers from the business side and ten from the consumer side), fifteen minutes each, using the script below. Before writing a line of code or ordering a board. Write up each one the same day: the problem in their words, what they do today, what it costs them, what they said when you named the price.
2. **A fake door.** One page: the pitch as the headline, a rendered image or a photo of a cardboard mock-up, the price (€39–59, the pack's estimate), and one button. Two buttons: a refundable deposit or waitlist for consumers, "request a pilot" for businesses.
3. **Send it** to everyone you interviewed and post it, with the problem question first, in the communities above. Run it for two to four weeks.
4. **Count** against the kill question. Then decide: go, change the idea, or stop.

### Interview script (fifteen minutes, problem first)

Ask, then be quiet. Do not describe the product until question 5; if you pitch first you will only hear politeness.

```email
Thanks for the time. I am looking into how secondary-school physics teachers, makerspaces, museum workshops and team-event organisers in DE/NL/UK deal with [the problem in their words]; I have not built anything yet and I am trying to find out whether it is worth building.

1. What did your students build last year with their own hands, how did you pay for the kits, and what went wrong?
2. What do you do about it today, and what does that cost you in money or time per month?
3. What have you already tried or bought, and why did you stop using it?
4. If this went away tomorrow, what would change for you? (If the answer is "not much", you have your answer.)
5. [Only now describe it in one sentence:] A no-code, solder-it-yourself MW/SW/FM radio kit in a laser-cut wooden case for schools, makerspaces and corporate team workshops. On a scale of one to ten, how likely would you be to buy that at €39–59, and what would make it a ten?
6. Who else should I talk to about this? (Ask for two names.)

Close: "If I build this, can I come back to you with a prototype?" A yes with a calendar date is worth more than any compliment.
```

### Pre-order / pilot message (forum post or direct message)

```email
Subject: Build-a-Radio Workshop Kit: would you pay €39–59 for this? Looking for 20 people to tell me I am wrong

I am [your name], [your background]. I am considering building a Build-a-Radio Workshop Kit: A no-code, solder-it-yourself MW/SW/FM radio kit in a laser-cut wooden case for schools, makerspaces and corporate team workshops. Before I order a single part I want to know whether this is a real problem for people like you or only in my head.

If you would want one at €39–59, the page at [link] takes a fully refundable €[10–20] deposit (or a waitlist e-mail if you prefer); if twenty people do that, I build it, if not, everyone gets their money back and I have learned something.

Either way, two questions: how do you deal with this today, and what would make you say no? Honest answers are worth more to me than deposits.
```

### Reading the signal

| Real signal | False positive |
|---|---|
| A refundable deposit, a signed LOI, a paid pilot, a calendar invite for the prototype | "Sounds cool", "I would totally buy that", likes and upvotes |
| They describe the problem unprompted and in detail, with numbers | They agree with your description of the problem |
| They have already paid for a workaround (a product, a service, their own time) | They have never tried anything and are not bothered |
| Landing-page conversion to deposit or form above the pack's pass mark, from cold traffic | Conversion from friends, family and your own network |
| A named budget and a named decision-maker (B2B) | An enthusiastic user who cannot buy |

### Go / no-go

- **Go to section 3 (business plan) and section 4 (start kit)** when the kill question above is met by your own numbers, you have 15–20 written-up conversations, and at least one real signal from the left column per segment you plan to sell to. Only then does section 5 (Who to contact) apply.
- **Change the idea** when the problem is real but the price, the buyer or the form factor in the pitch is wrong: the interviews will tell you which. Rewrite the pitch and run the fake door again; this is normal and costs a week.
- **Stop** when the kill question fails on honest numbers, or when nobody you talked to has paid for a workaround. Pick another idea on this site; the boards in the start kit are not wasted, only unused.

The full worksheet, with how to define the segment and run the fake door, is in the [playbook → validate demand](/playbook.html#validate).
<!-- validate-demand:end -->

## 3. Business plan

### Problem & customer
Every curriculum in Europe covers electromagnetic waves, oscillation and modulation at 14–16. Teachers want a 90-minute to 3-hour practical that ends with something that works and goes home. Existing options: Franzis UKW kits (€24–39, consumer, German-only, often sold out), Elenco AM/FM kits (US$46, 56-page English course, superhet — too hard for a first solder), Velleman/Whadda mini kits (no case, no didactics). Nothing comes as a class set with a teacher's guide, spare-parts bag and a case the pupil is proud of.

Who pays: the physics department head from the Fachschaft budget (typically €500–2,000/year for consumables); the makerspace from course fees (participants pay €30–60 for a Saturday workshop and keep the radio); HR or an agency for team events (€80–150/head, the kit is a small part). Who uses: pupils 14+, adults in workshops.

### Market size (estimates — check them)
- **TAM:** Secondary schools: ~10,000 in Germany with a physics department (Gymnasium, Realschule, Gesamtschule), ~650 in NL, ~4,200 in the UK; plus ~2,000 makerspaces/Fablabs and museum education departments in Europe. If each bought one class set of 15 a year (€675), TAM ≈ 17,000 institutions × €675 ≈ **€11 M/year**. Consumer kit sales on top (Franzis has sold these for 20 years, so the hobby demand is real).
- **SAM:** schools and spaces reached via 3–4 educational distributors and direct in DE/NL/UK: 20% of TAM ≈ **€2.3 M/year**.
- **SOM (year 2):** 300 class sets + 3,000 single kits ≈ 7,500 kits ≈ **€330k revenue**.

### Competition (2 searches)
| Alternative | Price | Weakness |
|---|---|---|
| Franzis UKW-Radio Bausatz (DE) | €24–39 retail | Consumer, single-language, stock issues, no class set/teacher guide |
| Elenco AM/FM-108CK (US) | ~US$46 | Superhet, 56-page English course — too advanced for a first build; import |
| Velleman/Whadda mini FM kits | €15–25 | No case, no didactics |
| Crystal-radio / tin-can DIY from the web | ~€5 | Weak sound, frustrating; teacher does all the prep |
| Do nothing — PhET simulation on a laptop | €0 | No physical payoff, pupils forget it |

**Wedge:** classroom-ready: class set of 15 + spares + 4-language numbered steps + teacher's guide mapped to curricula (DE Lehrplan waves/modulation, NL natuurkunde, UK GCSE Physics P6) + wooden case. Sell to the department, not the pupil.

<!-- market-competitors:start -->
#### External market check

Competitors, demand signals and price comparables found by web search in November 2026. Sources are named as found and not linked; as researched November 2026 by web search; verify before relying on it. Verdicts are a reading of the evidence found, not a forecast.

| Who / source | What it is | What it tells us |
|---|---|---|
| Elenco WEmake FM kit (Cogs Toys) | About £31 | Cheaper incumbent in the same category |
| Jameco: Elenco volume pricing | About $43 at 25+ units | Class-set pricing already exists |
| Fruugo DIY radio kit | About $69 | Upper end of the hobby tier |

**Verdict as researched: LIKELY (CONTESTED).** Main risk: Needs a clear differentiator (laser-cut case, no-code angle) to win a teacher's budget over Elenco.
<!-- market-competitors:end -->

### Product & value proposition
- **Kit v1 "Classic":** four-band MW/SW/FM receiver derived from the open OSHWHub design; volume pot, tuning pot, band switch; through-hole parts spaced for beginners; 2× AA battery; 57 mm speaker; laser-cut plywood case that doubles as the soldering jig.
- **Kit v2 "FM-only Junior":** FM-only variant for younger groups and shorter sessions (based on the Grove FM receiver circuit).
- **Classroom speaker add-on:** 10 W amp (TDA2030 open board) and a bigger speaker for the "we built a radio station… receiver" demo.
- **Pricing:** class set of 15 + 2 spare boards + parts bag: **€675 ex-VAT (€45/kit)**. Single kit B2C €49 incl. VAT. Workshop pack for makerspaces (30 kits + guide) €1,200. Teacher's guide free as PDF (lead magnet).

### Unit economics (estimates, per kit)
| Item | 1,000 kits | 5,000 kits |
|---|---|---|
| Electronics BOM (PCB, radio IC/transistors, pots, switch, speaker, passives) | €9.50 | €7.20 |
| Kitting (bagging, labelling — no assembly) + QC sample test | €2.00 | €1.30 |
| Wooden case (laser-cut 3 mm ply, 6 parts) | €3.20 | €2.20 |
| Packaging + printed 4-language sheet | €1.80 | €1.10 |
| Freight + duty to EU | €1.50 | €0.80 |
| Certification amortised (€8k) | €8.00 | €1.60 |
| **Landed cost** | **€26.00** | **€14.20** |
| Sell price (class set, direct, ex-VAT) | €45 | €45 |
| Channel: educational distributor takes 40% of €59 list → net €35 | — | €35 |
| **Gross margin direct** | **42%** | **68%** |
| **Gross margin via distributor** | 26% | 59% |

The 1,000-unit margin is thin because certification is amortised over few units; it's a volume game — plan 5,000 as the real target and buy the wooden case in Europe to skip freight on the bulky part.

### Go-to-market
**First 100 customers (≈ 20 class sets + 300 singles):** physics teacher associations and their conferences (DE: MNU/DPG teacher days; NL: NVON; UK: ASE), teacher Facebook/Telegram groups, 5 makerspaces that run Saturday courses (offer the first 30 kits at cost in return for photos and a quote), museum education departments (technology museums run holiday workshops), two YouTube electronics channels for the consumer sale. Give 20 kits to teachers for a lesson trial and collect their worksheet corrections.

**Scale:** educational distributors (the ones that already sell lab equipment), Amazon for singles, corporate team-event agencies (they pay the most and complain the least), licensing the teacher's guide translations to local distributors in FR/IT/PL.

### 12-month plan
- **Q1:** Re-layout the open design through-hole, 20 hand-built prototypes, 3 teacher trials. Gate: 10 teachers/makerspaces order a class set at €45/kit from a one-page offer.
- **Q2:** Receiver test at a lab, first 1,000 kits, teacher's guide v1 in DE/EN/NL/FR, distributor talks.
- **Q3:** FM-only Junior variant, classroom speaker add-on, Amazon listing, first two distributors.
- **Q4:** 5,000-kit run, workshop pack for makerspaces/corporate, decide on FR/IT.

**Team:** one electronics engineer part-time (the design is done — this is DFM and sourcing), one teacher/didactics writer part-time, one founder on sales and ops. Nobody full-time until 3,000 kits.

**Funding to 1,000 kits (estimate):** NRE €12k (re-layout, laser-cut case design, test fixtures, photography) + certification €8k + 1,000 kits × €18 production cost = €18k → **~€38k**, of which pre-paid class sets can cover €13k+. Realistic cash need **~€25–30k**. Bootstrap; this does not need investors.

### Top risks
- **Technical — first-solder failure rate:** if 20% of kits don't play, the teacher never buys again. Mitigation: big pads, polarity marks, a "test before closing the case" step, spare boards in every set, a 10-minute debug card.
- **Market — budget cycles:** schools buy in spring and September. Mitigation: makerspaces and corporate events fill the gap.
- **Regulatory:** the ideas list said EMC/LVD self-declaration; I think a broadcast receiver sold as a product falls under **RED** (receivers are in scope since 2016) — verify with a lab before you print a CE mark. Battery-only, so no LVD. Not a toy if marketed 14+/education — don't put a cartoon on the box.
- **Supply:** the radio IC / discrete set and ferrite rod in the open design may be Chinese commodity parts with no EU distributor. Mitigation: buy 5,000 sets up front (cheap), qualify a second IC.
- **Licence:** OSHWHub projects are often CC BY-NC-SA. Check this project's licence; if non-commercial, re-design the schematic around the same architecture (it's a classic topology) or contact the author for permission.

## 4. Start kit

### Boards to start from
| Board | Contributes | Files (catalogue) | Licence note |
|---|---|---|---|
| [oshwhub-retro-four-band-radio](https://www.gongbans.com/db/oshwhub-retro-four-band-radio.html) | The whole receiver: no code, volume/tuning pots, band switch, MW/SW/FM | schematic, pcb | OSHWHub — licence varies, often CC BY-NC-SA; check before selling |
| [seeed-grove-fm-receiver](https://www.gongbans.com/db/seeed-grove-fm-receiver.html) | FM-only reference for the Junior variant | schematic | Seeed wiki — check licence |
| [oshwhub-tda2030](https://www.gongbans.com/db/oshwhub-tda2030.html) | 10 W amp for the classroom speaker add-on | schematic, pcb | OSHWHub — check licence |
| [seeed-grove-speaker](https://www.gongbans.com/db/seeed-grove-speaker.html) | Speaker driver reference | schematic | Seeed wiki — check licence |

### Block diagram and engineering gap
```
[Ferrite rod / telescopic antenna] -> [Band switch] -> [Receiver front-end + IF/demod (open design)]
        -> [Volume pot] -> [Audio amp] -> [57 mm speaker]
[2x AA] -> power
Case: 6 laser-cut ply parts, PCB screws into the front panel; the case bottom is the soldering jig.
```
Gap: zero firmware. The work is through-hole re-layout for beginners, part availability in Europe, the case, and the didactics. Expect two PCB spins.

### Starter BOM (per kit, estimates)
| Part | Est. cost | Note |
|---|---|---|
| Radio receiver IC(s)/transistors per open design | €1.60 | Check EU availability; may be China-only commodity — buy ahead |
| PCB 2-layer through-hole, 100×70 mm | €1.20 | Any JLC-class fab |
| Pots ×2 + knobs, band switch | €1.40 | — |
| Ferrite rod + coil, telescopic antenna | €1.10 | Ferrite rod is the long-lead item (6–8 weeks) |
| 57 mm 8 Ω speaker | €0.90 | — |
| Passives, AA holder, wire, screws | €1.80 | — |
| Audio amp IC | €0.50 | — |
| Laser-cut ply case | €3.20 | Source in EU to avoid freight on bulk |
| Printed sheet + bag + box | €1.80 | — |

### Firmware/software starting point
None — that is the point. Software deliverables are documents: build sheet (numbered, photos per step), teacher's guide (waves, modulation, why FM sounds better, antenna length maths), debug card. Use the open schematic as the basis of a "how it works" page.

### 12-week build plan
- **Week 1–2 — validate.** Order the open PCB as-is from the fab (10 pcs), build 5, test reception in a classroom building. Send a one-page offer (€45/kit, class set of 15) to 30 teachers and 10 makerspaces. *Exit:* 10 orders or firm yeses; the radio receives FM indoors.
- **Week 3–5 — works-like.** Through-hole re-layout, bigger pads, test points; 20 kits built by non-engineers (your friends) with a stopwatch. *Exit:* 90% first-time success, median build time <2.5 h.
- **Week 6–8 — looks-like + EVT.** Laser-cut case v2, 4-language sheet, 3 teacher trials with 15 pupils each. *Exit:* teacher says "I'd buy this" and corrects the sheet; failure rate <10%.
- **Week 9–10 — DVT + pre-compliance.** Final PCB, receiver/EMC test at the lab, battery-leak and drop checks. *Exit:* test report in hand.
- **Week 11–12 — pilot batch.** 300 kits kitted, 20 class sets shipped. *Exit:* 20 paid class sets, <5% returns.

### Certification checklist (EU)
- **RED** (receive-only radio equipment is in scope): EN 303 345 series (broadcast sound receivers), EN 301 489-1 (EMC), EN 62368-1 — battery-only so safety is trivial. Self-declaration (Module A) is allowed with harmonised standards. Est. **€4–8k**.
- **RoHS** (supplier declarations), **WEEE** registration in each country you ship to, **REACH** SVHC check (plywood glue, PVC wire).
- **Not internet-connected** → no EN 18031, CRA not applicable (no digital elements with a network).
- **No Li-ion** (AA cells — supply alkaline or let the school supply).
- **Toy Directive:** out of scope if clearly marketed 14+/educational; label "Not a toy. Soldering required. 14+".
- No GDPR.

### Validation toolkit
- **Kill question:** do 10 teachers or makerspaces order a class set at €45/kit from a one-page offer? **Cheapest experiment:** €300 — 10 open PCBs built as-is, a one-pager with photos, 40 emails.
- **5-question interview:** (1) Which practical do you run for waves/modulation today, and what does it cost? (2) How long is your practical slot — 45, 90, 180 minutes? (3) Who approves a €675 purchase and how long does it take? (4) What killed the last kit you tried? (5) Would you pay more for a case the pupil keeps, or less with no case?
- **Landing-page headline:** "Build a real radio in one afternoon — class set, teacher's guide, no code." Bullets: 15 kits + spares, 4 languages · Mapped to the waves & modulation curriculum · It plays music when they're done.
- **Pre-order pass:** 10 class sets (€6,750) or 150 single kits paid within 4 weeks.

### First production checklist
Samples of every part from the chosen distributor (not photos), golden sample kit sealed, DFM on the PCB (pad size for 14-year-olds, silkscreen numbers = sheet numbers), MOQ: 1,000 kitted bags with a 5,000 forecast, QC/AQL on kitting (count and polarity of pre-formed parts; one in 50 built and tested), packaging crush test, EXW/FOB for electronics, local supplier for ply cases, you are the importer and the CE responsible person.

## 5. Who to contact

<!-- who-to-contact:start -->
**On file: 1 board publisher (Seeed Studio).** Only useful once section 2 (validate demand) has passed. Everything below comes from gongban.db, the directory behind this site. It names the companies that publish the boards this idea is built from, the manufacturers on file, and directory entries in the same product category. None of it is a verified supplier relationship for this specific idea: nobody has quoted it yet. Company websites only; no personal contacts are published.

### Board publishers (direct)

- **Seeed Studio** (矽递科技(深圳)有限公司, seeedstudio.com) — community / maker brand; 183 boards in the catalogue; files via Seeed Studio wiki catalog · https://github.com/Seeed-Studio/wiki-documents. Directory entry: IoT module + open hardware OEM: XIAO ESP32S3; Grove modules; LoRa gateway; Jetson carrier; OEM PCBA. Boards used here: [Seeed Grove-FM Receiver](/db/seeed-grove-fm-receiver.html) (FM receiver reference for the simpler 'FM only' variant); [Seeed Grove-Speaker](/db/seeed-grove-speaker.html) (speaker driver reference). What to ask for: sample units of the SKUs above, unit pricing at 100 / 500 / 1,000, whether a customised variant is possible (and its NRE and MOQ), and the module's radio test reports if any.

### Open-hardware boards without a company behind them

- **OSHWHub community designs** — community projects on OSHWHub 立创开源硬件平台 (JLC open hardware platform) · https://oshwhub.com . The author is an individual, not a supplier, and author handles are not published here. Fabricate from the files through a PCBA house (below) and check each project's licence first. Boards used here: [简单的怀旧MW/SW/FM 四波段收音机](/db/oshwhub-retro-four-band-radio.html) (open four-band radio: volume, tuning, band switch — no code); [TDA2030功放](/db/oshwhub-tda2030.html) (open 10 W amp for the classroom-speaker version).

### Manufacturing (PCBA / EMS) on file

- **Kingbrother / King Brother Technology** · https://global.kingbrother.com/ — PCB fab + EMS; see the [Kingbrother SOM page](/boards-kingbrother.html) on this site.
- **Foxlink (SZ)** (正崴精密工业(深圳)有限公司) · foxconn.com — PCBA + cable assembly EMS: Cable assembly; PCBA; connector; OEM for major electronics brands.

### Also in the directory (category match, not idea-specific)

Companies in the gongban.db solution-house directory whose product category overlaps this idea. They were matched on the idea's tags, not on this design; none has seen it.

- **Jieli Technology** (珠海市杰理科技股份有限公司) · zh-jieli.com — TWS SoC chip solution house: AC69xx/AC70xx TWS SoC; 27B+ chips shipped; clients: Xiaomi / QCY / HP / Lenovo. *(Audio: speaker / earphone ODMs and the Jieli chip house)*
- **Fenda Technology** (深圳市奋达科技股份有限公司) · fenda.com — TWS earbuds / smart speaker ODM: TWS earbuds; smart speaker; smart home; clients: Amazon / Creative / Philips. *(Audio: speaker / earphone ODMs and the Jieli chip house)*
- **Haoern Acoustics** (深圳市豪恩声学股份有限公司) · haoen.cn — TWS / headphone ODM: TWS; ANC headphone; smart speaker; clients: vivo / RAZER / BEATS / HP. *(Audio: speaker / earphone ODMs and the Jieli chip house)*
- **Antixun** (深圳市安特信技术有限公司) · no website on file — TWS / smart audio ODM: TWS; ANC earphone; smart speaker; pivoted from solution house to ODM 2018. *(Audio: speaker / earphone ODMs and the Jieli chip house)*

### MOQ and landed cost

gongban.db holds no MOQ, unit-price or tariff data for these companies, so none is shown. Get the numbers from the quote (the e-mail below asks for them) and run them through the [landed-cost worksheet in the playbook](/playbook.html#landed-cost). The starter BOM in the start kit section is an estimate, not a quote.

### Outreach e-mail, ready to send

Fill in the [brackets], keep it short, and send it to the sales or "contact us" address on the company's own website. The Chinese version is the same letter; sending both in one mail is normal. How to read the reply: [playbook → the first quote](/playbook.html#quote).

**A. To a board publisher — samples and volume price** (send to the sales / "contact us" address on the Seeed Studio website)

```email
Subject: Sample order and volume pricing — Seeed Grove-FM Receiver, Seeed Grove-Speaker — for a Build-a-Radio Workshop Kit

Hello [company] sales team,

I am [your name], founder of [your company] in [country]. We are developing a Build-a-Radio Workshop Kit: A no-code, solder-it-yourself MW/SW/FM radio kit in a laser-cut wooden case for schools, makerspaces and corporate team workshops. The design is built around your Seeed Grove-FM Receiver, Seeed Grove-Speaker.

Could you please send:
1. Price and lead time for [10] sample units of each: Seeed Grove-FM Receiver, Seeed Grove-Speaker.
2. Unit pricing at 100 / 500 / 1,000 pieces, EXW Shenzhen and DDP [your city], including packaging.
3. Whether a customised variant is possible (our enclosure, connector, or firmware pre-loaded), with the NRE and MOQ for it.
4. Radio test reports or module certification documents, if available, so we can plan EU (CE/RED) certification.
5. Payment terms and accepted methods for a first order.

We can share our block diagram and target quantities under NDA if that helps.

Best regards,
[your name] · [your company] · [website] · [phone / WhatsApp]
```

**A. 中文版**

```email
主题：样品订购及批量报价 — Seeed Grove-FM Receiver, Seeed Grove-Speaker — 用于Build-a-Radio Workshop Kit

[公司]销售团队，您好：

我是[姓名]，[国家][公司]的创始人。我们正在开发一款Build-a-Radio Workshop Kit：A no-code, solder-it-yourself MW/SW/FM radio kit in a laser-cut wooden case for schools, makerspaces and corporate team workshops。产品设计基于贵司的Seeed Grove-FM Receiver, Seeed Grove-Speaker。

请提供以下信息：
1. 各[10]片样品的单价和交期：Seeed Grove-FM Receiver, Seeed Grove-Speaker。
2. 100 / 500 / 1,000 片的批量单价（深圳EXW及DDP到[城市]），含包装。
3. 是否可以定制（外壳、接口或预烧录固件），以及定制的NRE费用和最小起订量（MOQ）。
4. 如有，请提供射频测试报告或模组认证文件，以便我们规划欧盟CE/RED认证。
5. 首单的付款方式和条件。

如有需要，我们可在签署NDA后提供框图和目标数量。

祝好，
[姓名] · [公司] · [网站] · [电话 / WhatsApp]
```

**B. To a PCBA / EMS house — quote from the open design files** (send to Kingbrother, Foxlink or any assembler you vet; see the [playbook](/playbook.html#manufacturer))

```email
Subject: PCBA quote from open design files — Build-a-Radio Workshop Kit, [50] prototypes + [500] production units

Hello [company] sales team,

I am [your name], founder of [your company] in [country]. We are building a Build-a-Radio Workshop Kit: A no-code, solder-it-yourself MW/SW/FM radio kit in a laser-cut wooden case for schools, makerspaces and corporate team workshops. The design starts from published open-hardware files (简单的怀旧MW/SW/FM 四波段收音机, TDA2030功放; schematic, PCB and BOM available) with our own modifications.

Could you quote:
1. PCB fabrication + SMT assembly for [50] prototype units and [500 / 1,000] production units, including component sourcing (we provide the BOM with manufacturer part numbers).
2. NRE, stencil and test-fixture costs, and your DFM review fee if any.
3. Lead time from file approval to shipment, and your QC / functional-test process.
4. Box build (enclosure, cable, packaging) if you offer it.
5. Terms: EXW / FOB Shenzhen or DDP [your city]; payment terms for a first order.

Design files: [link to Gerber, BOM and pick-and-place files].

Best regards,
[your name] · [your company] · [website] · [phone / WhatsApp]
```

**B. 中文版**

```email
主题：基于开源设计文件的PCBA报价 — Build-a-Radio Workshop Kit，[50]台样机 + [500]台量产

[公司]销售团队，您好：

我是[姓名]，[国家][公司]的创始人。我们正在开发一款Build-a-Radio Workshop Kit：A no-code, solder-it-yourself MW/SW/FM radio kit in a laser-cut wooden case for schools, makerspaces and corporate team workshops。设计基于已公开的开源硬件文件（简单的怀旧MW/SW/FM 四波段收音机, TDA2030功放；含原理图、PCB和BOM），并做了我们自己的修改。

请报价：
1. [50]台样机和[500 / 1,000]台量产的PCB制板+SMT贴片，含元器件采购（我们提供带厂商料号的BOM）。
2. NRE、钢网和测试治具费用，以及DFM评审费用（如有）。
3. 从文件确认到出货的交期，以及贵司的QC/功能测试流程。
4. 如可提供，整机组装（外壳、线材、包装）报价。
5. 贸易条款：深圳EXW/FOB或DDP到[城市]；首单付款条件。

设计文件：[Gerber、BOM和坐标文件链接]。

祝好，
[姓名] · [公司] · [网站] · [电话 / WhatsApp]
```
<!-- who-to-contact:end -->

## 6. Next steps (this week)
1. Order 10 of the open four-band PCBs and the parts; build two tonight; check the project's licence on the OSHWHub page.
2. Write the one-page offer and send it to 30 physics teachers and 10 makerspaces.
3. Ask a test lab for a quote for a receive-only RED assessment so the certification line in the economics is a real number.

Want help sourcing or building this? Talk to us via www.gongbans.com.
